241CE II Hydrocarbon Dew Point Analyzer

Features

The 241CE II Hydrocarbon Dew Point Analyzer is a quality control tool for natural gas processing, distribution and consumption. Detection and measurement of hydrocarbon dewpoint is achieved in a single cell, single cycle operation.
The dew point analyzer uses patented chilled-mirror technology. With the 241CE II Hydrocarbon Dew Point Analyzer, all monitoring and measuring of dew points is done automatically under control of an onboard computer, rather than by an operator. The dew point analyzer was designed for unattended operation.
Accurate and objective direct measurement of hydrocarbon dew point temperature at pipeline pressure or Cricondentherm

  • Proprietary three-stage filter provides superior protection
  • Designed for unattended operation with low maintenance
  • Compact design allows mounting in optional enclosures
  • Digital communications vis Modbus RTU protocol
  • Fully integrated sample system
  • Hydrocarbon dew point temperature current output

Industrial

  • Oil & Gas
  • Chemical & Petrochemical

Description

Specifications

Methodology Chilled-mirror
Accuracy Hydrocarbon dew point temperature ±1°C (±2°F)
Sensitivity Temperature ±0.1°C (±0.2°F)
Sample Transport 1/4 inch stainless steel instrument tubing recommended (heat tracing may be required)
Typical Flow 1 to 5L/min. (2 to 10 scfh) depending on sample system configuration and pressure
Ambient Temperature 10°C to 40°C (50° to 104°F)
Cooling Capability Typically 60°C (108°F) below the temperature at the analyzer installation. The cooling
capability of the analyzer is affected by the ambient temperature, sample gas composition and the pressure. (Consult your AMETEK representative for evaluation of your application.)
Highest Measurable Dewpoint Application dependent, typically 15°C (27°F) below the temperature at the analyzer installation
Maximum Working Pressure 13.79 MPa (2000 psi)
Power 120 VAC ±10%, 60 Hz or 240 ±10% VAC, 50 Hz
Power Consumption less than 275 W
Outputs 4-to-20 mA (isolated, looppower by customer or optional self-powered)
Physical Dimensions (H x W x D) 838 x 571.5 x 289 mm (33 x 22.5 x 11.37 in.)
Weight 60 kg (132 lbs.)
Approvals and Certifications Class I, Division 1, Groups C & D
ATEX II 2 G EExdIIBT4
Russian Ex Proof Certification;
1Exd llB T3 X
CE Compliance: Complies with all relevant European Directives

Title

Go to Top