Pisanu Engineering: 02-2482896-8 |pisales@pisanu.co.th, ECsales@pisanu.ac.th
LineLineFacebookFacebook

Oil & Gas

Home/Oil & Gas
  •

    End Plate

    Description WAP 2.5-10
    • W-Series, End plate for WDU 2.5 TO WDU 10, WTR 2.5,WSI 2.5/SI,WSI 6
    WAP 2.5-10 BL
    • W-Series, End plate blue for WDU 2.5 BL TO WDU 10 BL, WTR 2.BL,WSI 6 BL
    WAP 16-35/WTW 2.5-10
    • W-Series, End plate for WDU 16 TO WDU35, WPE 16 TO WPE 35/ partition plate for WDU 2.5 TO WDU 10, WTR 2.5,WSI 6
    WAP 16-35/WTW 2.5-10 BL
    • W-Series, End plate blue for WDU 16 TO WDU35, WPE 16 TO WPE 35/ partition plate for WDU 2.5 TO WDU 10, WTR 2.5,WSI 6
    WAP WDK 2.5
    • W-Series, End plate for WDK 2.5, WDK 2.5 PE
    WAP WDK 2.5 BL
    • W-Series, End plate for WDK 2.5 BL
    WTW EN
    • W-Series, Seperation plate
    WAP WDK10
    • W-Series, End plate for WDK 10
    WAP WDK10 BL
    • W-Series, End plate for WDK 10 BL
     
    Request for quotation
    Details

  • End Stopper

    Description WEW 35/2
    • W-Series, End bracket
    WEW 35/1
    • W-Series, End bracket
    EW 35
    • W-Series, End bracket
    Request for quotation
    Details

  • End Stopper

    Description WEW 35/2
    • W-Series, End bracket
    WEW 35/1
    • W-Series, End bracket
    EW 35 W-Series, End bracket
    Request for quotation
    Details

  • Feed Through Terminal

    Description Spring connection with PUSH IN Technology. The innovative PUSH IN technology reduces the amount of time you spend on wiring to a minimum. Direct insertion guarantees high conductor pull-out forces and simple handling for all conductor types. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    https://www.youtube.com/watch?v=fZzT0f558BU&index=5&list=PLvGrgti7U38jdWLGrSZePCSoeFXi4hzbr&t=0s  
    Request for quotation
    Details

  • Feed-through terminal blocks

    Feed-through terminal blocks 1-tier ZDU 2.5 - Feed-through terminal, Tension clamp connection, 2.5 mm², 24 A, Dark Beige ZDU 2.5 BL - Feed-through terminal, Tension clamp connection, 2.5 mm², 800 V, 24 A, Blue ZDU 4 - Feed-through terminal, Tension clamp connection, 4 mm², 800 V, 32 A, Dark Beige ZDU 4 BL - Feed-through terminal, Tension clamp connection, 4 mm², 800 V, 32 A, Blue ZDU 6 - Feed-through terminal, Tension clamp connection, 6 mm², 800 V, 41 A, Dark Beige ZDU 6 BL - Feed-through terminal, Tension clamp connection, 6 mm², 800 V, 41 A,Blue ZDU 10 - Feed-through terminal, Tension clamp connection, 10 mm², 1000 V, 57 A, Dark Beige ZDU 10 BL - Feed-through terminal, Tension clamp connection, 10 mm², 1000 V, 57 A, Blue ZDU 16 - Feed-through terminal, Tension clamp connection, 16 mm², 1000 V, 76 A, Dark Beige ZDU 16 BL - Feed-through terminal, Tension clamp connection, 16 mm², 1000 V, 76 A, Blue Feed-through terminal blocks 2-Tier ZDK 2.5 - Feed-through terminal, Double-tier terminal, Tension clamp connection, 2.5 mm², 500 V, 20 A, Beige ZDK 2.5 BL - Feed-through terminal, Double-tier terminal, Tension clamp connection, 2.5 mm², 500 V, 20 A, Blue  
    Request for quotation
    Details

  • Feed-through terminal blocks 1 tier

    Description WDU 2.5
    • Feed-through terminal, Screw connection, 2.5 mm², 800 V, 24 A, Dark Beige
    WDU 2.5 BL
    • Feed-through terminal, Screw connection, 2.5 mm², 800 V, 24 A, Blue
    WDU 2.5/TC TYP K
    • W-Series, Feed-through terminal, Thermocouple TYPE K, Rated cross-section: 2.5 mm², Screw connection
    WDU 4
    • Feed-through terminal, Screw connection, 4 mm², 800 V, 32 A, Dark Beige
    WDU 4 BL
    • Feed-through terminal, Screw connection, 4 mm², 800 V, 32 A, Blue
    WDU 6
    • Feed-through terminal, Screw connection, 6 mm², 800 V, 41 A, Dark Beige
    WDU 6 BL
    • Feed-through terminal, Screw connection, 6 mm², 800 V, 41 A, Blue
    WDU 10
    • Feed-through terminal, Screw connection, 10 mm², 1000 V, 57 A, Dark Beige
    WDU 10 BL
    • Feed-through terminal, Screw connection, 10 mm², 1000 V, 57 A, Blue
    WDU 16
    • Feed-through terminal, Screw connection, 16 mm², 1000 V, 76 A, Dark Beige
    WDU 16 BL
    • Feed-through terminal, Screw connection, 16 mm², 1000 V, 76 A, Blue
    WDU 35
    • Feed-through terminal, Screw connection, 35 mm², 1000 V, 125 A, Dark Beige
    WDU 35 BL
    • Feed-through terminal, Screw connection, 35 mm², 1000 V, 125 A, Blue
    WDU 50N
    • Feed-through terminal, Screw connection, 50 mm², 1000 V, 150 A, Dark Beige
    WDU 50N BL
    • Feed-through terminal, Screw connection, 50 mm², 1000 V, 150 A, Blue
    WDU 70N/35
    • Feed-through terminal, Screw connection, 70 mm², 1000 V, 192 A, Dark Beige
    WDU 70N/35 BL
    • Feed-through terminal, Screw connection, 70 mm², 1000 V, 192 A, Blue
    WDU 95N/120N
    • Feed-through terminal, Screw connection, 120 mm², 1000 V, 269 A, Dark Beige
    WDU 95N/120N BL
    • Feed-through terminal, Screw connection, 120 mm², 1000 V, 269 A, Blue
    WDU 120/150
    • Feed-through terminal, Screw connection, 120 mm², 1000 V, 269 A, Dark Beige
    WDU 120/150 BL
    • Feed-through terminal, Screw connection, 120 mm², 1000 V, 269 A, Blue
    WDU 240
    • Feed-through terminal, Screw connection, 240 mm², 1000 V, 415 A, Dark Beige
    WDU 240 BL
    • Feed-through terminal, Screw connection, 240 mm², 1000 V, 415 A, Blue
           
    Request for quotation
    Details

  • Feed-through terminal blocks 2 tier

    Description WDK 2.5
    • Feed-through terminal, Double-tier terminal, Screw connection, 2.5 mm², 400 V, 24 A, Dark Beige
    WDK 2.5 BL
    • Feed-through terminal, Double-tier terminal, Screw connection, 2.5 mm², 400 V, 24 A, Blue
    WDK 10
    • Feed-through terminal, Double-tier terminal, Screw connection, 10 mm², 800 V, 57 A, Dark Beige
    WDK 10 BL
    • Feed-through terminal, Double-tier terminal, Screw connection, 10 mm², 800 V, 57 A, Blue
     
    Request for quotation
    Details

  • Feed-through terminal blocks 3 tier

    Description DLD 2.5 DB
    • W-Series, Initiator/actuator terminal, Rated cross-section: 2.5 mm², Screw connection
     
    Request for quotation
    Details

  • Field bus components

    Field bus components The FBCon Fieldbus distributor is available in the industry and EEx (ia) version. They are used for coupling from 1 to 8 field devices or sensors. They are connected via spur lines. The connection to the spur line can be made with an M12 plug or directly via an EMC cable gland. Communication and device power feed are transferred by a common 2-wire line. The distributors offer the following features respective of the version: Tension-clamp connection system Overvoltage protection for the main line Current limiter for each branch line EMC cable gland M12 plug-in connectors External earthing contact Interruption-free bus operation Industrial version Bus termination integrated (not EX) ATEX explosion-proof version Pressure-equalising element Protection degrees IP65, IP66, IP67 Stainless steel versions PROFIBUS-PA compatible Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Request for quotation
    Details

  • Functional components

    Functional components The following products are available as functional components: Switch and button components in a sealed built-in EG2 enclosure Rectifier and fuse components in a sealed built-in EG2 enclosure Logic components with AND, NAND, OR and NOR operators Diode gates with up to 40 inputs in open design Components modules for the integration of electronic elements Serial interface converter, and AD / DA converter Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Request for quotation
    Details

  • Fuse terminal blocks

    AFS 2.5 CF 2C BK -Fuse terminal, PUSH IN, 2.5 mm², 250 V, 10 A, Black AFS 2.5 CF 2C 12V BK - Fuse terminal, PUSH IN, 2.5 mm², 12 V, 10 A, Black AFS 2.5 CF 2C 24V BK - Fuse terminal, PUSH IN, 2.5 mm², 24 V, 10 A, Black AFS 4 2C BK - Fuse terminal, PUSH IN, 4 mm², 250 V, 6.3 A, Black AFS 4 2C 10-36V BK - Fuse terminal, PUSH IN, 4 mm², 36 V, 6.3 A, Black AFS 4 2C 30-70V BK - Fuse terminal, PUSH IN, 4 mm², 70 V, 6.3 A, Black AFS 4 2C 100-250V BK - Fuse terminal, PUSH IN, 4 mm², 250 V, 6.3 A, Black    
    Request for quotation
    Details

  • Fuse terminal blocks

    DescriptionZSI ZSI 2.5
    • Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct  mounting
    ZSI 2.5/LD 28AC
    • Z-series, Fuse terminal with LED 28VAC, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct mounting
    ZSI 2.5/LD 120AC
    • Z-series, Fuse terminal with LED 120VAC, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct mounting
    ZSI 2.5/LD 250AC
    • Z-series, Fuse terminal with LED 250VAC, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct mounting
    Request for quotation
    Details

  • Fuse terminal blocks 1-tier

    Description WTR 2.5/SI
    • W-Series, Fuse terminal, Rated cross-section: 2.5 mm², Screw connection
    WSI 4/2
    • W-Series, Fuse terminal, Rated cross-section: 4 mm², Screw connection
    WSI 4/2/LD 10-36V AC/DC
    • W-Series, Fuse terminal with LED 10-36 VDC/AC, Rated cross-section: 4 mm², Screw connection
    WSI 4/2/LD 140-250V AC/DC
    • W-Series, Fuse terminal with LED 140-250 VDC/AC, Rated cross-section: 4 mm², Screw connection
    WSI 6
    • W-Series, Fuse terminal, Rated cross-section: 6 mm², Screw connection, FUSE 5X20 mm
    WSI 6/LD 10-36V DC/AC
    • W-Series, Fuse terminal with LED 10-36 VDC/AC, Rated cross-section: 6 mm², Screw connection, FUSE 5X20 mm
    WSI 6/LD 250AC
    • W-Series, Fuse terminal with LED 250 AC, Rated cross-section: 6 mm², Screw connection, FUSE 5X20 mm
    Request for quotation
    Details

  • Identification systems

    Identification systems Weidmüller offers a comprehensive range of products for marking devices, conductors and connectors. The marking systems import data from your existing CAE software for fast and permanent printing. The MultiCard concept from Weidmüller has now become established as a worldwide standard. High-quality, trendsetting marking systems are available for both Weidmüller products and competing products. These range from laser, thermal transfer and ink-jet printers for diverse applications up to plotters and ensure clear and permanent labelling. On request, Weidmüller also supplies ready-printed markers. An extensive range of materials, e.g. labels, shrink sleeves, cable ties, junction box terminals with the tried-and-tested tension clamp connections as well as lighting terminals for effective wiring is also available. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
       
    Request for quotation
    Details

  • Industrial Ethernet

    Industrial Ethernet Weidmüller Industrial Ethernet components are the perfect link the data communication between Ethernet enabled devices in industrial automation. By supporting various topologies and protocols, they can be used in many industrial applications. As a complete provider of industrial network infrastructure for machine and equipment manufacture, we offer a wide range of switch products to suit the individual needs of our customers. In particular, Gigabit Switches (unmanaged and managed) and media converters, Power-over-Ethernet switches, WLAN modules and serial/Ethernet converters to meet the highest requirements and provide a reliable and flexible Ethernet communication. An extensive passive product portfolio consisting of RJ 45 and fibre optic connectors and cables make Weidmüller your partner for industrial Ethernet solutions.  
    Request for quotation
    Details

  • Interfaces

    Interfaces The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Request for quotation
    Details

  • IPS-4 Integrated Photometric

    The IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. The analyzer is capable of measuring up to eight wavelengths in a gas or liquid phase sample. Sample handling and conditioning systems are available as an option that is integrated into the IPS-4s sample cell enclosure. Features
    • Measures up to 8 wavelengths
    • Low cost of ownership
    • No annual, routine maintenance
    • No moving parts
    • IP65 (NEMA 4X optional)
    • Integrated, customizable sample system
    • Ethernet and MODBUS communications
    Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Power
    Request for quotation
    Details

  • JUNCTION BOX

    Junction Box The Klippon® brand has long stood for competence and quality in housings, particularly when customer solutions for standard industrial applications and applications in explosive risk zones are concerned. Weidmüller meets these requirements with its range of steel sheet enclosures in the new Klippon® TB series, available in Multi-Hinge (MH) and Quarter-Lock (QL) versions, the Klippon® STB series and the aluminium enclosures of the Klippon® K series. The portfolio is rounded off with the polyester enclosures of the Klippon® POK series and the polycarbonate enclosures. Irrespective of which application users are planning, Weidmüller offers numerous precisely fitting housing solutions and individual services: turnkey enclosures with customer-specific configurations such as terminal rails, drilled holes, cable glands, cutouts, special coatings and much more besides. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Request for quotation
    Details

  • Level Transmitters (FKE-5)

    Description The FCX-AIII level transmitter accurately measures liquid level and transmits a proportional 4 to 20 mA signal. The transmitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality. Industrial
    • Oil & Gas
    • Pulp & Paper
    Request for quotation
    Details

  • Level Transmitters (FQK)

    Description This water level transmitter is used for measuring the level of clean water, sewage water, well, river, etc. The detector is placed on the bottom of the water, and the water head pressure acting on the pressure receiving diaphragm is detected, converted into a current signal and then transmitted to a receiving instrument via the connector terminal. Industrial
    • Oil & Gas
    • Pulp & Paper
     
    Request for quotation
    Details

  • Lightning and surge protection (SPD)

    Lightning and surge protection (SPD) The priority you give to overvoltage protection depends on your willingness to take risks! Perhaps you think "it’ll never happen to me". Then you won’t have lost anything, but will have gained only very little. However, the subject of overvoltage is then a daily worry for you. But if you wish to be on the safe side, you should include overvoltage protection in your corporate strategy. You will profit from such an investment in operational safety and can prevent a disaster with Weidmüller's surge protection for power, signal and data. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Request for quotation
    Details

  • Modular PE terminal blocks

    A2C 2.5 PE - PE terminal, PUSH IN, 2.5 mm², green / yellow A2C 4 PE - PE terminal, PUSH IN, 4 mm², green / yellow A2C 6 PE - PE terminal, PUSH IN, 6 mm², green / yellow A2C 10 PE - PE terminal, PUSH IN, 10 mm², 1000 V, green / yellow A2C 16 PE - PE terminal, PUSH IN, 16 mm², 1000 V, green / yellow
    Request for quotation
    Details

  • Modular PE terminal blocks

    Modular PE terminal blocks 1 tier ZPE 2.5 - PE terminal, Tension clamp connection, 2.5 mm², 300 A (2.5 mm²), green / yellow ZPE 4 - PE terminal, Tension clamp connection, 4 mm², 480 A (4 mm²), green / yellow ZPE 6 - PE terminal, Tension clamp connection, 6 mm², 720 A (6 mm²), green / yellow ZPE 10 - PE terminal, Tension clamp connection, 10 mm², 1200 A (10 mm²), green / yellow ZPE 16 - PE terminal, Tension clamp connection, 16 mm², 1920 A (16 mm²), green / yellow ZPE 35 - PE terminal, Tension clamp connection, 35 mm², 4200 A (35 mm²), green / yellow Modular PE terminal blocks 2 tier ZDK 2.5 - Double-tier terminal, PE terminal, Tension clamp connection, 2.5 mm², 300 A (2.5 mm²), green / yellow  
    Request for quotation
    Details

  • Modular terminal blocks with electronic components

    Description ZDU 2.5/2X2AN/D+
    • Z-series, Component terminal with diode, Feed-through terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Beige
    ZDU 2.5/2X2AN/D-
    • Z-series, Component terminal with diode, Feed-through terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Beige
    Request for quotation
    Details

  • Modular test-disconnect terminal blocks

    Description ADT 2.5 2C - Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A, Dark Beige ADT 2.5 2C BL - Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A,Blue ADT 4 2C - Test-disconnect terminal, PUSH IN, 4 mm², 500 V, 20 A, Dark Beige ADT 4 2C BL - Test-disconnect terminal, PUSH IN, 4 mm², 500 V, 20 A,Blue
    Request for quotation
    Details

  • Mounting Rail

    Description TS 35X7.5/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanized, chromium-plated
    TS 35X15/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 15, with slot, Steel, galvanized, chromium-plated
    TS 35X7.5 2M/CRN
    • Mounting rail, TS 35, TS 35 x 7.5, without slot, Stainless steel, untreated
     
    Request for quotation
    Details

  • Mounting Rail

    Description TS 35X7.5/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanized, chromium-plated
     TS 35X15/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 15, with slot, Steel, galvanized, chromium-platedTS
    35X7.5 2M/CRN
    • Mounting rail, TS 35, TS 35 x 7.5, without slot, Stainless steel, untreated
    Request for quotation
    Details

  • Non sampling light scattering method Dust Density Monitoring System for Wet Fuel Gasses

    Description DDM-TMA1 (its nick name is Tamaichi) is designed to measure the dust concentration in wet flue gases. The measuring principle of DDM-TMA1 is Non-sampling Light Scattering method. The wet flue gas passes inside of the high performance heater which vanishes the mist in the wet flue gases, and the light scattering dust detector measures just the dust concentration in the wer flue gases. The air curtain prevents the wet flue gas flow around the detection area from interfering with the detection area. DDM-TMA1 can monitor dust concentration even in heavy wet flue gases. Industrials
    • Oil & Gas
    • Chemical & Petrochemical
    • Power
    • Steel
    • Pulp & Paper
    Request for quotation
    Details

  • PE terminal blocks 1-tier

    Description WPE 2.5
    • PE terminal, Screw connection, 2.5 mm², 300 A (2.5 mm²), green / yellow
    WPE 4
    • PE terminal, Screw connection, 4 mm², 480 A (4 mm²), green / yellow
    WPE 6
    • PE terminal, Screw connection, 6 mm², 720 A (6 mm²), green / yellow
    WPE 10
    • PE terminal, Screw connection, 10 mm², 1200 A (10 mm²), green / yellow
    WPE 16
    • PE terminal, Screw connection, 16 mm², 1920 A (16 mm²), green / yellow
    WPE 35
    • PE terminal, Screw connection, 35 mm², 4200 A (35 mm²), green / yellow
    WPE 50N
    • PE terminal, Screw connection, 50 mm², 6000 A (50 mm²), green / yellow
    WPE 70/95
    • PE terminal, Screw connection, 95 mm², 11400 A (95 mm²), green / yellow
    WPE 95N/120N
    • PE terminal, Screw connection, 95 mm², 11400 A (95 mm²), green / yellow
    WPE 120/150
    • PE terminal, Screw connection, 120 mm², 14400 A (120 mm²), green / yellow
     
    Request for quotation
    Details

  • Pliers

    When working with live voltages, you must follow special guidelines and use special tools - tools which have been specially produced and tested for this purpose. Weidmüller offers a complete line of pliers which comply with national and international testing standards. All pliers are produced and tested according to DIN EN 60900. The pliers are ergonomically designed to fit to the hand form, and thus feature an improved hand position. The fingers are not pressed together - this results in less fatigue during operation. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
     
    Request for quotation
    Details

Title

Copyright 2019 Pisanu | All Rights Reserved |
LineLineFacebookFacebook
Go to Top