-
Specifications Wiring Duct Wide Slot, Light Grey, 2 Meter SIZE 25 x 25 - 150 x 100 mm. Related Market Electrical Industrial Components -
Specifications Wiring Duct Solid Wall, Light Grey, 2 Meter SIZE 25 x 25 - 150 x 100 mm. Related Market Electrical Industrial Components -
Specifications Wiring Duct Narrow Slot, Light Grey, 2 Meter SIZE 25 x 25 - 150 x 100 mm. Related Market Electrical Industrial Components -
Wire end ferrules The use of wire end ferrules ensures that users get electrical connections of long-lasting, consistent quality.In addition, they bring advantages during installation. The wide range of products comprises wire end ferrules with and without plastic collar, plus all the colours customers require. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
WIL without magnet, with M12 The WIL-STANDARD: 24V DC LED lamp, only 8mm high, with very high light output (1315 lm) and long service life (greater than 10,000 h). Extremely robust construction, solid encapsulation and metal housing - waterproof (IP67). Its 6500K colour temperature (daylight) makes it suitable for a wide range of applications. Very easy to connect thanks to M12 connector. Low current consumption means that a 24V, 0.5A DC power supply is sufficient for operation. Industrial Machinery, device manufacturer -
WIL without magnet without M12 The WIL-STANDARD: 24V DC LED lamp, only 8mm high, with very high light output (1315 lm) and long service life (greater than 10,000 h). Extremely robust construction, solid encapsulation and metal housing - waterproof (IP67). Its 6500K colour temperature (daylight) makes it suitable for a wide range of applications. Very easy to connect thanks to M12 connector. Low current consumption means that a 24V, 0.5A DC power supply is sufficient for operation. Industrial Machinery, device manufacturer -
WIL with plug for car cigarette lighter WIL with 12 V car plug: An 8 mm high LED lamp for 12 V DC, with very high light output (1315 lm) and long service life (greater than 10,000 h). Extremely robust construction, solid encapsulation and metal housing - waterproof (IP67). Its 6500K colour temperature (daylight) makes it suitable for a wide range of applications. The 12 V car plug makes it very easy to connect. Industrial Machinery, device manufacturer -
WIL length variants with M12 The WIL-STANDARD: 24V DC LED lamp, only 8mm high, with very high light output (1315 lm) and long service life (greater than 10,000 h). Extremely robust construction, solid encapsulation and metal housing - waterproof (IP67). Its 6500K colour temperature (daylight) makes it suitable for a wide range of applications. Very easy to connect thanks to M12 connector. Low current consumption means that a 24V, 0.5A DC power supply is sufficient for operation. Industrial Machinery, device manufacturer -
WIL length variant without M12 The WIL-STANDARD: 24V DC LED lamp, only 8mm high, with very high light output (1315 lm) and long service life (greater than 10,000 h). Extremely robust construction, solid encapsulation and metal housing - waterproof (IP67). Its 6500K colour temperature (daylight) makes it suitable for a wide range of applications. Very easy to connect thanks to M12 connector. Low current consumption means that a 24V, 0.5A DC power supply is sufficient for operation. Industrial Machinery, device manufacturer -
WIL accessories The WIL-STANDARD: 24V DC LED lamp, only 8mm high, with very high light output (1315 lm) and long service life (greater than 10,000 h). Extremely robust construction, solid encapsulation and metal housing - waterproof (IP67). Its 6500K colour temperature (daylight) makes it suitable for a wide range of applications. Very easy to connect thanks to M12 connector. Low current consumption means that a 24V, 0.5A DC power supply is sufficient for operation. Industrial Machinery, device manufacturer -
Description Product range covers standing and flat designs, as well as versions with the latching hook at the top and bottom. • THT, THR or SMD soldering processes • Wide range of different design types, also with integrated LEDs and shield contact tabs • Packed either in a tray (TY) or on a roll (tape-on-reel, RL) • Extended temperature range of–40 °C to +85 °C • Reinforced gold layer for improved corrosion protection • Transmission rates of up to 1 Gbit/s -
USB plug-in connectors Universal serial bus 2.0 and 3.0 (SuperSpeed); Type A connectors meet the requirements for high resistance and provide reliable connectivity. • Up to 5000 plugging cycles • THT, THR or SMD soldering processes • Available in design types 180° (vertical/upright) or 90° (horizontal/flat-lying) • Packed either in a tray (TY) or on a roll (tape-on-reel, RL) • Reinforced gold layer for improved corrosion protection -
Unmanaged switches Weidmüller's BasicLine consists of unmanaged Plug & Play switches in a robust IP 30 protected aluminium housing. The equipment can be delivered with Fast Ethernet and Gigabit Ethernet ports and offers an economical solution for industrial Ethernet networks. One variety is fitted with Fast Ethernet and Power-over-Ethernet ports. All the equipment has been developed for use in harsh industrial environments and has international approvals such as CE, cULus, Class I Div. 2 / ATEX and DNV / GL, and is therefore able to be used in many international applications. Plug & Play switches in a rugged aluminium housing (IP 30) Compact design Switches for an economical entry solution Fast Ethernet versions with 5 and 8 ports Models with copper or fibre-optic interface (multimode and singlemode) Full Gigabit Plug and Play switch with 5 ports Power-over-Ethernet (PoE) switch with 6 Fast Ethernet ports, 4 of them PoE+ ports Approvals: CE, FCC, cULus, Class I Div. 2 / ATEX, DNV / GL Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Application Providing outstanding protection against corrosion and the elements, the clean lines and molded, embossed design of Ultrx fiberglass enclosures make them the most stylish and aesthetically pleasing of their class. Size 19.53 x 15.59 x 8.66 - 29.84 x 23.43 x 16.57 -
Description This flowmeter is a clamp-on type ultrasonic flow meter based ontransit-time measuring method. Making full use of the latest electronics and digital signal processing technologies, we realized a compact and lightweight design, and improved the accuracy and easiness to use while keeping with anti-bubble performance. The communication function (MODBUS : Option) is also applicable. Industrials- Oil & Gas
- Pulp & Paper
-
Description Portable type ultrasonic flowmeter consists of a compact and lightweight flow transmitter and a clamp-on detector. With the latest electronics and the digital signal processing technology, it delivers precise measurement while allowing easy operation. New feature : renewed panel design, improved display visibility and connector reliability, and more accessories. Industrials- Oil & Gas
- Pulp & Paper
-
Description This flowmeter is a clamp-on type ultrasonic flow meter based ontransit-time measuring method. Making full use of the latest electronics and digital signal processing technologies, we realized the equipment with improved anti-bubble performance and high accuracy. The communication function (MODBUS : Option) is also applicable. Industrials- Oil & Gas
- Pulp & Paper
-
Application This two-door enclosure provides industry-leading protection for systems incorporating large components or complex mounting configurations in highly corrosive environments. It is typically used in food processing plants, pharmaceutical manufacturing facilities, petrochemical plants, pulp and paper processing and water treatment facilities. Size 56.00 x 44.00 - 68.00 x 68.00 -
Application The Type 4 rating and polyester powder coating make these enclosures ideal for outdoor environments or food processing applications where it is necessary to protect controls and instrumentation from wet, non-corrosive environments. Featuring a continuous hinge with clamps, the enclosures are supported by floor stands that provide additional height and access for cleaning under the enclosure. Equipment can be mounted on either panels or racks. Size 62.06 x 48.06 x 10.06 - 74.06 x 72.06 x 24.06 -
Application The Type 4 rating and polyester powder coating make these enclosures ideal for outdoor environments or food processing applications where it is necessary to protect controls and instrumentation from wet, non-corrosive environments. Featuring a continuous hinge with clamps, the enclosures are supported by floor stands that provide additional height and access for cleaning under the enclosure. Equipment can be mounted on either panels or racks. Size 62.06 x 48.06 x 10.06 - 74.06 x 72.06 x 24.06 -
Application Enclosures have gasketed, overlapping doors to keep the elements at bay and floor stands that provide additional height and access for cleaning under the enclosure. Because there is no centerpost, it is simple to install and remove panels. Size 50.00 x 38.00 - 68.00 x 68.00 -
Application An economical way to house electronics in corrosive environments, two-door enclosures provide easy access to equipment, larger capacity for control systems and steel reinforcements that ensure stability and strength. These enclosures feature captivated door screws and an optional PowerGlide Handle for secure latching. Size 56.00 x 22.00 - 56.00 x 22.00 -
Features BD Two Pole Distribution Block- Minimum space for maximum power
- Protection cover and insulating screens are transparent
- Insulating screen between each row
- Easy and safe connections
- Easily clips onto DIN rail or mounts to panel with screws
- Halogen free
- RoHS compliant
-
Tubular heating elements perform exceptional heat transfer by conduction, convection or radiation to heat liquids, air, gases and surfaces. In most heater assemblies, tubular element design configurations vary — round, triangular, flat press and formed. Bends are made to customer requirements Custom built from 0.200" to 0.625" diameters, a multitude of sheath materials with sheath temperature capabilities up to 1600°F, watt densities to fit many applications and up to 690 volts. Available with over 20 optional terminations and many stocked accessories. -
Gas filled thermometer Series: TSSE (Direct reading with contact) Size 100, 160 mm. - For corrosive gasses and liquids - Class 1 according to EN 13190 - Wetted parts and case material stainless steel - Mechanical or inductive contacts - Option: case material 1.4404 (316L) for aggressive atmosphere -
Gas filled thermometer Series: TSS (Direct measurement) Size 63 - 250 mm. - For corrosive gasses and liquids - Class 1 according to EN 13190 - Wetted parts and case material stainless steel - Option: case material 1.4404 (316L) for aggressive atmosphere -
Gas filled thermometer Series: TSFE (Remote measurement with contact) Size 100, 160 mm. - For corrosive gasses and liquids - Class 1 according to EN 13190 - Capillary 0.5 to 30 m - Mechanical or inductive contacts - Wetted parts and case material stainless steel - Option : case material 1.4404 (316L) for aggressive atmosphere -
Gas filled thermometer Series: TSF (Remote measurement) Size 63 – 250 mm. - For corrosive gasses and liquids - Class 1 according to EN 13190 - Capillary 0.5 to 30 m - Wetted parts and case material stainless steel - Option : case material 1.4404 (316L) for aggressive atmosphere -
L&T Valves Limited Trunnion Mounted Ball Valves are of 2-piece / 3-piece design, with flanged or butt-weld ends. As a standard, the valves are manufactured in bolted body designs, where the joint between the body and the connector is bolted. The bolted body design offers flexibility for dismantling during field service in case of an emergency. Welded body designs, where the joint between the body and connector is welded, are also available on request Features Trunnion-mounted Ball Valves Size 2" to 56" | ASME Class Class 150 to 2500 API 6D | API 608 2 Piece/3 Piece Construction | Full/Reduced bore Side Entry & Top Entry | Soft Seat & Metal seat Bolted & Welded | Flanged & Buttweld Design- Trunnion-mounted Ball Valve design complies to API 6D and can be offered with API 6D monogram
- Wide range of product portfolio in Side-entry and Top-entry designs
- Valves successfully tested to Shell Design Evaluation Test, Procedure 77/300 for temperature -29 to 150 degree C (O rings) and -50 to 150 degree C (Lip seals)
- Vaves for gas services can be supplied with High pressure gas test (Sniffing & Immersion Method)
- Coil springs used for consistent seat loading and lower operating torque
- Double block and bleed (DBB) feature - Valves are designed and tested for automatic cavity relief
- Lip seals are provided for low temperature services & Cryogenic services
- 2/3 stage Stem and 2 stage Body Joint sealing system; Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
- Where tight shut off is required, Double piston effect (DPE) seats provided for redundancy in sealing
-
Special Features & Benefits Design complies to API 609 Valves offered with API 609 monogram Wide portfolio of Short-pattern and Long-pattern valves Design Validation Test - 12” Class 150 valve successfully completed 10,000 cycles Fugitive emissions - Complies to ISO 15848-1 Endurance Class CO2 and Tightness class AH Fire safe by design and complies to API 607/ ISO 10497 (preferred and non-preferred direction) API RP 591 test conducted on 12” Class 150 TOBV at Element Lab, USA CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H PED Module B1 Design examination certificate (certified by DNV) available Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment SIL3 Safety Integrity Level to IEC 61508 Triple-offset Geometry minimises seat-seal contact – lower operating torque and cost of ownership Compact and light weight as compared to gate valves of the same size Hard faced in-situ body seat and flexible laminar seal ensure bubble tight sealing Single piece Anti blow out shaft Disc contour ensures mimimum turbulence and pressure drop Retainer bolting complies to ASME Section VIII Div 1 Appendix 2 -
Application- AMETEK’s TR61850 adds the capability to easily monitor and record GOOSE messages within the substation.
- TR61850 automatically merge providing a single point of reference when analyzing transient events and system disturbances.
- AMETEK’s TR61850 has IEC 61850-8 protocol for GOOSE messaging and supports subscription to 128 GOOSE messages from multiple IED’s within the substation.
- TR61850 can be used with multiple transient fault recorders to provide a single complete record for all substation events.
- Input Capacity 128 GOOSE Message subscriptions - GOOSE Messages are mapped virtual inputs - Supports mapping to multiple IED’s - 6 Hardwired digital inputs
- Field Contacts - NO/NC software programmable - Programmable debounce or filter timers - 20-150 VDC FCV
- Outputs - 8 form C (SPDT) relays, configurable functions: - Cross-Trigger, Watchdog, Loss of LAN1/2… - Energized or de-energized operation - Published GOOSE Messages - Status of 128 virtual inputs - Status of 8 contact outputs - Status of 16 hardwired inputs
- 1 msec time stamp resolution
- GOOSE Messages can be time stamped internally or by the GOOSE time stamp Time Synchronization
- IRIG-B input (modulated or demodulated)
- NTP time sync (can sync with up to 3 servers)
- IEEE1588
- Master/Slave sync with other TR61850 units via RS485
- Slave sync with TR2000/TR2500 fault recorders with internal GPS via RS485 and fiber optic PPS
- KEMA IEC61850 Compliance
-
Application- Fault and Disturbance Recorder
- Transient Fault Location
- Phasor Measurement Unit
- Power Quality Monitor
- Sequence of Events Recorder
- Built in DSP for computations
- 16 bits, 32768 levels (15 plus sign)
- Fixed 512 samples/cycle (26KHz/31KHz)
- Accuracy better than 0.1% of reading down to 3% of full scale Voltage Input Ranges
- 1.414, 10, 150, 300V RMS full-scale or custom range (AC or DC compatible) Current Input Ranges
- 1 A or 5 A RMS nominal (thru current shunts/CICT’s) Frequency Response
- DC-1/2 sampling rate Digital Inputs
- 24 to 250 VDC normally open or closed wetted contact Input Module
- 6 analog (current or voltage) and 12 digital Inputs System Capacity (1-6 Input Modules)
- 6, 12, 18, 24, 30 or 36 analog
- 12, 24, 36, 48, 60 or 72 digital (multiple units tied together for larger systems)
- 1 usec. or better
- Internal GPS receiver
- IRIG-B (Mod & TTL)
- Network Time Protocol (NTP)
- 4U (7”) 19” chassis mount
-
Application • For all types of power system events • Simultaneously perform: transient recording, disturbance recording, phasor measurements, power quality analysis, and sequence of events recording. • The system can operate automatically to retrieve events and perform an expert analysis so you have the answers fast, saving time and money. • Providing all the answers in one software platform. • The TR-2000 is ideally suited for your generation, transmission, and distribution power system monitoring. -
Application The AMETEK TR-100+ is a fully featured Digital Fault Recorder with the capability to capture and analyze short transient events, longer-term disturbances and trend input quantities such as RMS, frequency, harmonics, power and power factor. Specifications INPUTS Number of Channels • 8, 16, 24, or 32 analog- 16, 32, 48, or 64 digital (larger systems available) Voltage Inputs
- 57 to120 V RMS nominal, 212 V RMS full scale Current Inputs
- 1 A or 5 A RMS nominal (thru external current shunts/CICT’s) Frequency Response • DC to 3,000 Hz, (+0dB, -3dB) or 1/4 sample rate Accuracy
- Better than 0.2% full scale Digital Inputs • 24-250 VDC normally open or normally closed wetted contact
- Internal clock, synched to the 50/60 Hz line or optional IRIG-B
-
TOP-screw connection Screw connection with optimised design - easy to use and minimum space requirements br /> TOP GS PCB terminal system with TOP screw connection. Operated from one side only. Optional: ATEX approval. Operated from one side and extremely versatile: · High current-carrying capacity up to 32 A (IEC) or 30 A (UL) · 3 pitches (5.08 / 6.35 / 7.62 mm) for voltages up to 1000V (IEC) or 300 V (UL) · Enormous connection capacity, cross-sections up to 6 mm² · 2 outlet directions in relation to the PCB (90 / 180°) · For mounting side by side or fixed number of poles, up to 24 connections · Explosion-protected variations for ATEX zones · Attachment profile for Dekafix markers Sophisticated design and user-friendly wiring - conductor connected and the clamping point accessed from the same direction (TOP) TOP GS: the special terminal for special applications. Industrial- Electronic
- Other
-
Tools Weidmüller's professional tools are the result of an intensive development process that has been specifically focussed on the requirements of their use in practice. We offer many useful tools, e.g. no-contact tools, crimping pliers and fibre optic tools, that help you work safely and precisely for an optimised installation of heavy-duty connectors. Industrial- Machinery
-
Precision tools from Weidmüller are in use worldwide.Weidmüller takes this responsibility seriously and offers comprehensive services.Tools should still function perfectly even after many years of constant use. Weidmüller therefore offers its customers the "Tool Certification" service. This technical testing routine allows Weidmüller to guarantee the proper functioning and quality of its tools. -
Description Product range covers standing and flat designs, as well as versions with the latching hook at the top and bottom. • THT, THR or SMD soldering processes • Wide range of different design types, also with integrated LEDs and shield contact tabs • Packed either in a tray (TY) or on a roll (tape-on-reel, RL) • Extended temperature range of–40 °C to +85 °C • Reinforced gold layer for improved corrosion protection • Transmission rates of up to 1 Gbit/s -
Thermowells Series: T8416, T8916, T9144, T9357 (Welded connection) Series: T8410, T8911, T9093, T9143, T9346 (Screwed connection) Size Max. 250 bar - 360° positioning of the thermometer dial - For thermometers with smooth immersion tube without process connection - Welded or threaded - Brass, steel & stainless steel (1.4571 / 316Ti) -
Series: AGW, AGF (Process thermowells) connection) Size Max. 600 bar - Stainless steel - Max. 500 °C - Max. 1000 mm -
Tension clamp spring connection Weidmüller tension-clamp connections - simple, quick and proven reliable: The universal screw-free connection with steel spring – ideal for PCB installation terminals. Wiring with demanding requirements for cost-effective connections with contact stability. Industrial- Electronic
- Other
-
Description PXR3 is an ultra-compact temperature controller which accepts thermocouple, RTD, or 1-5 V DC as an input. It provides various control functions such as on/off control, PID control, 8-step ramp soak, and more. Industrials- Oil & Gas
- Pulp & Paper
-
Description PXF is an extremely compact temperature controller which has 48 x 48 mm, 48 x 96 mm, 96 x 96 mm front panel with a large, white LCD and 58 mm depth behind panel. Develiped as a successor to the standard model PXR, PXF4 features fast sampling speed (50 ms) equal to PXH, highly accurate input indication, and universal input, in addition to various functions of PXG, while achieving a competitive price. Equipped with multiple input/output and sophisticated control function, PXF4 seves as a suitable temperature controller for a wide range of use. Industrials- Oil & Gas
- Pulp & Paper
-
Description Digital temperature controller PXE is a compact and versatile controller that accepts thermocouples and RTD inputs and controls temperature with the ON-OFF control and PID control. Industrials- Oil & Gas
- Pulp & Paper
-
Bi - Metal Thermometers Series: TBX (Conical immersion tube) Size 80 – 160 mm. - Conical immersion tube - Class 1 according to EN 13190 - Immersion tube brass - Installed length 62 mm -
Bi - Metal Thermometers Series: TBL (For air ducts) Size 80, 100 mm. - Thermometer for direct mounting on air ducts in ventilation systems - Class 1 according to EN 13190 - Immersion tube brass - Immersion length 165 mm -
Bi - Metal Thermometers Series: TBI (Stainless steel, IP 67) Size 80 – 160 mm. - For corrosive gasses and liquids - Class 1 and 2 according to EN 13190 - Wetted parts Stainless steel - Option : case material 1.4404 (316L) for aggressive atmosphere -
Bi - Metal Thermometers Series: TBHI (Heavy industry version, IP68) Size 100, 130 mm. - For corrosive gasses and liquids - Reinforced version for harsh conditions - Class 1 and 2 according to EN 13190 - Wetted parts Stainless steel - Option : case material 1.4404 (316L) for aggressive atmosphere - Option : filling fluid in the case to avoid moisture and for applications with vibrations -
Bi - Metal Thermometers Series: TBHA (Clam-on thermometer) Size 80, 100 mm. - For clamp-on mounting on isolated pipes - Pipe diameter ¾" to 2" - Class 1 according to EN 13190 - Immersion tube brass -
Bi - Metal Thermometers Series: TB80, TB100, TB160 (Industrial standard type) Size 80, 100, 160 mm. - Multi-purpose standard thermometer - Class 1 and 2 according to EN 13190 - Immersion tube brass (option stainless steel) - Immersion length 100 – 1000 mm -
Bi - Metal Thermometers Series: TB40, TB63 (Industrial standard type) Size 40, 63 mm. - Multi-purpose standard thermometer - Class 1 and 2 according to EN 13190 - Immersion tube stainless steel - Immersion length 100 – 400 mm -
Weidmüller is a specialist in the stripping of wires and cables. The product range extends from stripping tools for small cross-sections right up to sheathing strippers for large.With its wide range of stripping products, Weidmüller satisfies all the criteria for professional cable processing. diameters. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Strip/Ring/Disc heating elements are rugged and easy to install for heat transfer by conduction or convection to heat liquids, air, gases and surfaces with sheath temperatures up to 1500°F and watt densities to 35 W/in2. Common applications include drying, melting, baking and curing. Strip heater sizes range from 0.5" wide to 2.5" and lengths to 72" long. Heaters bolt or clamp to many surfaces. Nested ring heaters can provide concentrated heat in small areas. Select from many sheath materials, termination styles, operating temperatures, sizes, voltages, wattage ratings and mounting devices. -
Stopless Flow Meter This flow meter is connected directly to feeders, conveyors, shutes, and other equipment and used for the precision measurements of flow rates of fine to bulk solids. The capacity ranges from 0 –1 kg/h to 0 –380 t/h. Decription The Stopless Flow Meter is used for measuring powders and other substanes as with the hopper scale, but differs from the hopper scale in that it is provided with two scale hoppers which permit substances to be charged into the system continuously for substance to be charged into the system continuously for measurements. Also, its installation space is reduced substantially as shown in the diagrams below, and there is no generation of zero drift due to inner dust, as contrated with the hopper scale. Related Market 1. Petrochemical 2. Coal Fire Power 3. Steel 4. Pulp & Paper -
Steel Enclosure For many years, the name Klippon® has stood for expertise and quality in enclosures - in particular if the customer requires solutions for industrial standard applications and applications in harsh environments. The Klippon® TB and Klippon® STB enclosure ranges offer superior performance characteristics and meet even the stricter requirements of explosion risk zones. The enclosures and their equipment are tested to the latest international standards, including EN 62208 and EN 60079. Irrespective of the application users are planning, Weidmüller is able to provide a variety of custom-fit enclosure versions. Weidmüller offers all its customers services on an individual basis: including turnkey enclosure solutions with customer-specific configuration (such as mounting rails, drilled holes, cable glands, cutouts, special coatings, etc. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
-
Features Natural gas pipeline operations are dramatically impacted by the presence or formation of liquids within the gas pipeline. The dew point of the natural gas must be periodically checked in order to ensure that troublesome liquid formation is not occuring in the pipeline. Operators and technicians need an accurate, rugged means of determining the dew point of the gas within the pipeline. This device is completely manual. The observor is not only the 'detector', they must also manually control the rate of mirror cooling and read the indicated temperature at the appropriate time. When used by a skilled operator, this device will produce extremely accurate dew point measurements. The Standard Dew Point Tester, is available in a variety of dew point temperature and pressure ranges. The Solution This industry need was met with the development of the Standard Dew Point Tester. The device works as follows: The sample gas to be analyzed is slowly passed, at pipeline pressure, over a mirror. The mirror is slowly cooled through the use of a manually regulated refrigerant gas. A thermometer accurately reads the temperature of the mirror while an operator observes the mirror for the formation of dew. When dew is observed, the dew point temperature is read off the thermometer. The type of dew formed on the mirror can be determined by an experienced user. Use of this device is described by ASTM D1142. Industrial- Oil & Gas
- Chemical & Petrochemical
-
Application- AMETEK’s JEMStar II has the highest accuracy in the market.
- Provides many communication options and monitors your power quality to make it the ideal choice for any metering application.
- An impressive color display makes it easy to view power measurements, phasor displays and meter diagnostics.
- The JEMStar II is easy to use and configure with our intuitive JEMWARE software and the meter display provides a user menu to show and edit configuration details.
- The JEMStar II has a GB of non-volatile memory to store your metering and power quality data for as long as you want.
- The meter has a single base model that can be used for simple revenue and billing applications as well as more complex power quality monitoring applications.
- Meter Forms: 5, 6, 8, 9, 45, Universal
- 55-530 VAC auto-ranging
- Burden*: 0.5 VA @ 530V * Does not include auxiliary power requirements.
- 1 amp: ANSI class 2
- 5 amps: ANSI class 10
- 10 amps: ANSI class 20
- Burden: 0.5 VA maximum
- Overload: 1.5x rated class current continuous
- Starting current: 0.002 A
- Frequency range: 45-55 Hz, 55-65 Hz
- Self powered via all three phases: 55-530 VAC
- External Aux Power Option: 55-530 VAC or 90-300 VDC; 19-58 VDC
- Aux Power: 55-530 VAC or 90-300 VDC; 19-58 VDC option
- 25 VA maximum
- 0.05% reading (0.02% typical) Volts, Amps
- 0.04% reading
- 16 channels storage
- 1-60 minute intervals
- Internal clock: 0.5 sec/day accuracy
- 50/60HZ line frequency
- External time sync options: IRIG-B, NTP, IEEE-1588, PPS
-
Application- AMETEK’s JEMStar II has the highest accuracy in the market.
- Provides many communication options and monitors your power quality to make it the ideal choice for any metering application.
- An impressive color display makes it easy to view power measurements, phasor displays and meter diagnostics.
- The JEMStar II is easy to use and configure with our intuitive JEMWARE software and the meter display provides a user menu to show and edit configuration details.
- The JEMStar II has a GB of non-volatile memory to store your metering and power quality data for as long as you want.
- The meter has a single base model that can be used for simple revenue and billing applications as well as more complex power quality monitoring applications.
- Meter Forms: 5, 6, 8, 9, 45, Universal
- 55-300 VAC auto-ranging
- Burden*: 0.5 VA @ 300V * Does not include auxiliary power requirements.
- 1 amp: ANSI class 2
- 5 amps: ANSI class 10
- 10 amps: ANSI class 20
- Burden: 0.5 VA maximum
- Overload: 1.5x rated class current continuous
- Starting current: 0.002 A
- Frequency range: 45-55 Hz, 55-65 Hz
- Aux Power: 55-300 VAC or 90-300 VDC Auxiliary Power Burden
- 25 VA maximum
- 0.05% reading (0.02% typical) Volts, Amps
- 0.04% reading
- 16 channels storage
- 1-60 minute intervals
- Internal clock: 0.5 sec/day accuracy
- 50/60HZ line frequency
- External time sync options: NTP
-
Application- AMETEK’s Ci20 Revenue Meter watches over your energy investment in many ways.
- It has high accuracy measurements, site diagnostics and dependable communication options to ensure maximum reliability
- Your installation investment is reduced with our innovative software wizard that provides quick set-up and configuration.
- Inventory and ordering is simplified with field upgradeable options using soft switches and plug in boards.
- 55-530 VAC auto-ranging
- Burden*: 0.5 VA @ 530V *Does not include auxiliary power requirements.
- 10 Amps: ANSI Class 20
- Burden: 0.5 VA maximum
- Overload: 1.5x rated class current continuous, 20x rated class current for 0.50 sec
- Frequency range: 45-55 Hz, 55-65 Hz
- Derived from from A,B or C phase voltage input Auxiliary Power Burden
- 15 VA maximum
- 0.15% reading Clock
- Synchronized to line
- 4 Channels of Storage (Standard) Programmable Interval
- 1-60 minutes 64 Days Storage Using Four Channels at 15-minute Intervals
-
Solid-state relays Solid-state relays are available in different forms – from modular terminal enclosures to plug-in bases for terminal rail mounting. For contactless switching and amplification of digital signals in automation engineering Based on a wide enclosure platform, Weidmüller has the optimum component for every application. Weidmüller solid-state relays are available with nominal voltages of 5 to 230 V on the input side. Optional DC and AC outputs enable the switching of loads in the most diverse applications. Industrial- Oil & Gas
- Chemical & Petrochemical
- Paper
- Steel
- Pulp & Paper
- Electronic
- Renewable Energy
- Transportation
