- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Relay module Relays are available in different forms – from modular terminal enclosures to plug-in bases for terminal rail mounting. For switching and amplification of digital signals in automation engineering as well as for electrical isolation between control and load circuit. The input voltages (coil voltage) lie between 5 and 230 V AC/DC depending on type. Different types of contacts such as NOC, NCC and CO contacts are available at the output The use of different contact materials enables the switching of power ratings from just a few mW to max. 4 kVA. Industrial -
Description This is a paperless recorder that displays measured data on the LCD is real time and stores data in Compact Flash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 36 channels at the maximum. The data stored in Compact Flash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.) Industrials- Oil & Gas
- Pulp & Paper
-
Description This is a paperless recorder that displays measured data on the LCD is real time and stores data in Compact Flash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 18 channels at the maximum. The data stored in Compact Flash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.) Industrials- Oil & Gas
- Pulp & Paper
-
Description This is a paperless recorder that displays measured data on the LCD is real time and stores data in Compact Flash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 6 channels at the maximum. The data stored in Compact Flash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.) Industrials- Oil & Gas
- Pulp & Paper
-
Description This is a paperless recorder that displays measured data on the LCD is real time and stores data in Compact Flash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 18 channels at the maximum. The data stored in Compact Flash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.) Industrials- Oil & Gas
- Pulp & Paper
-
Features The Ranarex Portable Gas Gravitometer is an easy-to-use, fast responding gas gravitometer that is used to determine the specific gravity of a process gas as compared with air. This unit offers multiple scales and field-proven accuracy within 0.05% of actual value at any reading. Dual ranges are available: 0.52-1.03 and 0.097-1.90 relative density (specific gravity). Plant and process operators need a reliable, simple means of confirming the quality or mixture of process gases. The means used to perform these tests must be reliable, accurate, and very affordable. For many processes and situations, gas quality can be easily inferred through a simple analysis of the gas mixture's specific gravity as opposed to a complex spectral analysis. Industrial- Oil & Gas
- Chemical & Petrochemical
-
Application Enclosures feature a raised, hinged, overlapping cover design that ensures a more-secure seal and offers increased internal space for mounting components. Available with solid and window covers. Latches provide easy access and security. Size 8.75 x 6.88 - 16.75 x 14.88 -
Description Trinity Touch Wiring Ducts is the product, available in wide range to accommodate wires and cables for the smallest wall mounted panel to larger integrated systems. -
PUSH IN spring connection The sturdy, direct connection for extreme current and voltage requirements in all power electronics applications such as solar inverters, frequency converters, servo-controllers and power supplies. Industrial- Electronic
- Other
-
PUSH IN spring connection The innovative quick connector - simple, safe and economical: PCB terminals with spring connection and direct PUSH IN technology. A milestone in connection technology. Amazingly simple and simply amazing in practice: Connect and easily detach solid wires or wires with wire-end ferrules without using tools Processed automatically in the reflow or vapour phase Potentials and clamping points marked clearly by coloured push buttons World-class design-in and processing phases, and suitable for a vast range of applications. Industrial- Electronic
- Other
-
Description FCX-AIII series transmitters are electronic transmitters which use electrostatic capacitance sensors. They feature compact design, high accuracy, and long-term stability, and offer a variety of diaphragm materials. You can select from: type L housing suited to a vertical pipe, type T housing to horizontal pipe, and direct mount type. Industrials- Oil & Gas
- Pulp & Paper
-
nVent ERICO offers a wide range of halogen free lug-to-lug, lug-to-tunnel, and tunnel-to-tunnel power terminals and fixing assemblies. The tinned copper block design allows for connections using copper or aluminum conductors while the accessible tunnels and studs allow for easy connections that can be visually inspected through the adjustable finger safe transparent cover. Conveniently gangable to allow for the construction of multi-pole power blocks, the power terminals are easily mounted onto DIN rails or directly to the panel itself using screws. Features Lug-to-Lug Power Terminals (SBLL 250, 500, 800)- Tinned copper block allows for copper or aluminum conductor connections
- Accessible studs allow for easy connection of sections of nVent ERIFLEX Flexibar or other conductors
- Design allows for visual inspection of conductor and confirmation of connection
- Adjustable transparent cover
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- SBLEC Power Terminals Fixing Accessory required for direct panel mount
- Halogen free
- RoHS compliant
- Tinned copper block allows for copper or aluminum conductor connections
- Accessible studs and tunnels allow for easy connection of nVent ERIFLEX Flexibar and other conductors
- Design allows for visual inspection of conductor and confirmation of connection
- Voltage detection and measurement connection
- Adjustable transparent cover
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- SBLEC Power Terminals Fixing Accessory required for direct panel mount
- Halogen free
- RoHS compliant
- Tinned copper block allows for copper or aluminum conductor connections
- Accessible tunnels allow for easy connection of wire
- Design allows for visual inspection of conductor and confirmation of connection
- Adjustable transparent cover
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- SBLEC Power Terminals Fixing Accessory required for direct panel mount
- Halogen free
- RoHS compliant
- Attach power terminal fixing accessory to back of power terminals for direct panel mounting or DIN rail end cap mounting
- Easily clips onto DIN rail or mounts to panel with screws
- Halogen free
-
Power supplies Power supplies from Weidmüller have long since proved their worth in supplying electrical modules. They can therefore be used safely in harsh industrial environments, in small businesses and in living areas, and have been granted international approvals. Weidmüller provides power supplies and additional components for industrial applications: unregulated power packs primary switched-mode power units DC/DC converters UPS control modules Electronic fuse Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Features PBC Braided Power Shunt- Ideal for transformer-busduct link
- Solid palms can be drilled to fit customer specific designs
- Extra flexible power connection and good resistance to vibration
- Press welded laminations are welded to each other through direct current applied to pieces under pressure
- Press welding forms a solid palm with the properties of a plain bar
- Smaller cross section for same capacity
- Runs cooler than equal section
-
Power connectors - 7.00 mm pitch - STV series Tried-and-tested power connector system with TOP or leaf spring system. Versatile use. Industrial- Electronic
- Other
-
nVent ERIFLEX Power Blocks are the main DIN mounted output/input devices for connection between primary and secondary switchboard, or main input/output connection for machine or industrial equipment (such as invertor, air conditioning machines, etc.). The high short circuit rated large cross section blocks offer time savings and reliability in every panel configuration. The complete Power Blocks range offers multiple connection types with up to four cables, nVent ERIFLEX Flexibar Advanced, or IBS/IBSB Advanced power braids. Features- Can be connected with round cross section cable or flat connection system like nVent ERIFLEX Flexibar Advanced or IBS/IBSB Advanced Insulated Braided Conductor
- Compact power block with high short circuit current rating
- Tinned copper or aluminum block allows for copper or aluminum conductor direct connections, or using ferrule
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- Voltage detection and measurement connection
- 95% fill ratio
- Halogen free
- RoHS compliant
-
Powder and Bulk Solids Flowmeter When a pukverized material charged from a leader falls naturaly from a fixed height the horizonal component of the impact force exerted on the sensing plate will be proportioner to the instantaneous weight flow of the material. This is the basic principle of operation of the impactline Flowmeter. Related Market 1. Petrochemical 2. Coal fire Power 3. Steel 4. Pulp & Paper -
Polyester Enclosure Glass-fibre-reinforced polyester enclosures are a high-quality and affordable solution for electrical connections. These enclosures are ideal wherever corrosion resistance, shock resistance and a high class of protection are required. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Polycarbonate The polycarbonate enclosures of the MPC series are ideal for building into electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. The polycarbonate enclosures of the MPC series are ideal for building into electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. The polycarbonate enclosures of the MPC series are ideal for building into electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. The polycarbonate enclosures of the MPC series are ideal for building into electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Description ZQV 2.5N/10 GE- W-Series, Cross-connector, For the terminals WDU 2.5, WTR 2.5 No. of poles: 10
- W-Series, Cross-connector, For the terminals WDU 4, WTR 4, No. of poles: 10
- W-Series, Cross-connector, For the terminals WDU 240, No. of poles: 2
-
When working with live voltages, you must follow special guidelines and use special tools - tools which have been specially produced and tested for this purpose. Weidmüller offers a complete line of pliers which comply with national and international testing standards. All pliers are produced and tested according to DIN EN 60900. The pliers are ergonomically designed to fit to the hand form, and thus feature an improved hand position. The fingers are not pressed together - this results in less fatigue during operation. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Application- The Platinum 2.5K Portable Multi-Function Recorder is packaged in a rugged case with quick connect interfaces for fast and simple field connection.
- Interface cables are provided with shrouded banana jacks that couple easily with a variety of measurement CT’s and voltage scaling devices offering complete flexibility for power utility and industrial use.
- High-speed sinusoid data for traditional fault recorder analysis
- Slower speed data for disturbance or swing recording
- Continuous logging of RMS and phasor data for disturbance monitoring
- Steady-state logging of RMS and harmonic spectrum values
- System frequency for power quality analysis
- Number of Channels 8 analog and 16 digital Voltage Inputs
- 63.5 or 110 V RMS nominal
- 480 or 600V RMS nominal (via external box) Current Inputs
- 1 A or 5 A RMS nominal (thru current transformers, other ranges available) Frequency Response
- DC – 1/2 sampling rate (1/4 sampling rate for 384 samples per cycle only) Accuracy
- Better than 0.1% of full scale Digital Inputs
- 24/48/125/250 VDC normally open or closed wetted contact
- Optional internal GPS receiver with 1 PPS output for phasor measurement Accuracy
- Normally better than +/- 60 ns
- 30 lbs. (DIM)
-
Application- The Platinum 2.5K Portable Multi-Function Recorder is packaged in a rugged case with quick connect interfaces for fast and simple field connection.
- Interface cables are provided with shrouded banana jacks that couple easily with a variety of measurement CT’s and voltage scaling devices offering complete flexibility for power utility and industrial use.
- High-speed sinusoid data for traditional fault recorder analysis
- Slower speed data for disturbance or swing recording
- Continuous logging of RMS and phasor data for disturbance monitoring
- Steady-state logging of RMS and harmonic spectrum values
- System frequency for power quality analysis
- 8 analog and 16 digital Voltage Inputs
- 63.5 or 110 V RMS nominal
- 480 or 600V RMS nominal (via external box) Current Inputs
- 1 A or 5 A RMS nominal (thru current transformers, other ranges available) Frequency Response
- DC – 1/2 sampling rate (1/4 sampling rate for 384 samples per cycle only) Accuracy
- Better than 0.1% of full scale Digital Inputs
- 24/48/125/250 VDC normally open or closed wetted contact
- Optional internal GPS receiver with 1 PPS output for phasor measurement Accuracy
- Normally better than +/- 60 ns
- 30 lbs. (DIM)
-
Description WPE 2.5- PE terminal, Screw connection, 2.5 mm², 300 A (2.5 mm²), green / yellow
- PE terminal, Screw connection, 4 mm², 480 A (4 mm²), green / yellow
- PE terminal, Screw connection, 6 mm², 720 A (6 mm²), green / yellow
- PE terminal, Screw connection, 10 mm², 1200 A (10 mm²), green / yellow
- PE terminal, Screw connection, 16 mm², 1920 A (16 mm²), green / yellow
- PE terminal, Screw connection, 35 mm², 4200 A (35 mm²), green / yellow
- PE terminal, Screw connection, 50 mm², 6000 A (50 mm²), green / yellow
- PE terminal, Screw connection, 95 mm², 11400 A (95 mm²), green / yellow
- PE terminal, Screw connection, 95 mm², 11400 A (95 mm²), green / yellow
- PE terminal, Screw connection, 120 mm², 14400 A (120 mm²), green / yellow
-
The sturdy, direct connection for extreme current and voltage requirements in all power electronics applications such as solar inverters, frequency converters, servo-controllers and power supplies. Expect more than just PCB terminals: · High-power: 150 A / 1000 V (IEC) or 127 A / 600 V (UL) · Application-oriented scalability: connection cross-sections from 16 mm² to 50 mm² · Simple UL approval of the device up to 600 V · Zero-maintenance steel clamp for screw connections that are resistant to vibration -
The pluggable PCB connection is the established standard in process and manufacturing automation as well as the measurement and control industry.- The wide line with many product series, provides design flexibility, efficient processing and safe, intuitive handling: 36 connections at 3.50 mm pitch, highest level of power reserves in 3.81 mm pitch and the largest application area in 5.08 mm pitch
- Application-oriented connection systems, from clamping-yoke screw connections to PUSH-IN spring connections
- A wide range of reflow compatible products for automated SMT processes
- Multi-row and multi-layer designs up to 48-pole
-
5 SLD 5.00 2-tier male header with parallel pin arrangement. The solder pin length is optimised for wave flow soldering. The pin headers provide space for labelling and can be coded. -
'PUSH IN - Weidmüller's innovative connection system simplifies the wire connection process. The benefits for users and applications: High component density because of small pitch. Simply insert the prepared wire - and you're done Simplified processing, thanks to integrated push buttons for opening the terminal point Intuitive handling – since the conductor entry and handling areas are clearly separated -
Application- Power quality monitor--measures voltage and frequency profiles, voltage dips and surges, loss or supply, harmonic content, flicker, voltage and current imbalance
- Transient fault recorder--analog inputs are sampled at up to 128 samples per cycle with a maximum record length of 2 seconds
- Disturbance Recorder/Logger--analog inputs are sampled at up to 2 samples per cycle with RMS measurements recorded up to one minute
- Trend Recording--input and computed quantities are logged as maximum, minimum and average quantities every minute for up to 16 weeks.
- Remote Capabilities-via Ethernet or modem, and the process can be automated using the record's Auto-Call or Auto-Poll features.
- Software--wide range of application software for communicating, configuring, downloading, displaying and analyzing recorded data. Auto-poll/Call automates the complete process of retrieving your recorded data.
- 8 (4 voltage, 4 current) consult factory for other configurations Voltage Inputs
- 150/300/600 RMS maximum, Star (wye) or delta connections Current Inputs
- 1/5/100/200/500/1000 A RMS nominal thru external CTs. designed to record to 40% over-range Frequency Response
- 40Hz-3kHz. (+0dB, -3dB for voltages) DC-3kHz (+0dB for currents) Accuracy
- Better than 0.2% of full scale
- 32,768 Hz internal crystal oscillator
- 1 ms
- Time and date (including leap year and day of the year) Synchronization
- 50/60 Hz from voltage input
- Wall (internal terminals) — 11.75 in. x 16.0 in. x 8.25 in. (300 mm x 400 mm x 210 mm)
- 19" Rack Mounting — 13.25 in. x 19.0 in. x 5.25 in. (336 mm x 482 mm x 133 mm)
- Portable — 14.25 in. x 13.75 in. x 5.25 in. (362 mm x 349 mm x 133 mm) Weight
- 13.2-17.6 lbs. (6-8 kg) depending on enclosure style
-
OMNIMATE Power for IT networks – scalable to 50 kVA Tailor-made solutions for special requirements More standard-compliance means fewer compromises: OMNIMATE Power for IT networks has integrated features incorporated as standard across the range. This makes the design-in and approvals process simpler and makes them safer and more reliable in operation. Results for the application and advantages for the user: unlimited use in 400-V IT systems and touch safety according to IEC 61800-5-1 (+ 5.5 mm). The self-snapping one-handed safety flange enables intuitive and safe usage. Operational reliability is guaranteed by the automatic interlock feature during the plug-in process. In conclusion: You need no additional device covering. The application-oriented design means that no compromises are necessary during the approval process. Industrial- Electronic
- Other
-
OMNIMATE Power HP The pluggable connections for power electronics - optimised for modern drive technologies, e.g. motor starters, frequency converters and servo-controllers. OMNIMATE Power sets the new standard – with increased safety and innovative solutions such as the pluggable shield, integrated signal contacts and one-handed operation. The three product lines offer you further advantages: · Application-oriented scalability: from the compact 4 mm² connector for 29 A (IEC) or 20 A (UL) up to the sturdy 16 mm² connector for 76 A (IEC) or 54 A (UL) · Unlimited usage up to 1,000 V (IEC) or 600 V (UL) · A variety of application optimised mounting options Industrial- Electronic
- Other
-
OMNIMATE Power BV / SV 7.62HP Hybrid – for power, signals and EMC Three functions in one. The OMNIMATE Power Hybrid connector provides developers and users with the perfect three-in-one solution. This hybrid motor connector simultaneously unites power, signals and pluggable EMC shield support. Thus you save space on the PCB, on the outer side of the housing, and in the electrical cabinet. The self-snapping one-handed interlock mechanism requires only one plugging step and thus speeds up installation and maintenance procedures. It is easy to handle and interlocks automatically – even in difficult installation positions. The unique shielding shape and slender 30° wire entry enable a space savings of up to 10 cm between rows. Industrial- Electronic
-
NPN-PNP inverter Passive M12 distributors are available in all conceivable forms and configurations. Furthermore, a number of special versions, e.g. SAI distributors for EX zones or the ergonomic M8, are available only from Weidmüller. These innovative products are backed up by numerous proprietary rights. Industrial Machinery, device manufacturer -
Description DDM-TMA1 (its nick name is Tamaichi) is designed to measure the dust concentration in wet flue gases. The measuring principle of DDM-TMA1 is Non-sampling Light Scattering method. The wet flue gas passes inside of the high performance heater which vanishes the mist in the wet flue gases, and the light scattering dust detector measures just the dust concentration in the wer flue gases. The air curtain prevents the wet flue gas flow around the detection area from interfering with the detection area. DDM-TMA1 can monitor dust concentration even in heavy wet flue gases. Industrials- Oil & Gas
- Chemical & Petrochemical
- Power
- Steel
- Pulp & Paper
-
- Size 150 mm - For corrosive process fluids and atmospheres - Accuracy ± 2 % F.S. - Static pressure max. 100 bar - Housing and wetted parts stainless steel -
- Size 100 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - Wetted parts Stainless steel (MTX5) or Brass (MTA5) For non-corrosive (MTA5) and corrosive gases (MTX5) -
- Size 50 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - Wetted parts Stainless steel (MTX5) or Brass (MTA5) - For non-corrosive (MTA5) and corrosive gases (MTX5) -
- Size 63 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - For clean and non-corrosive gases -
- Size 50 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - For clean and non-corrosive gases -
- Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Mechanical contacts 1 or 2 set points - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere -
Description TS 35X7.5/LL 2M/ST/ZN- Mounting rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanized, chromium-plated
- Mounting rail, TS 35, TS 35 x 15, with slot, Steel, galvanized, chromium-platedTS
- Mounting rail, TS 35, TS 35 x 7.5, without slot, Stainless steel, untreated
-
Description TS 35X7.5/LL 2M/ST/ZN- Mounting rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanized, chromium-plated
- Mounting rail, TS 35, TS 35 x 15, with slot, Steel, galvanized, chromium-plated
- Mounting rail, TS 35, TS 35 x 7.5, without slot, Stainless steel, untreated
-
Description ADT 2.5 2C - Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A, Dark Beige ADT 2.5 2C BL - Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A,Blue ADT 4 2C - Test-disconnect terminal, PUSH IN, 4 mm², 500 V, 20 A, Dark Beige ADT 4 2C BL - Test-disconnect terminal, PUSH IN, 4 mm², 500 V, 20 A,Blue -
Description ZDU 2.5/2X2AN/D+- Z-series, Component terminal with diode, Feed-through terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Beige
- Z-series, Component terminal with diode, Feed-through terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Beige
-
Modular PE terminal blocks 1 tier ZPE 2.5 - PE terminal, Tension clamp connection, 2.5 mm², 300 A (2.5 mm²), green / yellow ZPE 4 - PE terminal, Tension clamp connection, 4 mm², 480 A (4 mm²), green / yellow ZPE 6 - PE terminal, Tension clamp connection, 6 mm², 720 A (6 mm²), green / yellow ZPE 10 - PE terminal, Tension clamp connection, 10 mm², 1200 A (10 mm²), green / yellow ZPE 16 - PE terminal, Tension clamp connection, 16 mm², 1920 A (16 mm²), green / yellow ZPE 35 - PE terminal, Tension clamp connection, 35 mm², 4200 A (35 mm²), green / yellow Modular PE terminal blocks 2 tier ZDK 2.5 - Double-tier terminal, PE terminal, Tension clamp connection, 2.5 mm², 300 A (2.5 mm²), green / yellow -
A2C 2.5 PE - PE terminal, PUSH IN, 2.5 mm², green / yellow A2C 4 PE - PE terminal, PUSH IN, 4 mm², green / yellow A2C 6 PE - PE terminal, PUSH IN, 6 mm², green / yellow A2C 10 PE - PE terminal, PUSH IN, 10 mm², 1000 V, green / yellow A2C 16 PE - PE terminal, PUSH IN, 16 mm², 1000 V, green / yellow -
· Size mm. : 40 · For corrosive gasses and liquids · Class 2.5 according to EN837-1 · Wetted parts Stainless steel · Case stainless steel -
- Series: MMN5 - Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Wetted parts Stainless steel (MEP) or Monel (MMN) - Lloyds Register Approval - Safety version S3 according to EN 837-1 - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 150 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MIX) or Monel (MIM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 63 · For non-corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Case material: Stainless steel · Wetted parts: Brass · OEM applications · Liquid-filled for applications with pulsations or vibrations -
· Size mm. : 150 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MIX) or Monel (MIM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
Application Use stylish Concept EMC Enclosures with their convenient quarter-turn latches in indoor or outdoor applications to contain stray electromagnetic interference (EMI) signals produced by internal components and to shield those components from external EMI/RFI interference. Size 10.20 x 10.20 - 34.20 x 22.20 -
Pressure gauge with contact Series: MG5 (With inductive contact) Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Inductive contacts with sensor according to EN 60947-5-6 (NAMUR) - Option : liquid-filled for applications with pulsations or vibrations - Option: case material 1.4404 (316L) for aggressive atmosphere -
- Size 150 mm - For corrosive process fluids and atmospheres - Class 1 according to EN 837-1 - Static pressure max. 400 bar - Wetted parts stainless steel, monel or hastelloy - Option : case material 1.4404 (316 L) for aggressive ambience - Option : solid-front case -
- Size 100 mm - For corrosive process fluids and atmospheres - Class 1 according to EN 837-1 - Static pressure max. 400 bar - Wetted parts stainless steel, monel or hastelloy - Option : case material 1.4404 (316 L) for aggressive ambience - Option : solid-front case -
·Size mm. : 160 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel · Approval Lloyd`s Register · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive ambience -
· Size mm. : 100 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MEX) or Monel (MEM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 63 · For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts: Stainless steel · Case with crimped bezel ring · Lloyds Register Approval · Option: Liquid-filled for applications with pulsations or vibrations · Option: Case material 1.4404 (316L) for aggressive atmosphere -
· For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts Stainless steel(MEX) or Monel (MEM) · Lloyd`s Register approval - Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
- Series: MEP5 - Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Wetted parts Stainless steel (MEP) or Monel (MMN) - Lloyds Register Approval - Safety version S3 according to EN 837-1 - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 100 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts: Stainless steel · Lloyds Register Approval · Option: Liquid-filled for applications with pulsations or vibrations · Option: Case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 63 · For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts Stainless steel (MEX) or Monel (MEM) · Lloyd`s Register approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
- Size 150 mm - For corrosive gasses and aggressive atmosphere - Class 1.6 and 2.5 according to EN 837-3 - Wetted parts Stainless steel and Viton® FKM - Option : case material 1.4404 (316L) for aggressive atmosphere -
- Size 100 mm - For corrosive gasses and aggressive atmosphere - lass 1.6 and 2.5 according to EN 837-3 - Wetted parts Stainless steel and Viton® FKM - Option : case material 1.4404 (316L) for aggressive atmosphere -
- Size 150 mm -Low pressure measurement - For non-corrosive gasses - Accuracy +/- 2% F.S. - Static pressure max. 250 mbar - Option: case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 63 · For non-corrosive gasses and liquids · Class 2.5 according to EN 837-1 · Wetted parts: Brass · OEM applications -
Markings- DEK 5/5 Plus MC (1 sheet=100 tag)
- DEK 5/5 Plus MC (1 sheet=100 tag)
- WS 12/5 MC (1 sheet = 72 tags)
-
- Size 150 mm - For corrosive process fluids and atmospheres - Absolute pressure measurement - Accuracy ± 2 % FS - Overpressure max. 25 bar - Housing and wetted parts stainless steel - Option: Liquid-filled for applications with pulsations or vibrations -
Pressure gauge with contact Series: MA35 (With analog output) Size 100 mm - Local indication of pressure - Output signal: 4 ... 20mAB -
M8 distributor The new slim M8 line from Weidmüller. This range of products is characterised by the marking options at all connection positions. Even the 4-way distributor with 8-pole M12 has adequately large markers at all M8 connection positions. Furthermore, this distributor is shorter than many conventional M8 designs. Very narrow, short and flat M8 distributor. The range is supplied with 4 to 12 M8 connection positions, 3 or 4 poles. Hybrid variants of the M8 are also possible on request. The M8 line is equipped with transverse holes. Industrial Machinery, device manufacturer -
- Size 150 mm - Gauges with bellows Ø 150 mm - For corrosive fluids and atmospheres - Dry contacts (CES) - Electrical part conforms to Low Voltage Directive DBT 73/23/CE -
M5 distributor Besides being extremely compact, these modules are also very low in weight. But they are still amazingly easy to handle. M5 distributors are supplied as 4- and 8-way modules each with M12, M16 or fixed cable outlets. The plug-in connectors are in 3 or 4 pole design. Marking: Each plug-in station is identified with the plug-in station number. Every initiator LED can be allocated precisely with the letters A and B. Moreover, the distributor and every connection position can be labelled if required. Industrial Machinery, device manufacturer -
- Size 150 mm - Gauges with bellows Ø 150 mm For corrosive fluids and atmospheres - Dry contacts (CES) - Electrical part conforms to Low Voltage Directive DBT 73/23/CE -
M12 distributor Passive M12 distributors are available in all conceivable forms and configurations. Furthermore, a number of special versions, e.g. SAI distributors for EX zones or the ergonomic M8, are available only from Weidmüller. These innovative products are backed up by numerous proprietary rights. Industrial Machinery, device manufacturer -
Lightning and surge protection (SPD) The priority you give to overvoltage protection depends on your willingness to take risks! Perhaps you think "it’ll never happen to me". Then you won’t have lost anything, but will have gained only very little. However, the subject of overvoltage is then a daily worry for you. But if you wish to be on the safe side, you should include overvoltage protection in your corporate strategy. You will profit from such an investment in operational safety and can prevent a disaster with Weidmüller's surge protection for power, signal and data. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Description This water level transmitter is used for measuring the level of clean water, sewage water, well, river, etc. The detector is placed on the bottom of the water, and the water head pressure acting on the pressure receiving diaphragm is detected, converted into a current signal and then transmitted to a receiving instrument via the connector terminal. Industrial- Oil & Gas
- Pulp & Paper
-
Description The FCX-AIII level transmitter accurately measures liquid level and transmits a proportional 4 to 20 mA signal. The transmitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality. Industrial- Oil & Gas
- Pulp & Paper
-
Features L&T Valves launches a smart flow-control solution that enhances plant safety and reliability - L&T Valves Asset Management Program, LAMP. This IoT-ready remote valve performance monitoring system leverages expertise in valve manufacture as well as system design and integration. At the core of LAMP is a time-tested SIL3-capable valve - Ball, Butterfly, DBB Plug, Gate or Globe. Each valve is equipped with ValvTrac™ digital traceability tag that cross-links valve signature to traceability information such as valve test certificates, material test certificates, and installation, operation and maintenance manuals. The valves are upgraded to ‘Smart Valves’ by integrating them with next-generation smart sensors that measure parameters such as torque, leakage, vibration, pressure, temperature and position. The data is relayed real-time to a secure, dedicated cloud computing platform where it is analyzed to provide complete valve health and diagnostic information. Valve users can access information through a secure login, or port the data to the native asset management system through any standard field communication protocol (HART, WirelessHART, Foundation Fieldbus, etc.). To a customer, knowledge is trust; the more he knows about the state of a valve, the more confident can he be about its performance. Thus LAMP takes the guesswork out of valve maintenance and allows customers to transition from preventive maintenance based on thumb rules to predictive maintenance based on real data. -
Kits The RockStar® kits normally consist of a male insert, a female insert, a plug housing, a bulkhead housing and a cable gland. Weidmüller offers a range of standard plug-in connector combinations with metric or PG cable entry threads, with screw connection or PUSH IN connection. Industrial- Machinery
-
Junction Box The Klippon® brand has long stood for competence and quality in housings, particularly when customer solutions for standard industrial applications and applications in explosive risk zones are concerned. Weidmüller meets these requirements with its range of steel sheet enclosures in the new Klippon® TB series, available in Multi-Hinge (MH) and Quarter-Lock (QL) versions, the Klippon® STB series and the aluminium enclosures of the Klippon® K series. The portfolio is rounded off with the polyester enclosures of the Klippon® POK series and the polycarbonate enclosures. Irrespective of which application users are planning, Weidmüller offers numerous precisely fitting housing solutions and individual services: turnkey enclosures with customer-specific configurations such as terminal rails, drilled holes, cable glands, cutouts, special coatings and much more besides. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
JACKPAC® IP68- JACKPAC® IP20 surge protection
- JACKPAC® test adapter
-
The IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. The analyzer is capable of measuring up to eight wavelengths in a gas or liquid phase sample. Sample handling and conditioning systems are available as an option that is integrated into the IPS-4s sample cell enclosure. Features- Measures up to 8 wavelengths
- Low cost of ownership
- No annual, routine maintenance
- No moving parts
- IP65 (NEMA 4X optional)
- Integrated, customizable sample system
- Ethernet and MODBUS communications
- Oil & Gas
- Chemical & Petrochemical
- Power
-
Interfaces The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Features ISO-TP Low Voltage Insulators, Metric Thread- Halogen free
- High resistance to leakage current
- Great stability of electrical and mechanical parameters
- Fiberglass reinforced
- UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC
- RoHS compliant
- Halogen free
- High resistance to leakage current
- Great stability of electrical and mechanical parameters
- Fiberglass reinforced
- UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC
- RoHS compliant
-
Features IBS Advanced Round Insulated Braided Conductor, Halogen Free- Resistant to vibration, improving reliability and performance
- Insulated by high-resistance, halogen free, flame retardant and low smoke material
- Tinned copper provides superior corrosion resistance• Improves assembly flexibility and aesthetics
- Quick and easy installation
- No additional cutting, stripping, crimping and punching needed
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- Small wire diameter provides maximum flexibility
- Dramatically smaller and more flexible than comparable cable based on ampacity
- Better power density than cable with lower skin effect ratio
- Reduces total installation cost
- RoHS compliant
- Suitable for all main molded case circuit breakers
- Resistant to vibration, improving reliability and performance
- Insulated by high-resistance, halogen free, flame retardant and low smoke material
- Tinned copper provides superior corrosion resistance
- Improves assembly flexibility and aesthetics
- Quick and easy installation
- No additional cutting, stripping, crimping and punching needed
- Integral palm without lugs or terminals reduces material and assembly weight
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- DNV GL® and Bureau Veritas certified for marine and offshore applications
- Small wire diameter provides maximum flexibility
- Dramatically smaller and more flexible than comparable cable based on ampacity
- Better power density than cable with lower skin effect ratio
- Reduces total installation cost
- RoHS compliant
- Tinned copper allows for copper or aluminum conductor connections
- Suitable for all main 125/160 A electrical devices and specifically molded case circuit breakers
- Resistant to vibration, improving reliability and performance
- Improves assembly flexibility and aesthetics
- Quick and easy installation
- No additional cutting, stripping, crimping and punching needed
- Small wire diameter provides maximum flexibility
- Halogen free solution for applications requiring a low smoke solution
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- DNV GL® certified for marine and offshore applications
- High working temperature
- RoHS compliant
-
Inserts A heavy-duty connector consists of a connector insert and its protective housing. The insert is therefore the heart of the heavy-duty connector. It is responsible for electrical functioning. Connector inserts from Weidmüller are made from high-quality insulation materials, which allow secure transmission of high voltages in a tight space. Moreover, we use only a single type of plastic in our entire product line. This plastic is UL listed, and suitable for railway applications. This allows unlimited world-wide use of the RockStar® connector. Industrial- Machinery
-
Industrial Ethernet Weidmüller Industrial Ethernet components are the perfect link the data communication between Ethernet enabled devices in industrial automation. By supporting various topologies and protocols, they can be used in many industrial applications. As a complete provider of industrial network infrastructure for machine and equipment manufacture, we offer a wide range of switch products to suit the individual needs of our customers. In particular, Gigabit Switches (unmanaged and managed) and media converters, Power-over-Ethernet switches, WLAN modules and serial/Ethernet converters to meet the highest requirements and provide a reliable and flexible Ethernet communication. An extensive passive product portfolio consisting of RJ 45 and fibre optic connectors and cables make Weidmüller your partner for industrial Ethernet solutions. -
Impactline Flowmeter When a pukverized material charged from a leader falls naturaly from a fixed height the horizonal component of the impact force exerted on the sensing plate will be proportioner to the instantaneous weight flow of the material. This is the basic principle of operation of the impactline Flowmeter. Related Market 1. Petrochemical 2. Coal fire Power 3. Steel 4. Pulp & Paper -
Impact Feeder Convenient, inexpensive precision feeder for bulk solids, whose accuracy is not influenced by changes in the substance’s characteristics. The capacity ranges from 0-3 t/h to 0-60 t/h Description- The impact Feeder is installed at the hopper's discharge outlet.
- The grain discharged from the hopper is passed through the gate incorprated in the feeder and flows down along the snesing plate.
- The load generated on the sensing plate is converted into an electric signal corresponding to the flow rate by the load cell.
- Based on the control signal, the gate is driven by a built-in motor to control the grain to it's target flow rate.
-
IE-SW-BL08-8TX Network switch, unmanaged, Fast Ethernet, Number of ports: 8x RJ45, IP30, -10 °C...60 °C