Chemical

Home/Chemical
  • Features The 241CE II Hydrocarbon Dew Point Analyzer is a quality control tool for natural gas processing, distribution and consumption. Detection and measurement of hydrocarbon dewpoint is achieved in a single cell, single cycle operation. The dew point analyzer uses patented chilled-mirror technology. With the 241CE II Hydrocarbon Dew Point Analyzer, all monitoring and measuring of dew points is done automatically under control of an onboard computer, rather than by an operator. The dew point analyzer was designed for unattended operation. Accurate and objective direct measurement of hydrocarbon dew point temperature at pipeline pressure or Cricondentherm
    • Proprietary three-stage filter provides superior protection
    • Designed for unattended operation with low maintenance
    • Compact design allows mounting in optional enclosures
    • Digital communications vis Modbus RTU protocol
    • Fully integrated sample system
    • Hydrocarbon dew point temperature current output
    Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    Details
  • Features AMETEK’s 2850 Moisture Analyzer establishes a new standard in clean gas moisture analyzers: ultrafast response speed, exceptional accuracy, virtually no interferences, multigas compatibility, and on-board measurement verification. This unique combination of capabilities makes the 2850 the moisture analyzer of choice for monitoring process desiccant dryers, instrument air dryers, or air separators, and for industrial gas production and quality assurance. Typical Applications
    • Industrial gas production and quality assurance
    • Cryogenic air separation
    • Process dryers
    Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    Details
  • Features The 3050 Moisture Analyzer series measures trace levels of moisture in a gas through the use of a quartz-crystal oscillator sample cell. AMETEK is the leader in quartz-crystal technology, which for thirty years has offered significant advantages over other measurement techniques: • Most accurate trace moisture measurement technology available • Responds far faster to both increasing and decreasing moisture levels • Specific to moisture in most applications • Provides a much more rugged sensor Because of these advantages, the quartz-crystal oscillator has become the industry standard for applications ranging from ultrahigh purity semiconductor gases to natural gas streams containing 30% H2S. Now, the 3050 analyzers bring the benefits of quartz-crystal technology to a broad spectrum of moisture applications. AME Vision Display Unit AMEVision allows users to continually monitor the measurement and diagnostic information from up to eight 3050 series moisture analyzers. AMEVision provides real-time moisture measurements, trend data, and details a variety of maintenance and troubleshooting information from the 3050. Users can communicate with AMEVision via Modbus RS485 and Ethernet LAN. • Compatible with 3050 models OLV, SLR, DO, and TE • Connect up to eight analyzers on one unit • Trend history • Automatic data capture and logging • Calibration history • Alarm history Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    Details
  • Features The 3050 Moisture Analyzer series measures trace levels of moisture in a gas through the use of a quartz-crystal oscillator sample cell. AMETEK is the leader in quartz-crystal technology, which for thirty years has offered significant advantages over other measurement techniques:
    • Most accurate trace moisture measurement technology available
    • Responds far faster to both increasing and decreasing moisture levels
    • Specific to moisture in most applications
    • Provides a much more rugged sensor Because of these advantages, the quartz-crystal oscillator has become the industry standard for applications ranging from ultrahigh purity semiconductor gases to natural gas streams containing 30% H2S. Now, the 3050 analyzers bring the benefits of quartz-crystal technology to a broad spectrum of moisture applications. AME Vision Display Unit AMEVision allows users to continually monitor the measurement and diagnostic information from up to eight 3050 series moisture analyzers. AMEVision provides real-time moisture measurements, trend data, and details a variety of maintenance and troubleshooting information from the 3050. Users can communicate with AMEVision via Modbus RS485 and Ethernet LAN.
    • Compatible with 3050 models OLV, SLR, DO, and TE
    • Connect up to eight analyzers on one unit
    • Trend history
    • Automatic data capture and logging
    • Calibration history
    • Alarm history
    Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    Details
  • Features 5100 Based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) The 5100 hosts a single laser platform to measure a single gas analyte. The device can measure any one of the following gas analytes: water vapor, methane, hydrogen sulfide, carbon dioxide, and oxygen in process or flue gas. If water vapor is the measured gas analyte, methane can be monitored additionally at percent levels using the same laser. A key feature of the 5100 is the use of a sealed reference cell, which contains a known amount of analyte gas measured, for referencing the emission wavelength of the laser. The use of a reference cell enables both the ability to line-lock the lasers and to continuously verify the instrument calibration. The 5100 is designed to handle sample gases with dew points as high as 55ºC. For higher temperature dew point applications the 5100HD is recommended.
    • All digital signal processing
    • Web-based interface
    • Connectivity by modbus, ethernet and analog
    • Real-time performance monitoring
    • Fully integrated sample handling
    • Resistant to contamination
    • Reference Cell enables Line Lock and Span Verification The 5100 offers high specificity, selectivity, speed of response and great reliability
    Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    Details
  • Features Critical moisture measurement applications include high purity gas production; olefin manufacture, storage, and transmission; semiconductor gases; and industrial gas production and quality assurance. For these applications and more, turn to the 5800 Moisture Analyzer. This analyzer offers a truly remarkable combination of performance benefits: exceptional accuracy, multi-gas compatibility, fast response speed, and wide measurement range. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    Details
  • Features Building upon the success of our quartz-crystal moisture measurement technology, the 5830 is an easy-to-use process moisture analyzer that offers a truly remarkable combination of performance features: exceptional accuracy, multi-gas compatibility, fast response speed, and wide measurement range. The 5830 is ideal for critical moisture measurement applications including high purity gas production, semiconductor gases, and industrial gas production and quality assurance. Equipped with an on-line verification system, this state-of-the-art analyzer is designed to rapidly build and maintain operator confidence in its analyses. The verification system allows you to challenge the analyzer’s sensor at will with either a zero gas or an actual NIST-traceable moisture concentration to check both its baseline stability and responsiveness to real moisture. No other manufacturer offers these exclusive abilities in their moisture analyzers. Industrial
    • Oil & Gas
    • Chemical & Petrochemicaly
    Details
  • Features The 5910 analyzer provides a quantum leap forward in performance across all measurable parameters. The 5910 is sensitive to changes in moisture concentration of less than 500 pptv. We know this because the nominal noise level is below 50 pptv. The result of these phenomenal abilities is an accuracy of better than ±100 pptv or ±10% of reading. Typical Applications Continuous Monitoring : Continuous moisture analysis is a valuable tool for quality assurance and process monitoring. As a quality assurance analyzer, the 5910 verifies that specified gas purity levels are maintained at on‑site separation, bulk delivery and distribution system transfer points, and ultimately, at points-of-use. The 5910 satisfies all the demands of continuous monitoring principally low detection limit, high measurement accuracy, and internal verification. Analytical Carts : The 5910 is the perfect analyzer for temporary monitoring applications for verifying installation, maintenance, or repair of gas distribution systems. Such temporary or spot testing makes excellent use of the unique combination of capabilities provided by the 5910—very fast response speed, especially to decreasing moisture concentrations for monitoring system dry-down; complete compatibility with O2, H and inerts; rapid start-up response; and the ability to quickly change from one gas to another. Industrials
    • Oil & Gas
    • Chemical & Petrochemical
    Details
  • Features Building upon the success of our quartz-crystal moisture measurement technology, the 5920 is an easy-to-use process moisture analyzer that offers a truly remarkable combination of performance features: multi-gas compatibility, exceptional accuracy, on-line verification, fast response speed, and wide measurement range. The 5920 is ideal for critical moisture measurement applications including high purity gas production and semiconductor gases. Equipped with an on-line verification system, this analyzer is designed to rapidly build and maintain operator confidence in its analyses. The verification system allows you to challenge the analyzer’s sensor at will using a zero gas to check its baseline stability to confirm the sensor’s stability and sensitivity to low ppbv moisture concentrations. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    Details
  • Features AMETEK Process Instruments has been the leader in tail gas analysis for over 40 years-with more than 1,100 installed 880 NSL analyzers and more than 100 million hours of run time. The 888, the successor of the 880 NSL uses field-proven and highly reliable UV technology to accurately monitor the H2S and SO2 concentrations in sulfur recovery tail gas. This compact, rugged analyzer mounts directly on the process pipe, eliminating the complexity and safety issues of fiber optic coupled photometers. The 888 is the evolution of a well proven formula. All the best elements of the iconic 880 NSL are still there; Four year lamp life, no shelter required and steam blow back for ammonia salts. Building on this success the 888 offers improvements in a number of key areas. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Power Plant
    Details
  • Features In the past, conventional Claus Sulfur recovery processes were adequately controlled on the basis of ratio or excess process air. The development of new and modified sulfur recovery processes has dramatically changed the analytical requirements placed on the tail gas analyzer. These applications require accurate chemical concentration data over wide dynamic ranges. Selective oxidation processes may require the analyzer to control the H2S/SO2 ratio at values ranging from 1:7 to greater than 10:1. In addition there is an increased need to provide reliable process data during upset conditions to endure correct response to such conditions. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
     
    Details
  • Features The  914 is a built-to-order Continuous Emission Monitor (CEM) that includes all the components needed for a compliance monitoring and reporting project. The system uses dry extractive sampling techniques designed to meet government regulations for all types of compliance monitoring. The sample extraction system of the 914 combines a temperature controlled sample conditioning unit and a heated sampling line to ensure the integrity of the sample gas is reliably maintained. The sample gas is then dried (moisture removed) as required and introduced into the instruments for analysis. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Power Plant
    Details
  • End Plate AEP 2C 2.5 - End Plate for A2C 2.5,A2C 2.5 PE AEP 2C 2.5 BL - End Plate for A2C 2.5 BL AEP 2C 4 - End Plate for A2C 4,A2C 4 PE AEP 2C 4 BL - End Plate for A2C 4 BL AEP 2C 6 - End Plate for A2C 6, A2C 6 PE AEP 2C 10/16 - End Plate for A2C 10, A2C 16, A2C 10 PE, A2C 16 PE AEP 2C 10/16 BL - End Plate for A2C 10 BL, A2C 16 BL AEP 2T 2.5 - End Plate for A2T 2.5 AEP 3T 2.5 - End Plate for A3T 2.5 AEP 4C 2.5 - End Plate for AFS 2.5 CF 2C BK, AFS 2.5 CF 2C 12V BK, AFS 2.5 CF 2C 24V BK AEP 3C 4 - End Plate for AFS 4 2C BK, AFS 4 2C 10-36V BK, AFS 4 2C 30-70V BK, AFS 4 2C 100-250V BK End Stopper AEB 35 SC/1 - A-series, End bracket Cross Connection ZQV 2.5N/10 - Cross Connection for 2.5 mm2, 10 poles ZQV 6N/4 - Cross Connection for 6 mm2, 4 poles ZQV 10N/2 - Cross Connection for 10 mm2, 2 poles ZQV 16N/2 - Cross Connection for 16 mm2, 2 poles  
    Details
  • Accessories In addition to heavy-duty connectors, RockStar® includes the appropriate accessories for effective, functional and safe system cabling; e.g. coding systems, shield clamps, cover plates and replacement seals Industrial
    • Machinery
    Details
  • Aluminium Enclosure The Klippon® brand has long stood for competence and quality in housings – particularly when turnkey, customer-specific solutions for standard industrial applications and applications in explosive risk zones are concerned. Improved products that meet all application requirements: this was Weidmüller's aim when modernising and upgrading the Klippon® K enclosure series. No matter what kind of application the customer is planning; Weidmüller is able to provide a wide range of aluminium enclosures precisely fitting the customer's requirements.  
    Details
  • Analogue signal processing When used for industrial monitoring applications, sensors can record ambience conditions. Sensor signals are used within the process to continually track changes to the area being monitored. Both digital and analogue signals can occur. Normally an electrical voltage or current value is produced which corresponds proportionally to the physical variables that are being monitored Analogue signal processing is required when automation processes have to constantly maintain or reach defined conditions. This is particularly significant for process automation applications. Standardised electrical signals are typically used for process engineering. Analogue standardised currents / voltage 0(4)...20 mA/ 0...10 V have established themselves as physical measurement and control variables. Weidmüller meets the ever increasing challenges of automation and offers a product portfolio tailored to the requirements of handling sensor signals in analogue signal processing The analogue signal processing products can be used universally in combination with other Weidmüller products and in combination among each other. Their electrical and mechanical design is such that they require only minimal wiring efforts. Housing types and wire-connection methods matched to the respective application facilitate the universal use in process and industrial automation applications. The product line includes the following functions: Isolating transformers, supply isolators and signal converters for DC standard signals Temperature measuring transducers for resistance thermometers and thermocouples, frequency converters, potentiometer-measuring-transducers, bridge measuring transducers (strain gauges) trip amplifiers and modules for monitoring electrical and non-electrical process variables AD/DA converters displays calibration devices The products mentioned are available as pure signal converters / isolation transducers, 2-way/3-way isolators, supply isolators, passive isolators or as trip amplifiers. When used for industrial monitoring applications, sensors can record ambience conditions. Sensor signals are used within the process to continually track changes to the area being monitored. Both digital and analogue signals can occur. Normally an electrical voltage or current value is produced which corresponds proportionally to the physical variables that are being monitored Analogue signal processing is required when automation processes have to constantly maintain or reach defined conditions. This is particularly significant for process automation applications. Standardised electrical signals are typically used for process engineering. Analogue standardised currents / voltage 0(4)...20 mA/ 0...10 V have established themselves as physical measurement and control variables. Weidmüller meets the ever increasing challenges of automation and offers a product portfolio tailored to the requirements of handling sensor signals in analogue signal processing The analogue signal processing products can be used universally in combination with other Weidmüller products and in combination among each other. Their electrical and mechanical design is such that they require only minimal wiring efforts. Housing types and wire-connection methods matched to the respective application facilitate the universal use in process and industrial automation applications. The product line includes the following functions: Isolating transformers, supply isolators and signal converters for DC standard signals Temperature measuring transducers for resistance thermometers and thermocouples, frequency converters, potentiometer-measuring-transducers, bridge measuring transducers (strain gauges) trip amplifiers and modules for monitoring electrical and non-electrical process variables AD/DA converters displays calibration devices The products mentioned are available as pure signal converters / isolation transducers, 2-way/3-way isolators, supply isolators, passive isolators or as trip amplifiers. When used for industrial monitoring applications, sensors can record ambience conditions. Sensor signals are used within the process to continually track changes to the area being monitored. Both digital and analogue signals can occur. Normally an electrical voltage or current value is produced which corresponds proportionally to the physical variables that are being monitored Analogue signal processing is required when automation processes have to constantly maintain or reach defined conditions. This is particularly significant for process automation applications. Standardised electrical signals are typically used for process engineering. Analogue standardised currents / voltage 0(4)...20 mA/ 0...10 V have established themselves as physical measurement and control variables. Weidmüller meets the ever increasing challenges of automation and offers a product portfolio tailored to the requirements of handling sensor signals in analogue signal processing The analogue signal processing products can be used universally in combination with other Weidmüller products and in combination among each other. Their electrical and mechanical design is such that they require only minimal wiring efforts. Housing types and wire-connection methods matched to the respective application facilitate the universal use in process and industrial automation applications. The product line includes the following functions: Isolating transformers, supply isolators and signal converters for DC standard signals Temperature measuring transducers for resistance thermometers and thermocouples, frequency converters, potentiometer-measuring-transducers, bridge measuring transducers (strain gauges) trip amplifiers and modules for monitoring electrical and non-electrical process variables AD/DA converters displays calibration devices The products mentioned are available as pure signal converters / isolation transducers, 2-way/3-way isolators, supply isolators, passive isolators or as trip amplifiers.
    Details
  • Assortment Workshops and factories prefer well-organised sets of tools. That results in minimal searching and preparation, and that saves money. Weidmüller implements such knowledge when combining products, characterised by good benefits for users and good functionality. Weidmüller Crimp Sets for cutting, stripping and crimping wire end ferrules provide users with practical toolkits. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • After stripping the insulation, a suitable contact or wire end ferrule can be crimped onto the end of the cable. Crimping forms a secure connection between conductor and contact and has largely replaced soldering. Crimping denotes the creation of a homogeneous, permanent connection between conductor and connecting element. The connection can be made only with high-quality precision tools. The result is a secure and reliable connection both in mechanical and electrical terms. Weidmüller offers a wide range of mechanical crimping tools. Integral ratchets with release mechanisms guarantee optimum crimping. Crimped connections made with Weidmüller tools comply with international standards and regulations.
    Details
    • CTF PV WM4
    Description of article:Crimping tools  for photovoltaic plug-in connectors    
    Details
  • PZ 1.5 Description of article: Crimping tool for non-insulated connectors, 0.5-6 mm² PZ 6/5 Description of article: Crimping tool for non-insulated connectors, 0.5-6 mm² PZ 6 ROTO Description of article:Crimping tool, Crimping tool for wire-end ferrules, 0.14mm², 6mm², Trapezoidal crimp PZ 10 HEX Description of article: 0.14mm², 10mm², Hexagonal crimping PZ 16 Description of article: Crimping tool, Crimping tool for wire-end ferrules, 6mm², 16mm², Indent crimping PZ 50 Description of article:Crimping tool, Crimping tool for wire-end ferrules, 25mm², 50mm², Indent crimping    
    Details
  • CTF 63 Description of article: Crimping tool, Crimping tool for wire-end ferrules, 25mm², 50mm², Indent crimping
    Details
  • CTX 500 Description of article: Crimping tool for coaxial connectors BNC, TNC and N / AF 10.54 CTX 501 Description of article: Crimping tool for coaxial connectors BNC, TNC and N / AF 10.54 CTX 502 Description of article: Crimping tool for coaxial connectors BNC, TNC and N / AF 9.3
    Details
  • HTX LWL Description of article: Crimping tool for fibre-optic cable with 1mm core diameter
    Details
  • HTN 21 Description of article: Crimping tool for non-insulated connectors, 0.5-6 mm²
    Details
  • Description ZQV 2.5/10 GE
    • Z-series, Accessories,cross connection for ZDU 2.5, ZDK 2.5, ZTR 2.5 (10 poles)
    ZQV 4/10 GE
    • Z-series, Accessories,cross connection for ZDU 4(10 poles)
    ZQV 6/24 GE
    • Z-series, Accessories,cross connection for ZDU 6(24 poles)
    ZQV 10/2 GE
    • Z-series, Accessories,cross connection for ZDU 10(24poles)
    ZQV 16/2 GE
    • Z-series, Accessories,cross connection for ZDU 10( 2 poles)
    ZQV 35/2 GE
    • Z-series, Accessories,cross connection for ZDU 35 ( 2 poles)
     
    Details
  • Description ZTR 2.5
    • Test-disconnect terminal, Tension clamp connection, 2.5 mm², 500 V, 20 A, Pivoting, Dark Beige
    ZTR 2.5 BL
    • Test-disconnect terminal, Tension clamp connection, 2.5 mm², 500 V, 20 A, Pivoting, Blue
    Details
  • WTR 2.5
    • Test-disconnect terminal, Screw connection, 2.5 mm², 500 V, 24 A, Pivoting, Dark Beige
    WTR 2.5 BL
    • Test-disconnect terminal, Screw connection, 2.5 mm², 500 V, 24 A, Pivoting, Blue
    WTR 4
    • Test-disconnect terminal, Screw connection, 4 mm², 400 V, 32 A, Pivoting, Dark Beige
    WTR 4 BL
    • Test-disconnect terminal, Screw connection, 4 mm², 400 V, 32 A, Pivoting, Blue
    Details
  • WDTR 2.5
    • Test-disconnect terminal, Screw connection, 2.5 mm², 400 V, 10 A, Pivoting, Dark Beige
    WDTR 2.5 BL
    • Test-disconnect terminal, Screw connection, 2.5 mm², 400 V, 10 A, Pivoting, Blue
    Details
  • ELECTRONIC The Electronics Department develops and markets electronic components for industrial automation, process automation and energy production. These components are used both inside and outside of the electrical cabinet. The focus of the electronics sector is on processing digital and analogue signals. These signals can be converted, standardised, protected and prepared for communication. For these purposes, we offer signal converters and input/output devices for Fieldbus communications based on Industrial Ethernet and Fieldbus. Product solutions are also available for the following fields: surge protection, protecting and amplifying digital signals, supplying devices inside and outside of the electrical cabinet, Ethernet data communication and for pre-assembled system cables. All of these products feature a mechanically convenient installation process, an optimised handling of electrical connections and safe wire connections. The products themselves are well suited for harsh industrial applications. They are suitable for use in a large range of operating temperatures and feature excellent resistance against electromagnetic interference. With this portfolio, the Electronics Department features products which cover the full industrial applications spectrum for the transferring and conditioning of power, signals and data.
    Details
  • Description ZAP/TW1
    • Z-series, Accessories, End plate, Seperation plate for ZDU 2.5,ZPE 2.5,ZTR2.5
    ZAP/TW1 BL
    • Z-series, Accessories, End plate, Seperation plate for ZDU 2.5 BL,ZTR 2.5 BL
    ZAP/TW3
    • Z-series, Accessories, End plate, Seperation plate for ZSI 2.5, ZSI 2.5/LD 28 AC, ZSI 2.5/LD 120 AC, ZSI 2.5/LD250 AC,ZDU 2.5/2X2AN/D+,ZDU 2.5/2X2AN/D-
    ZAP/TW4
    • Z-series, Accessories, End plate, Seperation plate for ZDU 4
    ZAP/TW 4 BL
    • Z-series, Accessories, End plate, Seperation plate for ZDU 4 BL
    ZAP/TW 5
    • Z-series, Accessories, End plate, Seperation plate for ZDU 6, ZPE 6
    ZAP/TW 5 BL
    • Z-series, Accessories, End plate, Seperation plate for ZDU 6 BL
    ZAP/TW ZDU 10
    • Z-series, Accessories, End plate, Seperation plate for ZDU 10, ZPE 10
    ZAP/TW ZDU 10 BL
    • Z-series, Accessories, End plate, Seperation plate for ZDU 10 BL
    ZAP/TW ZDU 16
    • series, Accessories, End plate for ZDU 16, ZPE 16
    ZAP/TW ZDU 16 BL
    • Z-series, Accessories, End plate for ZDU 16 BL
    ZAP/TW ZDK 2.5
    • Z-series, Accessories, End plate, Seperation plate for ZDK 2.5
    ZAP/TW ZDK 2.5 BL
    • Z-series, Accessories, End plate, Seperation plate for ZDK 2.5 BL
    Details
  • Description WAP 2.5-10
    • W-Series, End plate for WDU 2.5 TO WDU 10, WTR 2.5,WSI 2.5/SI,WSI 6
    WAP 2.5-10 BL
    • W-Series, End plate blue for WDU 2.5 BL TO WDU 10 BL, WTR 2.BL,WSI 6 BL
    WAP 16-35/WTW 2.5-10
    • W-Series, End plate for WDU 16 TO WDU35, WPE 16 TO WPE 35/ partition plate for WDU 2.5 TO WDU 10, WTR 2.5,WSI 6
    WAP 16-35/WTW 2.5-10 BL
    • W-Series, End plate blue for WDU 16 TO WDU35, WPE 16 TO WPE 35/ partition plate for WDU 2.5 TO WDU 10, WTR 2.5,WSI 6
    WAP WDK 2.5
    • W-Series, End plate for WDK 2.5, WDK 2.5 PE
    WAP WDK 2.5 BL
    • W-Series, End plate for WDK 2.5 BL
    WTW EN
    • W-Series, Seperation plate
    WAP WDK10
    • W-Series, End plate for WDK 10
    WAP WDK10 BL
    • W-Series, End plate for WDK 10 BL
     
    Details
  • Description WEW 35/2
    • W-Series, End bracket
    WEW 35/1
    • W-Series, End bracket
    EW 35
    • W-Series, End bracket
    Details
  • Description WEW 35/2
    • W-Series, End bracket
    WEW 35/1
    • W-Series, End bracket
    EW 35 W-Series, End bracket
    Details
  • Description Spring connection with PUSH IN Technology. The innovative PUSH IN technology reduces the amount of time you spend on wiring to a minimum. Direct insertion guarantees high conductor pull-out forces and simple handling for all conductor types. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    https://www.youtube.com/watch?v=fZzT0f558BU&index=5&list=PLvGrgti7U38jdWLGrSZePCSoeFXi4hzbr&t=0s  
    Details
  • Feed-through terminal blocks 1-tier ZDU 2.5 - Feed-through terminal, Tension clamp connection, 2.5 mm², 24 A, Dark Beige ZDU 2.5 BL - Feed-through terminal, Tension clamp connection, 2.5 mm², 800 V, 24 A, Blue ZDU 4 - Feed-through terminal, Tension clamp connection, 4 mm², 800 V, 32 A, Dark Beige ZDU 4 BL - Feed-through terminal, Tension clamp connection, 4 mm², 800 V, 32 A, Blue ZDU 6 - Feed-through terminal, Tension clamp connection, 6 mm², 800 V, 41 A, Dark Beige ZDU 6 BL - Feed-through terminal, Tension clamp connection, 6 mm², 800 V, 41 A,Blue ZDU 10 - Feed-through terminal, Tension clamp connection, 10 mm², 1000 V, 57 A, Dark Beige ZDU 10 BL - Feed-through terminal, Tension clamp connection, 10 mm², 1000 V, 57 A, Blue ZDU 16 - Feed-through terminal, Tension clamp connection, 16 mm², 1000 V, 76 A, Dark Beige ZDU 16 BL - Feed-through terminal, Tension clamp connection, 16 mm², 1000 V, 76 A, Blue Feed-through terminal blocks 2-Tier ZDK 2.5 - Feed-through terminal, Double-tier terminal, Tension clamp connection, 2.5 mm², 500 V, 20 A, Beige ZDK 2.5 BL - Feed-through terminal, Double-tier terminal, Tension clamp connection, 2.5 mm², 500 V, 20 A, Blue  
    Details
  • Description WDU 2.5
    • Feed-through terminal, Screw connection, 2.5 mm², 800 V, 24 A, Dark Beige
    WDU 2.5 BL
    • Feed-through terminal, Screw connection, 2.5 mm², 800 V, 24 A, Blue
    WDU 2.5/TC TYP K
    • W-Series, Feed-through terminal, Thermocouple TYPE K, Rated cross-section: 2.5 mm², Screw connection
    WDU 4
    • Feed-through terminal, Screw connection, 4 mm², 800 V, 32 A, Dark Beige
    WDU 4 BL
    • Feed-through terminal, Screw connection, 4 mm², 800 V, 32 A, Blue
    WDU 6
    • Feed-through terminal, Screw connection, 6 mm², 800 V, 41 A, Dark Beige
    WDU 6 BL
    • Feed-through terminal, Screw connection, 6 mm², 800 V, 41 A, Blue
    WDU 10
    • Feed-through terminal, Screw connection, 10 mm², 1000 V, 57 A, Dark Beige
    WDU 10 BL
    • Feed-through terminal, Screw connection, 10 mm², 1000 V, 57 A, Blue
    WDU 16
    • Feed-through terminal, Screw connection, 16 mm², 1000 V, 76 A, Dark Beige
    WDU 16 BL
    • Feed-through terminal, Screw connection, 16 mm², 1000 V, 76 A, Blue
    WDU 35
    • Feed-through terminal, Screw connection, 35 mm², 1000 V, 125 A, Dark Beige
    WDU 35 BL
    • Feed-through terminal, Screw connection, 35 mm², 1000 V, 125 A, Blue
    WDU 50N
    • Feed-through terminal, Screw connection, 50 mm², 1000 V, 150 A, Dark Beige
    WDU 50N BL
    • Feed-through terminal, Screw connection, 50 mm², 1000 V, 150 A, Blue
    WDU 70N/35
    • Feed-through terminal, Screw connection, 70 mm², 1000 V, 192 A, Dark Beige
    WDU 70N/35 BL
    • Feed-through terminal, Screw connection, 70 mm², 1000 V, 192 A, Blue
    WDU 95N/120N
    • Feed-through terminal, Screw connection, 120 mm², 1000 V, 269 A, Dark Beige
    WDU 95N/120N BL
    • Feed-through terminal, Screw connection, 120 mm², 1000 V, 269 A, Blue
    WDU 120/150
    • Feed-through terminal, Screw connection, 120 mm², 1000 V, 269 A, Dark Beige
    WDU 120/150 BL
    • Feed-through terminal, Screw connection, 120 mm², 1000 V, 269 A, Blue
    WDU 240
    • Feed-through terminal, Screw connection, 240 mm², 1000 V, 415 A, Dark Beige
    WDU 240 BL
    • Feed-through terminal, Screw connection, 240 mm², 1000 V, 415 A, Blue
           
    Details
  • Description WDK 2.5
    • Feed-through terminal, Double-tier terminal, Screw connection, 2.5 mm², 400 V, 24 A, Dark Beige
    WDK 2.5 BL
    • Feed-through terminal, Double-tier terminal, Screw connection, 2.5 mm², 400 V, 24 A, Blue
    WDK 10
    • Feed-through terminal, Double-tier terminal, Screw connection, 10 mm², 800 V, 57 A, Dark Beige
    WDK 10 BL
    • Feed-through terminal, Double-tier terminal, Screw connection, 10 mm², 800 V, 57 A, Blue
     
    Details
  • Description DLD 2.5 DB
    • W-Series, Initiator/actuator terminal, Rated cross-section: 2.5 mm², Screw connection
     
    Details
  • Field bus components The FBCon Fieldbus distributor is available in the industry and EEx (ia) version. They are used for coupling from 1 to 8 field devices or sensors. They are connected via spur lines. The connection to the spur line can be made with an M12 plug or directly via an EMC cable gland. Communication and device power feed are transferred by a common 2-wire line. The distributors offer the following features respective of the version: Tension-clamp connection system Overvoltage protection for the main line Current limiter for each branch line EMC cable gland M12 plug-in connectors External earthing contact Interruption-free bus operation Industrial version Bus termination integrated (not EX) ATEX explosion-proof version Pressure-equalising element Protection degrees IP65, IP66, IP67 Stainless steel versions PROFIBUS-PA compatible Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • Functional components The following products are available as functional components: Switch and button components in a sealed built-in EG2 enclosure Rectifier and fuse components in a sealed built-in EG2 enclosure Logic components with AND, NAND, OR and NOR operators Diode gates with up to 40 inputs in open design Components modules for the integration of electronic elements Serial interface converter, and AD / DA converter Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • AFS 2.5 CF 2C BK -Fuse terminal, PUSH IN, 2.5 mm², 250 V, 10 A, Black AFS 2.5 CF 2C 12V BK - Fuse terminal, PUSH IN, 2.5 mm², 12 V, 10 A, Black AFS 2.5 CF 2C 24V BK - Fuse terminal, PUSH IN, 2.5 mm², 24 V, 10 A, Black AFS 4 2C BK - Fuse terminal, PUSH IN, 4 mm², 250 V, 6.3 A, Black AFS 4 2C 10-36V BK - Fuse terminal, PUSH IN, 4 mm², 36 V, 6.3 A, Black AFS 4 2C 30-70V BK - Fuse terminal, PUSH IN, 4 mm², 70 V, 6.3 A, Black AFS 4 2C 100-250V BK - Fuse terminal, PUSH IN, 4 mm², 250 V, 6.3 A, Black    
    Details
  • DescriptionZSI ZSI 2.5
    • Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct  mounting
    ZSI 2.5/LD 28AC
    • Z-series, Fuse terminal with LED 28VAC, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct mounting
    ZSI 2.5/LD 120AC
    • Z-series, Fuse terminal with LED 120VAC, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct mounting
    ZSI 2.5/LD 250AC
    • Z-series, Fuse terminal with LED 250VAC, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct mounting
    Details
  • Description WTR 2.5/SI
    • W-Series, Fuse terminal, Rated cross-section: 2.5 mm², Screw connection
    WSI 4/2
    • W-Series, Fuse terminal, Rated cross-section: 4 mm², Screw connection
    WSI 4/2/LD 10-36V AC/DC
    • W-Series, Fuse terminal with LED 10-36 VDC/AC, Rated cross-section: 4 mm², Screw connection
    WSI 4/2/LD 140-250V AC/DC
    • W-Series, Fuse terminal with LED 140-250 VDC/AC, Rated cross-section: 4 mm², Screw connection
    WSI 6
    • W-Series, Fuse terminal, Rated cross-section: 6 mm², Screw connection, FUSE 5X20 mm
    WSI 6/LD 10-36V DC/AC
    • W-Series, Fuse terminal with LED 10-36 VDC/AC, Rated cross-section: 6 mm², Screw connection, FUSE 5X20 mm
    WSI 6/LD 250AC
    • W-Series, Fuse terminal with LED 250 AC, Rated cross-section: 6 mm², Screw connection, FUSE 5X20 mm
    Details
  • Identification systems Weidmüller offers a comprehensive range of products for marking devices, conductors and connectors. The marking systems import data from your existing CAE software for fast and permanent printing. The MultiCard concept from Weidmüller has now become established as a worldwide standard. High-quality, trendsetting marking systems are available for both Weidmüller products and competing products. These range from laser, thermal transfer and ink-jet printers for diverse applications up to plotters and ensure clear and permanent labelling. On request, Weidmüller also supplies ready-printed markers. An extensive range of materials, e.g. labels, shrink sleeves, cable ties, junction box terminals with the tried-and-tested tension clamp connections as well as lighting terminals for effective wiring is also available. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
       
    Details
  • Industrial Ethernet Weidmüller Industrial Ethernet components are the perfect link the data communication between Ethernet enabled devices in industrial automation. By supporting various topologies and protocols, they can be used in many industrial applications. As a complete provider of industrial network infrastructure for machine and equipment manufacture, we offer a wide range of switch products to suit the individual needs of our customers. In particular, Gigabit Switches (unmanaged and managed) and media converters, Power-over-Ethernet switches, WLAN modules and serial/Ethernet converters to meet the highest requirements and provide a reliable and flexible Ethernet communication. An extensive passive product portfolio consisting of RJ 45 and fibre optic connectors and cables make Weidmüller your partner for industrial Ethernet solutions.  
    Details
  • Interfaces The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • The IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. The analyzer is capable of measuring up to eight wavelengths in a gas or liquid phase sample. Sample handling and conditioning systems are available as an option that is integrated into the IPS-4s sample cell enclosure. Features
    • Measures up to 8 wavelengths
    • Low cost of ownership
    • No annual, routine maintenance
    • No moving parts
    • IP65 (NEMA 4X optional)
    • Integrated, customizable sample system
    • Ethernet and MODBUS communications
    Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Power
    Details
  • Junction Box The Klippon® brand has long stood for competence and quality in housings, particularly when customer solutions for standard industrial applications and applications in explosive risk zones are concerned. Weidmüller meets these requirements with its range of steel sheet enclosures in the new Klippon® TB series, available in Multi-Hinge (MH) and Quarter-Lock (QL) versions, the Klippon® STB series and the aluminium enclosures of the Klippon® K series. The portfolio is rounded off with the polyester enclosures of the Klippon® POK series and the polycarbonate enclosures. Irrespective of which application users are planning, Weidmüller offers numerous precisely fitting housing solutions and individual services: turnkey enclosures with customer-specific configurations such as terminal rails, drilled holes, cable glands, cutouts, special coatings and much more besides. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • Lightning and surge protection (SPD) The priority you give to overvoltage protection depends on your willingness to take risks! Perhaps you think "it’ll never happen to me". Then you won’t have lost anything, but will have gained only very little. However, the subject of overvoltage is then a daily worry for you. But if you wish to be on the safe side, you should include overvoltage protection in your corporate strategy. You will profit from such an investment in operational safety and can prevent a disaster with Weidmüller's surge protection for power, signal and data. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • A2C 2.5 PE - PE terminal, PUSH IN, 2.5 mm², green / yellow A2C 4 PE - PE terminal, PUSH IN, 4 mm², green / yellow A2C 6 PE - PE terminal, PUSH IN, 6 mm², green / yellow A2C 10 PE - PE terminal, PUSH IN, 10 mm², 1000 V, green / yellow A2C 16 PE - PE terminal, PUSH IN, 16 mm², 1000 V, green / yellow
    Details
  • Modular PE terminal blocks 1 tier ZPE 2.5 - PE terminal, Tension clamp connection, 2.5 mm², 300 A (2.5 mm²), green / yellow ZPE 4 - PE terminal, Tension clamp connection, 4 mm², 480 A (4 mm²), green / yellow ZPE 6 - PE terminal, Tension clamp connection, 6 mm², 720 A (6 mm²), green / yellow ZPE 10 - PE terminal, Tension clamp connection, 10 mm², 1200 A (10 mm²), green / yellow ZPE 16 - PE terminal, Tension clamp connection, 16 mm², 1920 A (16 mm²), green / yellow ZPE 35 - PE terminal, Tension clamp connection, 35 mm², 4200 A (35 mm²), green / yellow Modular PE terminal blocks 2 tier ZDK 2.5 - Double-tier terminal, PE terminal, Tension clamp connection, 2.5 mm², 300 A (2.5 mm²), green / yellow  
    Details
  • Description ZDU 2.5/2X2AN/D+
    • Z-series, Component terminal with diode, Feed-through terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Beige
    ZDU 2.5/2X2AN/D-
    • Z-series, Component terminal with diode, Feed-through terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Beige
    Details
  • Description ADT 2.5 2C - Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A, Dark Beige ADT 2.5 2C BL - Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A,Blue ADT 4 2C - Test-disconnect terminal, PUSH IN, 4 mm², 500 V, 20 A, Dark Beige ADT 4 2C BL - Test-disconnect terminal, PUSH IN, 4 mm², 500 V, 20 A,Blue
    Details
  • Description TS 35X7.5/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanized, chromium-plated
    TS 35X15/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 15, with slot, Steel, galvanized, chromium-plated
    TS 35X7.5 2M/CRN
    • Mounting rail, TS 35, TS 35 x 7.5, without slot, Stainless steel, untreated
     
    Details
  • Description TS 35X7.5/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanized, chromium-plated
     TS 35X15/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 15, with slot, Steel, galvanized, chromium-platedTS
    35X7.5 2M/CRN
    • Mounting rail, TS 35, TS 35 x 7.5, without slot, Stainless steel, untreated
    Details
  • Description DDM-TMA1 (its nick name is Tamaichi) is designed to measure the dust concentration in wet flue gases. The measuring principle of DDM-TMA1 is Non-sampling Light Scattering method. The wet flue gas passes inside of the high performance heater which vanishes the mist in the wet flue gases, and the light scattering dust detector measures just the dust concentration in the wer flue gases. The air curtain prevents the wet flue gas flow around the detection area from interfering with the detection area. DDM-TMA1 can monitor dust concentration even in heavy wet flue gases. Industrials
    • Oil & Gas
    • Chemical & Petrochemical
    • Power
    • Steel
    • Pulp & Paper
    Details
  • Description WPE 2.5
    • PE terminal, Screw connection, 2.5 mm², 300 A (2.5 mm²), green / yellow
    WPE 4
    • PE terminal, Screw connection, 4 mm², 480 A (4 mm²), green / yellow
    WPE 6
    • PE terminal, Screw connection, 6 mm², 720 A (6 mm²), green / yellow
    WPE 10
    • PE terminal, Screw connection, 10 mm², 1200 A (10 mm²), green / yellow
    WPE 16
    • PE terminal, Screw connection, 16 mm², 1920 A (16 mm²), green / yellow
    WPE 35
    • PE terminal, Screw connection, 35 mm², 4200 A (35 mm²), green / yellow
    WPE 50N
    • PE terminal, Screw connection, 50 mm², 6000 A (50 mm²), green / yellow
    WPE 70/95
    • PE terminal, Screw connection, 95 mm², 11400 A (95 mm²), green / yellow
    WPE 95N/120N
    • PE terminal, Screw connection, 95 mm², 11400 A (95 mm²), green / yellow
    WPE 120/150
    • PE terminal, Screw connection, 120 mm², 14400 A (120 mm²), green / yellow
     
    Details
  • When working with live voltages, you must follow special guidelines and use special tools - tools which have been specially produced and tested for this purpose. Weidmüller offers a complete line of pliers which comply with national and international testing standards. All pliers are produced and tested according to DIN EN 60900. The pliers are ergonomically designed to fit to the hand form, and thus feature an improved hand position. The fingers are not pressed together - this results in less fatigue during operation. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
     
    Details
  • Description ZQV 2.5N/10 GE
    • W-Series, Cross-connector, For the terminals WDU 2.5, WTR 2.5 No. of poles: 10
    ZQV 4N/10 GE
    • W-Series, Cross-connector, For the terminals WDU 4, WTR 4, No. of poles: 10
    WQB 240/2
    • W-Series, Cross-connector, For the terminals WDU 240, No. of poles: 2
    Details
  • Polycarbonate The polycarbonate enclosures of the MPC series are ideal for building into electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. The polycarbonate enclosures of the MPC series are ideal for building into electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. The polycarbonate enclosures of the MPC series are ideal for building into electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. The polycarbonate enclosures of the MPC series are ideal for building into electrical, electro-mechanical and pneumatic devices as well as PCBs. The enclosures are used in situations with extreme mechanical and chemical conditions. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details

Title

Go to Top