-
Special Features & Benefits Enhanced reliability, Longer service life Tight sealing, Consistent low torque Assured shaft sealing One-piece blowout-proof Shaft Reliable Drive - Positive shaft-disc connection Lower resistance to flow - Contoured disc Ease of installation Integral actuator mounting platform -
Aquaseal Max is a fabricated steel butterfly valve developed as an alternate for cast iron butterfly and sluice valves in water distribution systems. The highly reliable valve also finds application in power plants, utility and fire water lines, and HVAC systems. Customised Aquaseal Max can be used to handle air, gases and vacuum services. The valve has successfully under gone Proof of Design (POD) test as per AWWA C 504 and AWWA C 516. The key feature of Aquaseal Max Fabricated Steel Butterfly Valve is a Self-energising Disc Seal that uses line pressure to provide assured sealing. Special Features & Benefits Self-energising Disc Seal - Bi-directional bubble-tight sealing Assured Sealing to Atmosphere Lighter and Stronger Construction Lower Torque, Longer Life Maintenance-free Bearings -
Special Features & Benefits Design complies to API 6D Valves offered with API 6D monogram Fugitive emissions – Complies to ISO 15848-1 Fire safety - Complies to API 607/ ISO 10497 CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H PED Module B1 Design examination certificate (certified by DNV) available Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment SIL3 - Safety Integrity Level SIL3 certification complies to IEC 61508 L&T Valves Double Block & Bleed Plug Valve provides online-verifiable bubble tight sealing and is a safe and reliable replacement to the conventional two-valve system High integrity positive shut-off obtained independent of line pressure, without sealants/ lubricants Mechanical sealing ensuring online-verifiable positive double isolation for critical services Patented operator mechanism enables segments to move towards the seats during valve operation – reduces wear and tear and enhances service life Inbuilt cavity pressure relief system Inline Maintainable Seats -Seats can be renewed without removing the valve from the pipeline (after draining and isolating the line) -
Special Features & Benefits Taper Plug Design - Lower operating torque compared to lubricated plug valves Plug Adjustment Option - Enables on-line maintenance Avoids downtime Large PTFE Sleeve - Bubble-tight shutoff No metal-to-metal contact Longer service life Positively-locked Sleeve - Reliable sealing through thermal cycles Wiping action between sleeve and plug - Durability in slurry lines Reverse-lip PFA Diaphragm - Self-adjusting dynamic stem seal provides assured sealing to atmosphere Rugged Body - Long and reliable service life No Cavities - Line Fluid does not get entrapped -
High Integrity Pressure Protection System L&T Valves offers a range of customised SIL3-capable High Integrity Pressure Protection Systems (HIPPS) for over-pressure protection In industrial plants, in case of over-pressurisation, the gases released are primarily flared. Flaring and venting of flammable gases pose health and safety hazards and constitute a significant threat to the environment. -
Automation Solutions Leveraging flow-control expertise that spans five decades and in-house capabilities in system design and integration, L&T Valves offers a comprehensive range of SIL-capable Valve Automation Solutions to meet myriad industry/ process/ customer requirements. Special Features & Benefits Product Range: High Integrity Pressure Protection Systems (HIPPS) Emergency Shut Down Valves (ESDV) Shut Down Valves (SDV) Remote Operated Shutoff Valves (ROSOV) Blowdown Valves (BDV) On/ Off Valves Remote Operated Valves/ Motor-operated Valves -
Features L&T Valves launches a smart flow-control solution that enhances plant safety and reliability - L&T Valves Asset Management Program, LAMP. This IoT-ready remote valve performance monitoring system leverages expertise in valve manufacture as well as system design and integration. At the core of LAMP is a time-tested SIL3-capable valve - Ball, Butterfly, DBB Plug, Gate or Globe. Each valve is equipped with ValvTrac™ digital traceability tag that cross-links valve signature to traceability information such as valve test certificates, material test certificates, and installation, operation and maintenance manuals. The valves are upgraded to ‘Smart Valves’ by integrating them with next-generation smart sensors that measure parameters such as torque, leakage, vibration, pressure, temperature and position. The data is relayed real-time to a secure, dedicated cloud computing platform where it is analyzed to provide complete valve health and diagnostic information. Valve users can access information through a secure login, or port the data to the native asset management system through any standard field communication protocol (HART, WirelessHART, Foundation Fieldbus, etc.). To a customer, knowledge is trust; the more he knows about the state of a valve, the more confident can he be about its performance. Thus LAMP takes the guesswork out of valve maintenance and allows customers to transition from preventive maintenance based on thumb rules to predictive maintenance based on real data. -
Application • For all types of power system events • Simultaneously perform: transient recording, disturbance recording, phasor measurements, power quality analysis, and sequence of events recording. • The system can operate automatically to retrieve events and perform an expert analysis so you have the answers fast, saving time and money. • Providing all the answers in one software platform. • The TR-2000 is ideally suited for your generation, transmission, and distribution power system monitoring. -
Application- Fault and Disturbance Recorder
- Transient Fault Location
- Phasor Measurement Unit
- Power Quality Monitor
- Sequence of Events Recorder
- Built in DSP for computations
- 16 bits, 32768 levels (15 plus sign)
- Fixed 512 samples/cycle (26KHz/31KHz)
- Accuracy better than 0.1% of reading down to 3% of full scale Voltage Input Ranges
- 1.414, 10, 150, 300V RMS full-scale or custom range (AC or DC compatible) Current Input Ranges
- 1 A or 5 A RMS nominal (thru current shunts/CICT’s) Frequency Response
- DC-1/2 sampling rate Digital Inputs
- 24 to 250 VDC normally open or closed wetted contact Input Module
- 6 analog (current or voltage) and 12 digital Inputs System Capacity (1-6 Input Modules)
- 6, 12, 18, 24, 30 or 36 analog
- 12, 24, 36, 48, 60 or 72 digital (multiple units tied together for larger systems)
- 1 usec. or better
- Internal GPS receiver
- IRIG-B (Mod & TTL)
- Network Time Protocol (NTP)
- 4U (7”) 19” chassis mount
-
Application- The Platinum 2.5K Portable Multi-Function Recorder is packaged in a rugged case with quick connect interfaces for fast and simple field connection.
- Interface cables are provided with shrouded banana jacks that couple easily with a variety of measurement CT’s and voltage scaling devices offering complete flexibility for power utility and industrial use.
- High-speed sinusoid data for traditional fault recorder analysis
- Slower speed data for disturbance or swing recording
- Continuous logging of RMS and phasor data for disturbance monitoring
- Steady-state logging of RMS and harmonic spectrum values
- System frequency for power quality analysis
- 8 analog and 16 digital Voltage Inputs
- 63.5 or 110 V RMS nominal
- 480 or 600V RMS nominal (via external box) Current Inputs
- 1 A or 5 A RMS nominal (thru current transformers, other ranges available) Frequency Response
- DC – 1/2 sampling rate (1/4 sampling rate for 384 samples per cycle only) Accuracy
- Better than 0.1% of full scale Digital Inputs
- 24/48/125/250 VDC normally open or closed wetted contact
- Optional internal GPS receiver with 1 PPS output for phasor measurement Accuracy
- Normally better than +/- 60 ns
- 30 lbs. (DIM)
-
Application The AMETEK TR-100+ is a fully featured Digital Fault Recorder with the capability to capture and analyze short transient events, longer-term disturbances and trend input quantities such as RMS, frequency, harmonics, power and power factor. Specifications INPUTS Number of Channels • 8, 16, 24, or 32 analog- 16, 32, 48, or 64 digital (larger systems available) Voltage Inputs
- 57 to120 V RMS nominal, 212 V RMS full scale Current Inputs
- 1 A or 5 A RMS nominal (thru external current shunts/CICT’s) Frequency Response • DC to 3,000 Hz, (+0dB, -3dB) or 1/4 sample rate Accuracy
- Better than 0.2% full scale Digital Inputs • 24-250 VDC normally open or normally closed wetted contact
- Internal clock, synched to the 50/60 Hz line or optional IRIG-B
-
Application- AMETEK’s TR61850 adds the capability to easily monitor and record GOOSE messages within the substation.
- TR61850 automatically merge providing a single point of reference when analyzing transient events and system disturbances.
- AMETEK’s TR61850 has IEC 61850-8 protocol for GOOSE messaging and supports subscription to 128 GOOSE messages from multiple IED’s within the substation.
- TR61850 can be used with multiple transient fault recorders to provide a single complete record for all substation events.
- Input Capacity 128 GOOSE Message subscriptions - GOOSE Messages are mapped virtual inputs - Supports mapping to multiple IED’s - 6 Hardwired digital inputs
- Field Contacts - NO/NC software programmable - Programmable debounce or filter timers - 20-150 VDC FCV
- Outputs - 8 form C (SPDT) relays, configurable functions: - Cross-Trigger, Watchdog, Loss of LAN1/2… - Energized or de-energized operation - Published GOOSE Messages - Status of 128 virtual inputs - Status of 8 contact outputs - Status of 16 hardwired inputs
- 1 msec time stamp resolution
- GOOSE Messages can be time stamped internally or by the GOOSE time stamp Time Synchronization
- IRIG-B input (modulated or demodulated)
- NTP time sync (can sync with up to 3 servers)
- IEEE1588
- Master/Slave sync with other TR61850 units via RS485
- Slave sync with TR2000/TR2500 fault recorders with internal GPS via RS485 and fiber optic PPS
- KEMA IEC61850 Compliance
-
Application- The Platinum 2.5K Portable Multi-Function Recorder is packaged in a rugged case with quick connect interfaces for fast and simple field connection.
- Interface cables are provided with shrouded banana jacks that couple easily with a variety of measurement CT’s and voltage scaling devices offering complete flexibility for power utility and industrial use.
- High-speed sinusoid data for traditional fault recorder analysis
- Slower speed data for disturbance or swing recording
- Continuous logging of RMS and phasor data for disturbance monitoring
- Steady-state logging of RMS and harmonic spectrum values
- System frequency for power quality analysis
- Number of Channels 8 analog and 16 digital Voltage Inputs
- 63.5 or 110 V RMS nominal
- 480 or 600V RMS nominal (via external box) Current Inputs
- 1 A or 5 A RMS nominal (thru current transformers, other ranges available) Frequency Response
- DC – 1/2 sampling rate (1/4 sampling rate for 384 samples per cycle only) Accuracy
- Better than 0.1% of full scale Digital Inputs
- 24/48/125/250 VDC normally open or closed wetted contact
- Optional internal GPS receiver with 1 PPS output for phasor measurement Accuracy
- Normally better than +/- 60 ns
- 30 lbs. (DIM)
-
Application The Fault Recorder product family is enhanced with our full suite of software applications designed to simplify the process of configuring our recorders, retrieving event information, and analyzing the results. Tools like our automated event retrieval and expert analysis provide the quickest results when classifying an abnormal event. Detailed fault analysis is easily accomplished with our set of power analysis tools and flexible display options. -
Application- Power quality monitor--measures voltage and frequency profiles, voltage dips and surges, loss or supply, harmonic content, flicker, voltage and current imbalance
- Transient fault recorder--analog inputs are sampled at up to 128 samples per cycle with a maximum record length of 2 seconds
- Disturbance Recorder/Logger--analog inputs are sampled at up to 2 samples per cycle with RMS measurements recorded up to one minute
- Trend Recording--input and computed quantities are logged as maximum, minimum and average quantities every minute for up to 16 weeks.
- Remote Capabilities-via Ethernet or modem, and the process can be automated using the record's Auto-Call or Auto-Poll features.
- Software--wide range of application software for communicating, configuring, downloading, displaying and analyzing recorded data. Auto-poll/Call automates the complete process of retrieving your recorded data.
- 8 (4 voltage, 4 current) consult factory for other configurations Voltage Inputs
- 150/300/600 RMS maximum, Star (wye) or delta connections Current Inputs
- 1/5/100/200/500/1000 A RMS nominal thru external CTs. designed to record to 40% over-range Frequency Response
- 40Hz-3kHz. (+0dB, -3dB for voltages) DC-3kHz (+0dB for currents) Accuracy
- Better than 0.2% of full scale
- 32,768 Hz internal crystal oscillator
- 1 ms
- Time and date (including leap year and day of the year) Synchronization
- 50/60 Hz from voltage input
- Wall (internal terminals) — 11.75 in. x 16.0 in. x 8.25 in. (300 mm x 400 mm x 210 mm)
- 19" Rack Mounting — 13.25 in. x 19.0 in. x 5.25 in. (336 mm x 482 mm x 133 mm)
- Portable — 14.25 in. x 13.75 in. x 5.25 in. (362 mm x 349 mm x 133 mm) Weight
- 13.2-17.6 lbs. (6-8 kg) depending on enclosure style
-
Application- AMETEK’s JEMStar II has the highest accuracy in the market.
- Provides many communication options and monitors your power quality to make it the ideal choice for any metering application.
- An impressive color display makes it easy to view power measurements, phasor displays and meter diagnostics.
- The JEMStar II is easy to use and configure with our intuitive JEMWARE software and the meter display provides a user menu to show and edit configuration details.
- The JEMStar II has a GB of non-volatile memory to store your metering and power quality data for as long as you want.
- The meter has a single base model that can be used for simple revenue and billing applications as well as more complex power quality monitoring applications.
- Meter Forms: 5, 6, 8, 9, 45, Universal
- 55-300 VAC auto-ranging
- Burden*: 0.5 VA @ 300V * Does not include auxiliary power requirements.
- 1 amp: ANSI class 2
- 5 amps: ANSI class 10
- 10 amps: ANSI class 20
- Burden: 0.5 VA maximum
- Overload: 1.5x rated class current continuous
- Starting current: 0.002 A
- Frequency range: 45-55 Hz, 55-65 Hz
- Aux Power: 55-300 VAC or 90-300 VDC Auxiliary Power Burden
- 25 VA maximum
- 0.05% reading (0.02% typical) Volts, Amps
- 0.04% reading
- 16 channels storage
- 1-60 minute intervals
- Internal clock: 0.5 sec/day accuracy
- 50/60HZ line frequency
- External time sync options: NTP
-
Application- AMETEK’s JEMStar II has the highest accuracy in the market.
- Provides many communication options and monitors your power quality to make it the ideal choice for any metering application.
- An impressive color display makes it easy to view power measurements, phasor displays and meter diagnostics.
- The JEMStar II is easy to use and configure with our intuitive JEMWARE software and the meter display provides a user menu to show and edit configuration details.
- The JEMStar II has a GB of non-volatile memory to store your metering and power quality data for as long as you want.
- The meter has a single base model that can be used for simple revenue and billing applications as well as more complex power quality monitoring applications.
- Meter Forms: 5, 6, 8, 9, 45, Universal
- 55-530 VAC auto-ranging
- Burden*: 0.5 VA @ 530V * Does not include auxiliary power requirements.
- 1 amp: ANSI class 2
- 5 amps: ANSI class 10
- 10 amps: ANSI class 20
- Burden: 0.5 VA maximum
- Overload: 1.5x rated class current continuous
- Starting current: 0.002 A
- Frequency range: 45-55 Hz, 55-65 Hz
- Self powered via all three phases: 55-530 VAC
- External Aux Power Option: 55-530 VAC or 90-300 VDC; 19-58 VDC
- Aux Power: 55-530 VAC or 90-300 VDC; 19-58 VDC option
- 25 VA maximum
- 0.05% reading (0.02% typical) Volts, Amps
- 0.04% reading
- 16 channels storage
- 1-60 minute intervals
- Internal clock: 0.5 sec/day accuracy
- 50/60HZ line frequency
- External time sync options: IRIG-B, NTP, IEEE-1588, PPS
-
Application- AMETEK’s Ci20 Revenue Meter watches over your energy investment in many ways.
- It has high accuracy measurements, site diagnostics and dependable communication options to ensure maximum reliability
- Your installation investment is reduced with our innovative software wizard that provides quick set-up and configuration.
- Inventory and ordering is simplified with field upgradeable options using soft switches and plug in boards.
- 55-530 VAC auto-ranging
- Burden*: 0.5 VA @ 530V *Does not include auxiliary power requirements.
- 10 Amps: ANSI Class 20
- Burden: 0.5 VA maximum
- Overload: 1.5x rated class current continuous, 20x rated class current for 0.50 sec
- Frequency range: 45-55 Hz, 55-65 Hz
- Derived from from A,B or C phase voltage input Auxiliary Power Burden
- 15 VA maximum
- 0.15% reading Clock
- Synchronized to line
- 4 Channels of Storage (Standard) Programmable Interval
- 1-60 minutes 64 Days Storage Using Four Channels at 15-minute Intervals
-
Features Based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) The 5100P analyzer provides simple, easy-to-use moisture analysis using tunable diode laser absorption spectroscopy (TDLAS) in a durable, lightweight, and mobile package for measurements in natural gas. Designed to be intuitive to start-up and log data, the 5100P is the tool-of-choice for users needing to perform measurements in remote locations or verify fixed analyzer installations.- Fast response, highly accurate measurements
- Integrated sample system removes contaminants
- Rechargeable battery for at least 8 hours of operation
- Lightweight package simplifies transporting the device between locations
- Certified for use in hazardous areas
- Minimal maintenance required
- Measurement confidence
- Increased efficiency
- Oil & Gas
- Chemical & Petrochemical
-
Features ACCURATE DETERMINATION OF THE DEW POINT OF NATURAL GAS The Chanscope IITM was designed to meet the need for a user friendly dew point tester. It measures the dew point of the sample gas through the use of a chilled mirror as required by ASTM D1142. This device bears a number of significant improvements to usability over the standard dew point tester:- The mirror is illuminated making it much easier to see dew formation and identify the type of dew on the mirror
- The temperature of the mirror is displayed above the mirror itself electronically thereby making it much easier to identify the exact temperature at which the dew forms.
- The temperature sensor operates over the full range of possible dew points thereby eliminating the need to have multiple testers of varying dew point range
- Oil & Gas
- Chemical & Petrochemical
-
Features The 303B offers highly accurate portable measurement of trace moisture in gas streams for division 2 areas. Using an electrolytic (P2O5) sensor, the 303B can be used to monitor nearly all gases. It is compact, lightweight, and suitable for both portable use and permanent installation in Class I Div. 2 areas. With the optional carrying bag and lightweight design, the 303B is truly portable. APPLICATIONS : The 303B is designed to measure moisture content in gases such as air, nitrogen, argon, natural gas, and others with comparable characteristics. Typical applications are:- Monitoring natural gas pipelines and gas treatment processes
- Monitoring air humidity in dry boxes
- Continuous monitoring of atmospheres in simulated space chambers
- Sensing elements in humidity control systems
- Monitoring inert protective atmospheres in brazing or sintering furnaces
- Monitoring moisture in many fluorocarbon gases
- Constant measurement of batch and continuous driers to assure quality control without the expense of overdrying
- Monitoring anhydrous batch chemical processes at startup
- Quality control of transistor and diode backfill gas
- Instrument air systems
- Cryogenic processes
- Radar waveguides
- Oil & Gas
- Chemical & Petrochemical
-
Features The Ranarex Portable Gas Gravitometer is an easy-to-use, fast responding gas gravitometer that is used to determine the specific gravity of a process gas as compared with air. This unit offers multiple scales and field-proven accuracy within 0.05% of actual value at any reading. Dual ranges are available: 0.52-1.03 and 0.097-1.90 relative density (specific gravity). Plant and process operators need a reliable, simple means of confirming the quality or mixture of process gases. The means used to perform these tests must be reliable, accurate, and very affordable. For many processes and situations, gas quality can be easily inferred through a simple analysis of the gas mixture's specific gravity as opposed to a complex spectral analysis. Industrial- Oil & Gas
- Chemical & Petrochemical
-
Features Natural gas pipeline operations are dramatically impacted by the presence or formation of liquids within the gas pipeline. The dew point of the natural gas must be periodically checked in order to ensure that troublesome liquid formation is not occuring in the pipeline. Operators and technicians need an accurate, rugged means of determining the dew point of the gas within the pipeline. This device is completely manual. The observor is not only the 'detector', they must also manually control the rate of mirror cooling and read the indicated temperature at the appropriate time. When used by a skilled operator, this device will produce extremely accurate dew point measurements. The Standard Dew Point Tester, is available in a variety of dew point temperature and pressure ranges. The Solution This industry need was met with the development of the Standard Dew Point Tester. The device works as follows: The sample gas to be analyzed is slowly passed, at pipeline pressure, over a mirror. The mirror is slowly cooled through the use of a manually regulated refrigerant gas. A thermometer accurately reads the temperature of the mirror while an operator observes the mirror for the formation of dew. When dew is observed, the dew point temperature is read off the thermometer. The type of dew formed on the mirror can be determined by an experienced user. Use of this device is described by ASTM D1142. Industrial- Oil & Gas
- Chemical & Petrochemical
-
Features The 3050 Moisture Analyzer series measures trace levels of moisture in a gas through the use of a quartz-crystal oscillator sample cell. AMETEK is the leader in quartz-crystal technology, which for thirty years has offered significant advantages over other measurement techniques: • Most accurate trace moisture measurement technology available • Responds far faster to both increasing and decreasing moisture levels • Specific to moisture in most applications • Provides a much more rugged sensor Because of these advantages, the quartz-crystal oscillator has become the industry standard for applications ranging from ultrahigh purity semiconductor gases to natural gas streams containing 30% H2S. Now, the 3050 analyzers bring the benefits of quartz-crystal technology to a broad spectrum of moisture applications. AME Vision Display Unit AMEVision allows users to continually monitor the measurement and diagnostic information from up to eight 3050 series moisture analyzers. AMEVision provides real-time moisture measurements, trend data, and details a variety of maintenance and troubleshooting information from the 3050. Users can communicate with AMEVision via Modbus RS485 and Ethernet LAN. • Compatible with 3050 models OLV, SLR, DO, and TE • Connect up to eight analyzers on one unit • Trend history • Automatic data capture and logging • Calibration history • Alarm history Industrial- Oil & Gas
- Chemical & Petrochemical
-
Features The versatile AMETEK 5000 is a highly sensitive moisture analyzer for process applications where the continuous, reliable measurement of moisture in vapors and gases is required. The 5000 analyzer measures moisture on-line by monitoring the vibrational frequency change of a hygroscopically sensitized quartz crystal that is exposed alternately to wet sample and dry reference gas for 30 second periods. The reference gas is sample gas passed through a molecular sieve dryer to remove virtually all its moisture content. TYPICAL APPLICATIONS- Catalytic Reforming
- Moisture in Olefins
- Moisture in Natural Gas
- Petroleum Refining - reforming; alkylation; LPG; light hydrocarbons; isomerization
- Natural Gas - cryogenic extraction; transmission stations; storage/distribution; LNG; production
- Petrochemicals - cracked gas; propylene; butadiene; ethylene
- Chemicals - fluorocarbon gases; vinyl chloride; vinyl fluoride; refrigerants; reactor gas blankets; methyl chloride
- Enhanced Oil Recovery - CO2 pipelines
- Electronics - doping gases; dielectric gases; soldering furnace atmospheres; brazing furnace atmospheres; blanketing gases
- Metals - annealing furnace atmospheres
- Oil & Gas
- Chemical & Petrochemical
-
Features 5100 Based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) The 5100 hosts a single laser platform to measure a single gas analyte. The device can measure any one of the following gas analytes: water vapor, methane, hydrogen sulfide, carbon dioxide, and oxygen in process or flue gas. If water vapor is the measured gas analyte, methane can be monitored additionally at percent levels using the same laser. A key feature of the 5100 is the use of a sealed reference cell, which contains a known amount of analyte gas measured, for referencing the emission wavelength of the laser. The use of a reference cell enables both the ability to line-lock the lasers and to continuously verify the instrument calibration. The 5100 is designed to handle sample gases with dew points as high as 55ºC. For higher temperature dew point applications the 5100HD is recommended.- All digital signal processing
- Web-based interface
- Connectivity by modbus, ethernet and analog
- Real-time performance monitoring
- Fully integrated sample handling
- Resistant to contamination
- Reference Cell enables Line Lock and Span Verification The 5100 offers high specificity, selectivity, speed of response and great reliability
- Oil & Gas
- Chemical & Petrochemical
-
Features 5100HD Based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) The 5100HD hosts a dual laser platform. Two separate lasers are installed in the instrument, sharing a common optical path through the sample, enabling the measurement of two analytes simultaneously. This results in significant cost savings to our customers. Where the required concentrations of the analytes differ considerably such that different path lengths are required, two sample cells are used. The 5100HD is also capable of dual stream analysis, and can measure any two combinations of water vapor, methane, hydrogen sulfide, carbon dioxide, and oxygen in process or flue gas. Designed to handle sample gases with high dew points, the 5100HD standard version has its sample cell heated to a maximum of 100°C. A version is also available for 150°C. A key feature of this analyzer is the use of sealed reference cells, which contain known amounts of analyte gases measured, for referencing the emission wavelengths of the lasers. The use of reference cells enables both the ability to line-lock the lasers and to continuously verify the optical system performance. Industrial- Oil & Gas
- Chemical & Petrochemical
-
Features The 241CE II Hydrocarbon Dew Point Analyzer is a quality control tool for natural gas processing, distribution and consumption. Detection and measurement of hydrocarbon dewpoint is achieved in a single cell, single cycle operation. The dew point analyzer uses patented chilled-mirror technology. With the 241CE II Hydrocarbon Dew Point Analyzer, all monitoring and measuring of dew points is done automatically under control of an onboard computer, rather than by an operator. The dew point analyzer was designed for unattended operation. Accurate and objective direct measurement of hydrocarbon dew point temperature at pipeline pressure or Cricondentherm- Proprietary three-stage filter provides superior protection
- Designed for unattended operation with low maintenance
- Compact design allows mounting in optional enclosures
- Digital communications vis Modbus RTU protocol
- Fully integrated sample system
- Hydrocarbon dew point temperature current output
- Oil & Gas
- Chemical & Petrochemical
-
Features AMETEK’s 2850 Moisture Analyzer establishes a new standard in clean gas moisture analyzers: ultrafast response speed, exceptional accuracy, virtually no interferences, multigas compatibility, and on-board measurement verification. This unique combination of capabilities makes the 2850 the moisture analyzer of choice for monitoring process desiccant dryers, instrument air dryers, or air separators, and for industrial gas production and quality assurance. Typical Applications- Industrial gas production and quality assurance
- Cryogenic air separation
- Process dryers
- Oil & Gas
- Chemical & Petrochemical
-
Features The 3050 Moisture Analyzer series measures trace levels of moisture in a gas through the use of a quartz-crystal oscillator sample cell. AMETEK is the leader in quartz-crystal technology, which for thirty years has offered significant advantages over other measurement techniques:- Most accurate trace moisture measurement technology available
- Responds far faster to both increasing and decreasing moisture levels
- Specific to moisture in most applications
- Provides a much more rugged sensor Because of these advantages, the quartz-crystal oscillator has become the industry standard for applications ranging from ultrahigh purity semiconductor gases to natural gas streams containing 30% H2S. Now, the 3050 analyzers bring the benefits of quartz-crystal technology to a broad spectrum of moisture applications. AME Vision Display Unit AMEVision allows users to continually monitor the measurement and diagnostic information from up to eight 3050 series moisture analyzers. AMEVision provides real-time moisture measurements, trend data, and details a variety of maintenance and troubleshooting information from the 3050. Users can communicate with AMEVision via Modbus RS485 and Ethernet LAN.
- Compatible with 3050 models OLV, SLR, DO, and TE
- Connect up to eight analyzers on one unit
- Trend history
- Automatic data capture and logging
- Calibration history
- Alarm history
- Oil & Gas
- Chemical & Petrochemical
-
Features Critical moisture measurement applications include high purity gas production; olefin manufacture, storage, and transmission; semiconductor gases; and industrial gas production and quality assurance. For these applications and more, turn to the 5800 Moisture Analyzer. This analyzer offers a truly remarkable combination of performance benefits: exceptional accuracy, multi-gas compatibility, fast response speed, and wide measurement range. Industrial- Oil & Gas
- Chemical & Petrochemical
-
Features Measuring moisture in natural gas is not a difficult application, but reliably measuring on a continuous basis is. Glycols and entrained compressor oils can quickly contaminate or damage most moisture sensors. In addition, many moisture analyzers have no means to detect the presence of such contamination, leading to inaccurately monitored or completely unmonitored gas streams. Industrial- Oil & Gas
- Chemical & Petrochemical
-
Features Building upon the success of our quartz-crystal moisture measurement technology, the 5830 is an easy-to-use process moisture analyzer that offers a truly remarkable combination of performance features: exceptional accuracy, multi-gas compatibility, fast response speed, and wide measurement range. The 5830 is ideal for critical moisture measurement applications including high purity gas production, semiconductor gases, and industrial gas production and quality assurance. Equipped with an on-line verification system, this state-of-the-art analyzer is designed to rapidly build and maintain operator confidence in its analyses. The verification system allows you to challenge the analyzer’s sensor at will with either a zero gas or an actual NIST-traceable moisture concentration to check both its baseline stability and responsiveness to real moisture. No other manufacturer offers these exclusive abilities in their moisture analyzers. Industrial- Oil & Gas
- Chemical & Petrochemicaly
-
Features The 5910 analyzer provides a quantum leap forward in performance across all measurable parameters. The 5910 is sensitive to changes in moisture concentration of less than 500 pptv. We know this because the nominal noise level is below 50 pptv. The result of these phenomenal abilities is an accuracy of better than ±100 pptv or ±10% of reading. Typical Applications Continuous Monitoring : Continuous moisture analysis is a valuable tool for quality assurance and process monitoring. As a quality assurance analyzer, the 5910 verifies that specified gas purity levels are maintained at on‑site separation, bulk delivery and distribution system transfer points, and ultimately, at points-of-use. The 5910 satisfies all the demands of continuous monitoring principally low detection limit, high measurement accuracy, and internal verification. Analytical Carts : The 5910 is the perfect analyzer for temporary monitoring applications for verifying installation, maintenance, or repair of gas distribution systems. Such temporary or spot testing makes excellent use of the unique combination of capabilities provided by the 5910—very fast response speed, especially to decreasing moisture concentrations for monitoring system dry-down; complete compatibility with O2, H and inerts; rapid start-up response; and the ability to quickly change from one gas to another. Industrials- Oil & Gas
- Chemical & Petrochemical
-
Features Building upon the success of our quartz-crystal moisture measurement technology, the 5920 is an easy-to-use process moisture analyzer that offers a truly remarkable combination of performance features: multi-gas compatibility, exceptional accuracy, on-line verification, fast response speed, and wide measurement range. The 5920 is ideal for critical moisture measurement applications including high purity gas production and semiconductor gases. Equipped with an on-line verification system, this analyzer is designed to rapidly build and maintain operator confidence in its analyses. The verification system allows you to challenge the analyzer’s sensor at will using a zero gas to check its baseline stability to confirm the sensor’s stability and sensitivity to low ppbv moisture concentrations. Industrial- Oil & Gas
- Chemical & Petrochemical
-
The IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. The analyzer is capable of measuring up to eight wavelengths in a gas or liquid phase sample. Sample handling and conditioning systems are available as an option that is integrated into the IPS-4s sample cell enclosure. Features- Measures up to 8 wavelengths
- Low cost of ownership
- No annual, routine maintenance
- No moving parts
- IP65 (NEMA 4X optional)
- Integrated, customizable sample system
- Ethernet and MODBUS communications
- Oil & Gas
- Chemical & Petrochemical
- Power
-
The 930 H2S Vapour Space Analyzer was developed for sulfur pit storage applications. The 930 has been field proven as one of the industry’s most reliable instruments for monitoring H2S and SO2. The analyzer uses a proprietary high resolution UV technology in a dual beam, multiple wavelength configuration. Resolution better than 0.02 nm is provided by high intensity, line source lamps. These sources emit at a fixed wavelength, providing great measurement stability, and emit low total power, removing the potential for sample photolysis. The dual beam configuration, combined with the reference measurement, ensures low noise performance, with minimal baseline and span drift. Features- Simultaneous, accurate measurement of both H2S and SO2
- Output alarms for H2S (LEL) and SO2 (smoldering fire)
- Common design with Model 900 (air demand) and Model 910 (stack gas)
- Exceptional baseline stability
- Improved sample conditioning via ASR Probe
- Oil & Gas
- Chemical & Petrochemical
- Power Plant
-
Features AMETEK Process Instruments has been the leader in tail gas analysis for over 40 years-with more than 1,100 installed 880 NSL analyzers and more than 100 million hours of run time. The 888, the successor of the 880 NSL uses field-proven and highly reliable UV technology to accurately monitor the H2S and SO2 concentrations in sulfur recovery tail gas. This compact, rugged analyzer mounts directly on the process pipe, eliminating the complexity and safety issues of fiber optic coupled photometers. The 888 is the evolution of a well proven formula. All the best elements of the iconic 880 NSL are still there; Four year lamp life, no shelter required and steam blow back for ammonia salts. Building on this success the 888 offers improvements in a number of key areas. Industrial- Oil & Gas
- Chemical & Petrochemical
- Power Plant
-
Features In the past, conventional Claus Sulfur recovery processes were adequately controlled on the basis of ratio or excess process air. The development of new and modified sulfur recovery processes has dramatically changed the analytical requirements placed on the tail gas analyzer. These applications require accurate chemical concentration data over wide dynamic ranges. Selective oxidation processes may require the analyzer to control the H2S/SO2 ratio at values ranging from 1:7 to greater than 10:1. In addition there is an increased need to provide reliable process data during upset conditions to endure correct response to such conditions. Industrial- Oil & Gas
- Chemical & Petrochemical
-
The 931 uses a sophisticated UV-VIS photometer to measure any single UV-absorbing gas species for process monitoring and control. Additional IR and thermal conductivity sensors capable of detecting non-UV absorbing species, such as CO2 and H2 can be incorporated into the design. The 931 is provided as an explosion-proof package making it suitable for most chemical and petrochemical applications. Features- Class I, Division 1, or ATEX II 2 G Hazardous Area Rating
- Direct measurement
- Provision to return sample to process (with heated acid gas probe option)
- Minimal sample conditioning
- Dual-beam, dual-wavelength design
- Optional detectors available (thermal conductivity-hydrogen and IR-hydrocarbon
- Oil & Gas
- Chemical & Petrochemical
- Power Plant
-
Features The 914 is a built-to-order Continuous Emission Monitor (CEM) that includes all the components needed for a compliance monitoring and reporting project. The system uses dry extractive sampling techniques designed to meet government regulations for all types of compliance monitoring. The sample extraction system of the 914 combines a temperature controlled sample conditioning unit and a heated sampling line to ensure the integrity of the sample gas is reliably maintained. The sample gas is then dried (moisture removed) as required and introduced into the instruments for analysis. Industrial- Oil & Gas
- Chemical & Petrochemical
- Power Plant
-
Description This flowmeter is a clamp-on type ultrasonic flow meter based ontransit-time measuring method. Making full use of the latest electronics and digital signal processing technologies, we realized a compact and lightweight design, and improved the accuracy and easiness to use while keeping with anti-bubble performance. The communication function (MODBUS : Option) is also applicable. Industrials- Oil & Gas
- Pulp & Paper
-
Description This flowmeter is a clamp-on type ultrasonic flow meter based ontransit-time measuring method. Making full use of the latest electronics and digital signal processing technologies, we realized the equipment with improved anti-bubble performance and high accuracy. The communication function (MODBUS : Option) is also applicable. Industrials- Oil & Gas
- Pulp & Paper
-
Description Portable type ultrasonic flowmeter consists of a compact and lightweight flow transmitter and a clamp-on detector. With the latest electronics and the digital signal processing technology, it delivers precise measurement while allowing easy operation. New feature : renewed panel design, improved display visibility and connector reliability, and more accessories. Industrials- Oil & Gas
- Pulp & Paper
-
Description PXF is an extremely compact temperature controller which has 48 x 48 mm, 48 x 96 mm, 96 x 96 mm front panel with a large, white LCD and 58 mm depth behind panel. Develiped as a successor to the standard model PXR, PXF4 features fast sampling speed (50 ms) equal to PXH, highly accurate input indication, and universal input, in addition to various functions of PXG, while achieving a competitive price. Equipped with multiple input/output and sophisticated control function, PXF4 seves as a suitable temperature controller for a wide range of use. Industrials- Oil & Gas
- Pulp & Paper
-
Description PXR3 is an ultra-compact temperature controller which accepts thermocouple, RTD, or 1-5 V DC as an input. It provides various control functions such as on/off control, PID control, 8-step ramp soak, and more. Industrials- Oil & Gas
- Pulp & Paper
-
Description Digital temperature controller PXE is a compact and versatile controller that accepts thermocouples and RTD inputs and controls temperature with the ON-OFF control and PID control. Industrials- Oil & Gas
- Pulp & Paper
-
Description This is a paperless recorder that displays measured data on the LCD is real time and stores data in Compact Flash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 6 channels at the maximum. The data stored in Compact Flash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.) Industrials- Oil & Gas
- Pulp & Paper
-
Description This is a paperless recorder that displays measured data on the LCD is real time and stores data in Compact Flash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 18 channels at the maximum. The data stored in Compact Flash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.) Industrials- Oil & Gas
- Pulp & Paper
-
Description This is a paperless recorder that displays measured data on the LCD is real time and stores data in Compact Flash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 18 channels at the maximum. The data stored in Compact Flash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.) Industrials- Oil & Gas
- Pulp & Paper
-
Description This is a paperless recorder that displays measured data on the LCD is real time and stores data in Compact Flash. The type of input such as thermocouple, resistance bulb, D.C. voltage (current), etc. can be arbitrarily set to 36 channels at the maximum. The data stored in Compact Flash can be regenerated on the screen, and the use of supplied support software allows the data to be regenerated on a PC screen. The data recorded in ASCII format can be directly read in a spreadsheet such as Excel, which facilitates the processing on a PC. (The data recorded in binary format cannot be read in.) Industrials- Oil & Gas
- Pulp & Paper
-
Description FCX-AIII series transmitters are electronic transmitters which use electrostatic capacitance sensors. They feature compact design, high accuracy, and long-term stability, and offer a variety of diaphragm materials. You can select from: type L housing suited to a vertical pipe, type T housing to horizontal pipe, and direct mount type. Industrials- Oil & Gas
- Pulp & Paper
-
Description This water level transmitter is used for measuring the level of clean water, sewage water, well, river, etc. The detector is placed on the bottom of the water, and the water head pressure acting on the pressure receiving diaphragm is detected, converted into a current signal and then transmitted to a receiving instrument via the connector terminal. Industrial- Oil & Gas
- Pulp & Paper
-
Description The FCX-AIII level transmitter accurately measures liquid level and transmits a proportional 4 to 20 mA signal. The transmitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality. Industrial- Oil & Gas
- Pulp & Paper
-
Description DDM-TMA1 (its nick name is Tamaichi) is designed to measure the dust concentration in wet flue gases. The measuring principle of DDM-TMA1 is Non-sampling Light Scattering method. The wet flue gas passes inside of the high performance heater which vanishes the mist in the wet flue gases, and the light scattering dust detector measures just the dust concentration in the wer flue gases. The air curtain prevents the wet flue gas flow around the detection area from interfering with the detection area. DDM-TMA1 can monitor dust concentration even in heavy wet flue gases. Industrials- Oil & Gas
- Chemical & Petrochemical
- Power
- Steel
- Pulp & Paper
-
Applications This range offers over 260 versions. Choose MNX if you have a large product family that needs to be housed in matching enclosures with the minimum of fuss, no matter the environment or installation height. For the protection of electrical and electronic components of all kinds. Related Market Power Generation, Distribution, Oil & Gas, Metals & Mining, Medical, Pulp & Paper, Food & Beverage, Transportation -
Application Wherever functions, such as push buttons and sensors, need to see the light of day, Piccolo is the neat solution. It’s also modular and adaptable, with a range of sizes and accessories. Related Market Power Generation, Distribution, Oil & Gas, Metals & Mining, Medical, Pulp & Paper, Food & Beverage, Transportation -
Application If you need major impact resistance, then CAB may be the cabinet for you. Think of the harshest and most demanding environments – CAB will not let you down. It will resist weathering and take the knocks better than steel. A wide selection is available. Related Market Power Generation, Distribution, Oil & Gas, Metals & Mining, Medical, Pulp & Paper, Food & Beverage, Transportation -
Application As its name suggests, Tempo doesn’t like to hang around. Need an enclosure that’s easy on the pocket and installed in seconds, but still gets the job done? Tempo does all this and still meets high, recognised standards. Related Market Power Generation, Distribution, Oil & Gas, Metals & Mining, Medical, Pulp & Paper, Food & Beverage, Transportation -
Application Euronord enclosures come in over 170 standard sizes, meaning huge interchangeability with the products you may already have. The latest addition Euronord 3 range incorporates a number of innovative features, for example quick release corrosion resistant cover screws, and recessed middle area of the cover for membrane keyboards and prints. Related Market Power Generation, Distribution, Oil & Gas, Metals & Mining, Medical, Pulp & Paper, Food & Beverage, Transportation -
Specifications Wiring Duct Narrow Slot, Light Grey, 2 Meter SIZE 25 x 25 - 150 x 100 mm. Related Market Electrical Industrial Components -
Specifications Wiring Duct Wide Slot, Light Grey, 2 Meter SIZE 25 x 25 - 150 x 100 mm. Related Market Electrical Industrial Components -
Specifications Wiring Duct Solid Wall, Light Grey, 2 Meter SIZE 25 x 25 - 150 x 100 mm. Related Market Electrical Industrial Components -
Description Trinity Touch Wiring Ducts is the product, available in wide range to accommodate wires and cables for the smallest wall mounted panel to larger integrated systems. -
Description Trinity Touch halogen free wiring ducts are outstanding not only for high quality standards and superior technical characteristics.But also, for the variety of models and proven easy installation. -
Specifications Halogen Free Narrow Slot, Silver Grey, 2 Meter SIZE 25 x 40 - 100 x 100 mm. Related Market Electrical Industrial Components -
Specifications Halogen Free Wide Slot, Silver Grey, 2 Meter SIZE 25 x 40 - 100 x 100 mm. Related Market Electrical Industrial Components -
Specifications Halogen Free Solid Wall, Silver Grey, 2 Meter SIZE 25 x 40 - 100 x 100 mm. Related Market Electrical Industrial Components -
Type- Rivet installation tool
- Wiring Duct cutting tool
- Rivet
-
Application These enclosures are ideal for mounting equipment on panels or racks in indoor or outdoor applications where it is necessary to protect controls and instrumentation from wet, non-corrosive environments. The design features Hoffman’s exclusive PowerGlide Handle with 3-point latching for secure closure. Size 5.50 x 4.41 - 17.50 x 14.41 -
Application These enclosures are ideal for mounting equipment on panels or racks in indoor or outdoor applications where it is necessary to protect controls and instrumentation from wet, non-corrosive environments. The design features Hoffman’s exclusive PowerGlide Handle with 3-point latching for secure closure. Size 72.06 x 25.06 x 18.06 - 72.06 x 37.06 x 24.06 -
Application The Type 4 rating and polyester powder coating make these enclosures ideal for outdoor environments or food processing applications where it is necessary to protect controls and instrumentation from wet, non-corrosive environments. Featuring a continuous hinge with clamps, the enclosures are supported by floor stands that provide additional height and access for cleaning under the enclosure. Equipment can be mounted on either panels or racks. Size 62.06 x 48.06 x 10.06 - 74.06 x 72.06 x 24.06 -
Application Use stylish Concept EMC Enclosures with their convenient quarter-turn latches in indoor or outdoor applications to contain stray electromagnetic interference (EMI) signals produced by internal components and to shield those components from external EMI/RFI interference. Size 13.00 x 13.00 - 69.00 x 33.00 -
Application Use stylish Concept EMC Enclosures with their convenient quarter-turn latches in indoor or outdoor applications to contain stray electromagnetic interference (EMI) signals produced by internal components and to shield those components from external EMI/RFI interference. Size 10.20 x 10.20 - 34.20 x 22.20 -
Application Enclosures have gasketed, overlapping doors to keep the elements at bay and floor stands that provide additional height and access for cleaning under the enclosure. Because there is no centerpost, it is simple to install and remove panels. Size 50.00 x 38.00 - 68.00 x 68.00 -
Application The Type 4 rating and polyester powder coating make these enclosures ideal for outdoor environments or food processing applications where it is necessary to protect controls and instrumentation from wet, non-corrosive environments. Featuring a continuous hinge with clamps, the enclosures are supported by floor stands that provide additional height and access for cleaning under the enclosure. Equipment can be mounted on either panels or racks. Size 62.06 x 48.06 x 10.06 - 74.06 x 72.06 x 24.06 -
Application This two-door enclosure provides industry-leading protection for systems incorporating large components or complex mounting configurations in highly corrosive environments. It is typically used in food processing plants, pharmaceutical manufacturing facilities, petrochemical plants, pulp and paper processing and water treatment facilities. Size 56.00 x 44.00 - 68.00 x 68.00 -
Application Designed to house systems incorporating large components or complex mounting configurations. Three-point latching and sealing provide industry-leading protection from dust, dirt, oil and water. These enclosures are used in machine tool applications for housing motor starters, drives, contactors and PLCs, as well as a wide variety of other electrical and electronic equipment. The addition of 19-in. rack-mounting accessories makes these enclosures ideal for providing rugged protection for sensitive rack-mounted components in harsh industrial environments. These enclosures are used extensively in automotive, pulp and paper, wood products, textile and similar industries. Four styles are available to provide maximum flexibility Size 60.06 x 24.06 x 18.06 - 90.06 x 36.06 x 36.06 -
Application For use in indoor and outdoor corrosive environments that require a water-tight seal, this enclosure's seamless foam-in-place gasket and screw-down clamps provide a secure seal against contaminants. Size 13.00 x 9.00 - 45.00 x 33.00 -
Application These enclosures feature Hoffman's exclusive PowerGlide Handle with 3-point latching, ideal for indoor or outdoor applications that require corrosion protection, convenient access, and padlocking security. Size 21.00 x 17.00 - 57.00 x 33.00 -
Application Ideal for indoor or outdoor EMC applications to contain larger controls in corrosive environments. Features a stainless steel, woven-mesh encased gasket to keep out contaminants and provide EMI/RFI shielding to internal components. Size 13.00 x 9.00 - 57.00 x 33.00 -
Application Designed to house systems incorporating large components or complex mounting configurations. Three-point latching and sealing provide industry-leading protection from dust, dirt, oil and water. These enclosures are used in machine tool applications for housing motor starters, drives, contactors and PLCs, as well as a wide variety of other electrical and electronic equipment. The addition of 19-in. rack-mounting accessories makes these enclosures ideal for providing rugged protection for sensitive rack-mounted components in harsh industrial environments. These enclosures are used extensively in automotive, pulp and paper, wood products, textile and similar industries. Size 60.06 x 48.06 x 18.06 - 90.06 x 72.06 x 36.06 -
Application Providing outstanding protection against corrosion and the elements, the clean lines and molded, embossed design of Ultrx fiberglass enclosures make them the most stylish and aesthetically pleasing of their class. Size 19.53 x 15.59 x 8.66 - 29.84 x 23.43 x 16.57 -
Application A full range of modification options are available for wall-mount fiberglass enclosures, including variable depths to accommodate larger controls. These enclosures feature padlockable polyester latches, or Hoffman’s exclusive PowerGlide Handle with 3-point latching, for ease of access with increased security. Size 21.00 x 17.00 - 27.00 x 21.00 -
Application Enclosures feature a flat, overlapping cover design that ensures a more-secure seal. Available with solid and window covers. Latches provide easy access and security Size 4.88 x 4.88 - 16.75 x 14.88 -
Application Enclosures feature a raised, hinged, overlapping cover design that ensures a more-secure seal and offers increased internal space for mounting components. Available with solid and window covers. Latches provide easy access and security. Size 8.75 x 6.88 - 16.75 x 14.88 -
Application An economical housing for corrosive environments, single-door, free-stand enclosures provide a versatile solution for applications that require flexibility when mounting panels and racks. Benefits include easy access to equipment, larger capacity for control systems, steel reinforcements for stability and strength, captivated door screws and an optional PowerGlide Handle for secure latching. Size 72.00 x 25.00 x 24.50 - 72.00 x 25.00 x 24.50 -
Application An economical way to house electronics in corrosive environments, two-door enclosures provide easy access to equipment, larger capacity for control systems and steel reinforcements that ensure stability and strength. These enclosures feature captivated door screws and an optional PowerGlide Handle for secure latching. Size 56.00 x 22.00 - 56.00 x 22.00 -
Application Lightweight enclosures protect components and controls in indoor applications. Size 4.88 x 4.88 - 14.75 x 12.88
