Product & Service

Home/Product & Service
  • OMNIMATE Power HP The pluggable connections for power electronics - optimised for modern drive technologies, e.g. motor starters, frequency converters and servo-controllers. OMNIMATE Power sets the new standard – with increased safety and innovative solutions such as the pluggable shield, integrated signal contacts and one-handed operation. The three product lines offer you further advantages: · Application-oriented scalability: from the compact 4 mm² connector for 29 A (IEC) or 20 A (UL) up to the sturdy 16 mm² connector for 76 A (IEC) or 54 A (UL) · Unlimited usage up to 1,000 V (IEC) or 600 V (UL) · A variety of application optimised mounting options Industrial
    • Electronic
    • Other
    Details
  • OMNIMATE Power BV / SV 7.62HP Hybrid – for power, signals and EMC Three functions in one. The OMNIMATE Power Hybrid connector provides developers and users with the perfect three-in-one solution. This hybrid motor connector simultaneously unites power, signals and pluggable EMC shield support. Thus you save space on the PCB, on the outer side of the housing, and in the electrical cabinet. The self-snapping one-handed interlock mechanism requires only one plugging step and thus speeds up installation and maintenance procedures. It is easy to handle and interlocks automatically – even in difficult installation positions. The unique shielding shape and slender 30° wire entry enable a space savings of up to 10 cm between rows. Industrial
    • Electronic
    Details
  • NPN-PNP inverter Passive M12 distributors are available in all conceivable forms and configurations. Furthermore, a number of special versions, e.g. SAI distributors for EX zones or the ergonomic M8, are available only from Weidmüller. These innovative products are backed up by numerous proprietary rights. Industrial Machinery, device manufacturer
    Details
  • Description DDM-TMA1 (its nick name is Tamaichi) is designed to measure the dust concentration in wet flue gases. The measuring principle of DDM-TMA1 is Non-sampling Light Scattering method. The wet flue gas passes inside of the high performance heater which vanishes the mist in the wet flue gases, and the light scattering dust detector measures just the dust concentration in the wer flue gases. The air curtain prevents the wet flue gas flow around the detection area from interfering with the detection area. DDM-TMA1 can monitor dust concentration even in heavy wet flue gases. Industrials
    • Oil & Gas
    • Chemical & Petrochemical
    • Power
    • Steel
    • Pulp & Paper
    Details
  • - Size 150 mm - For corrosive process fluids and atmospheres - Accuracy ± 2 % F.S. - Static pressure max. 100 bar - Housing and wetted parts stainless steel
    Details
  • - Size 100 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - Wetted parts Stainless steel (MTX5) or Brass (MTA5) For non-corrosive (MTA5) and corrosive gases (MTX5)
    Details
  • - Size 50 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - Wetted parts Stainless steel (MTX5) or Brass (MTA5) - For non-corrosive (MTA5) and corrosive gases (MTX5)
    Details
  • - Size 63 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - For clean and non-corrosive gases
    Details
  • - Size 50 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - For clean and non-corrosive gases
    Details
  • - Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Mechanical contacts 1 or 2 set points - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • Description TS 35X7.5/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanized, chromium-plated
     TS 35X15/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 15, with slot, Steel, galvanized, chromium-platedTS
    35X7.5 2M/CRN
    • Mounting rail, TS 35, TS 35 x 7.5, without slot, Stainless steel, untreated
    Details
  • Description TS 35X7.5/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 7.5, with slot, Steel, galvanized, chromium-plated
    TS 35X15/LL 2M/ST/ZN
    • Mounting rail, TS 35, TS 35 x 15, with slot, Steel, galvanized, chromium-plated
    TS 35X7.5 2M/CRN
    • Mounting rail, TS 35, TS 35 x 7.5, without slot, Stainless steel, untreated
     
    Details
  • Description ADT 2.5 2C - Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A, Dark Beige ADT 2.5 2C BL - Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A,Blue ADT 4 2C - Test-disconnect terminal, PUSH IN, 4 mm², 500 V, 20 A, Dark Beige ADT 4 2C BL - Test-disconnect terminal, PUSH IN, 4 mm², 500 V, 20 A,Blue
    Details
  • Description ZDU 2.5/2X2AN/D+
    • Z-series, Component terminal with diode, Feed-through terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Beige
    ZDU 2.5/2X2AN/D-
    • Z-series, Component terminal with diode, Feed-through terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Beige
    Details
  • Modular PE terminal blocks 1 tier ZPE 2.5 - PE terminal, Tension clamp connection, 2.5 mm², 300 A (2.5 mm²), green / yellow ZPE 4 - PE terminal, Tension clamp connection, 4 mm², 480 A (4 mm²), green / yellow ZPE 6 - PE terminal, Tension clamp connection, 6 mm², 720 A (6 mm²), green / yellow ZPE 10 - PE terminal, Tension clamp connection, 10 mm², 1200 A (10 mm²), green / yellow ZPE 16 - PE terminal, Tension clamp connection, 16 mm², 1920 A (16 mm²), green / yellow ZPE 35 - PE terminal, Tension clamp connection, 35 mm², 4200 A (35 mm²), green / yellow Modular PE terminal blocks 2 tier ZDK 2.5 - Double-tier terminal, PE terminal, Tension clamp connection, 2.5 mm², 300 A (2.5 mm²), green / yellow  
    Details
  • A2C 2.5 PE - PE terminal, PUSH IN, 2.5 mm², green / yellow A2C 4 PE - PE terminal, PUSH IN, 4 mm², green / yellow A2C 6 PE - PE terminal, PUSH IN, 6 mm², green / yellow A2C 10 PE - PE terminal, PUSH IN, 10 mm², 1000 V, green / yellow A2C 16 PE - PE terminal, PUSH IN, 16 mm², 1000 V, green / yellow
    Details
  • · Size mm. : 40 · For corrosive gasses and liquids · Class 2.5 according to EN837-1 · Wetted parts Stainless steel · Case stainless steel
    Details
  • - Series: MMN5 - Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Wetted parts Stainless steel (MEP) or Monel (MMN) - Lloyds Register Approval - Safety version S3 according to EN 837-1 - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • · Size mm. : 150 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MIX) or Monel (MIM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • · Size mm. : 63 · For non-corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Case material: Stainless steel · Wetted parts: Brass · OEM applications · Liquid-filled for applications with pulsations or vibrations
    Details
  • · Size mm. : 150 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MIX) or Monel (MIM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • Application Use stylish Concept EMC Enclosures with their convenient quarter-turn latches in indoor or outdoor applications to contain stray electromagnetic interference (EMI) signals produced by internal components and to shield those components from external EMI/RFI interference. Size 10.20 x 10.20 - 34.20 x 22.20
    Details
  • Pressure gauge with contact Series: MG5 (With inductive contact) Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Inductive contacts with sensor according to EN 60947-5-6 (NAMUR) - Option : liquid-filled for applications with pulsations or vibrations - Option: case material 1.4404 (316L) for aggressive atmosphere
    Details
  • - Size 150 mm - For corrosive process fluids and atmospheres - Class 1 according to EN 837-1 - Static pressure max. 400 bar - Wetted parts stainless steel, monel or hastelloy - Option : case material 1.4404 (316 L) for aggressive ambience - Option : solid-front case
    Details
  • - Size 100 mm - For corrosive process fluids and atmospheres - Class 1 according to EN 837-1 - Static pressure max. 400 bar - Wetted parts stainless steel, monel or hastelloy - Option : case material 1.4404 (316 L) for aggressive ambience - Option : solid-front case
    Details
  • ·Size mm. : 160 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel · Approval Lloyd`s Register · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive ambience
    Details
  • · Size mm. : 100 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MEX) or Monel (MEM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • · Size mm. : 63 · For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts: Stainless steel · Case with crimped bezel ring · Lloyds Register Approval · Option: Liquid-filled for applications with pulsations or vibrations · Option: Case material 1.4404 (316L) for aggressive atmosphere
    Details
  • · For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts Stainless steel(MEX) or Monel (MEM) · Lloyd`s Register approval - Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • - Series: MEP5 - Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Wetted parts Stainless steel (MEP) or Monel (MMN) - Lloyds Register Approval - Safety version S3 according to EN 837-1 - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • · Size mm. : 100 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts: Stainless steel · Lloyds Register Approval · Option: Liquid-filled for applications with pulsations or vibrations · Option: Case material 1.4404 (316L) for aggressive atmosphere
    Details
  • · Size mm. : 63 · For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts Stainless steel (MEX) or Monel (MEM) · Lloyd`s Register approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • - Size 150 mm - For corrosive gasses and aggressive atmosphere - Class 1.6 and 2.5 according to EN 837-3 - Wetted parts Stainless steel and Viton® FKM - Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • - Size 100 mm - For corrosive gasses and aggressive atmosphere - lass 1.6 and 2.5 according to EN 837-3 - Wetted parts Stainless steel and Viton® FKM - Option : case material 1.4404 (316L) for aggressive atmosphere
    Details
  • - Size 150 mm -Low pressure measurement - For non-corrosive gasses - Accuracy +/- 2% F.S. - Static pressure max. 250 mbar - Option: case material 1.4404 (316L) for aggressive atmosphere
    Details
  • · Size mm. : 63 · For non-corrosive gasses and liquids · Class 2.5 according to EN 837-1 · Wetted parts: Brass · OEM applications
    Details
  • Markings
    • DEK 5/5 Plus MC (1 sheet=100 tag)
    Dekafix, Terminal marker, 5 x 5 mm, Pitch in mm (P): 5.00 Weidmueller, White,printing in horizontal
    • DEK 5/5 Plus MC (1 sheet=100 tag)
    Dekafix, Terminal marker, 5 x 5 mm, Pitch in mm (P): 5.00 Weidmueller, White,printing in vertical
    • WS 12/5 MC (1 sheet = 72 tags)
    WS, Terminal marker, 12 x 5 mm, Pitch in mm (P): 5.00 Weidmueller, White,printing in vertical Installation material
    Details
  • - Size 150 mm - For corrosive process fluids and atmospheres - Absolute pressure measurement - Accuracy ± 2 % FS - Overpressure max. 25 bar - Housing and wetted parts stainless steel - Option: Liquid-filled for applications with pulsations or vibrations
    Details
  • Pressure gauge with contact Series: MA35 (With analog output) Size 100 mm - Local indication of pressure - Output signal: 4 ... 20mAB
    Details
  • M8 distributor The new slim M8 line from Weidmüller. This range of products is characterised by the marking options at all connection positions. Even the 4-way distributor with 8-pole M12 has adequately large markers at all M8 connection positions. Furthermore, this distributor is shorter than many conventional M8 designs. Very narrow, short and flat M8 distributor. The range is supplied with 4 to 12 M8 connection positions, 3 or 4 poles. Hybrid variants of the M8 are also possible on request. The M8 line is equipped with transverse holes. Industrial Machinery, device manufacturer
    Details
  • - Size 150 mm - Gauges with bellows Ø 150 mm - For corrosive fluids and atmospheres - Dry contacts (CES) - Electrical part conforms to Low Voltage Directive DBT 73/23/CE
    Details
  • M5 distributor Besides being extremely compact, these modules are also very low in weight. But they are still amazingly easy to handle. M5 distributors are supplied as 4- and 8-way modules each with M12, M16 or fixed cable outlets. The plug-in connectors are in 3 or 4 pole design. Marking: Each plug-in station is identified with the plug-in station number. Every initiator LED can be allocated precisely with the letters A and B. Moreover, the distributor and every connection position can be labelled if required. Industrial Machinery, device manufacturer
    Details
  • - Size 150 mm - Gauges with bellows Ø 150 mm For corrosive fluids and atmospheres - Dry contacts (CES) - Electrical part conforms to Low Voltage Directive DBT 73/23/CE
    Details
  • M12 distributor Passive M12 distributors are available in all conceivable forms and configurations. Furthermore, a number of special versions, e.g. SAI distributors for EX zones or the ergonomic M8, are available only from Weidmüller. These innovative products are backed up by numerous proprietary rights. Industrial Machinery, device manufacturer
    Details
  • Lightning and surge protection (SPD) The priority you give to overvoltage protection depends on your willingness to take risks! Perhaps you think "it’ll never happen to me". Then you won’t have lost anything, but will have gained only very little. However, the subject of overvoltage is then a daily worry for you. But if you wish to be on the safe side, you should include overvoltage protection in your corporate strategy. You will profit from such an investment in operational safety and can prevent a disaster with Weidmüller's surge protection for power, signal and data. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • Description This water level transmitter is used for measuring the level of clean water, sewage water, well, river, etc. The detector is placed on the bottom of the water, and the water head pressure acting on the pressure receiving diaphragm is detected, converted into a current signal and then transmitted to a receiving instrument via the connector terminal. Industrial
    • Oil & Gas
    • Pulp & Paper
     
    Details
  • Description The FCX-AIII level transmitter accurately measures liquid level and transmits a proportional 4 to 20 mA signal. The transmitter utilizes a unique micromachined capacitance silicon sensor with state-of-the-art microprocessor technology to provide exceptional performance and functionality. Industrial
    • Oil & Gas
    • Pulp & Paper
    Details
  • Features L&T Valves launches a smart flow-control solution that enhances plant safety and reliability - L&T Valves Asset Management Program, LAMP. This IoT-ready remote valve performance monitoring system leverages expertise in valve manufacture as well as system design and integration. At the core of LAMP is a time-tested SIL3-capable valve - Ball, Butterfly, DBB Plug, Gate or Globe. Each valve is equipped with ValvTrac™ digital traceability tag that cross-links valve signature to traceability information such as valve test certificates, material test certificates, and installation, operation and maintenance manuals. The valves are upgraded to ‘Smart Valves’ by integrating them with next-generation smart sensors that measure parameters such as torque, leakage, vibration, pressure, temperature and position. The data is relayed real-time to a secure, dedicated cloud computing platform where it is analyzed to provide complete valve health and diagnostic information. Valve users can access information through a secure login, or port the data to the native asset management system through any standard field communication protocol (HART, WirelessHART, Foundation Fieldbus, etc.). To a customer, knowledge is trust; the more he knows about the state of a valve, the more confident can he be about its performance. Thus LAMP takes the guesswork out of valve maintenance and allows customers to transition from preventive maintenance based on thumb rules to predictive maintenance based on real data.
    Details
  • Kits The RockStar® kits normally consist of a male insert, a female insert, a plug housing, a bulkhead housing and a cable gland. Weidmüller offers a range of standard plug-in connector combinations with metric or PG cable entry threads, with screw connection or PUSH IN connection. Industrial
    • Machinery
    Details
  • Junction Box The Klippon® brand has long stood for competence and quality in housings, particularly when customer solutions for standard industrial applications and applications in explosive risk zones are concerned. Weidmüller meets these requirements with its range of steel sheet enclosures in the new Klippon® TB series, available in Multi-Hinge (MH) and Quarter-Lock (QL) versions, the Klippon® STB series and the aluminium enclosures of the Klippon® K series. The portfolio is rounded off with the polyester enclosures of the Klippon® POK series and the polycarbonate enclosures. Irrespective of which application users are planning, Weidmüller offers numerous precisely fitting housing solutions and individual services: turnkey enclosures with customer-specific configurations such as terminal rails, drilled holes, cable glands, cutouts, special coatings and much more besides. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • JACKPAC® IP68
    • JACKPAC® IP20 surge protection
    • JACKPAC® test adapter
    Details
  • The IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. The analyzer is capable of measuring up to eight wavelengths in a gas or liquid phase sample. Sample handling and conditioning systems are available as an option that is integrated into the IPS-4s sample cell enclosure. Features
    • Measures up to 8 wavelengths
    • Low cost of ownership
    • No annual, routine maintenance
    • No moving parts
    • IP65 (NEMA 4X optional)
    • Integrated, customizable sample system
    • Ethernet and MODBUS communications
    Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Power
    Details
  • Interfaces The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. The interface components are available as a clear alternative to the point-to-point wiring system in order to reduce costs and to simplify the setup of the electrical cabinets. The main function of this interface is as an adapter between the control devices and field elements. The interfaces consist of: Standard connectors for connection to the control devices. PCB terminals with tension clamp or screw connections for the field connection. Additional components like LEDs, fuses, relays or isolators which can integrate new functions. Profiles and base frames for attaching to standard TS32 and TS35 mounting rails. The pre-assembled cables supplied by Weidmüller are also used to connect the tester with the interface. These are the advantages of the system: Saves time during the installation. No risk of wiring mistakes. Shorter schedules for project planning. Improved order in the electrical cabinet. Saves space in the cable ducts. Small module widths. Industrial
    • Oil & Gas
    • Chemical & Petrochemical
    • Paper
    • Steel
    • Pulp & Paper
    • Electronic
    • Renewable Energy
    • Transportation
    Details
  • Features ISO-TP Low Voltage Insulators, Metric Thread
    • Halogen free
    • High resistance to leakage current
    • Great stability of electrical and mechanical parameters
    • Fiberglass reinforced
    • UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC
    • RoHS compliant
    3.1 Insulator ISO-TP Low Voltage Male/Female Insulators
    • Halogen free
    • High resistance to leakage current
    • Great stability of electrical and mechanical parameters
    • Fiberglass reinforced
    • UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC
    • RoHS compliant
    3.1 male female insulator
    Details
  • Features IBS Advanced Round Insulated Braided Conductor, Halogen Free
    • Resistant to vibration, improving reliability and performance
    • Insulated by high-resistance, halogen free, flame retardant and low smoke material
    • Tinned copper provides superior corrosion resistance• Improves assembly flexibility and aesthetics
    • Quick and easy installation
    • No additional cutting, stripping, crimping and punching needed
    • Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
    • Small wire diameter provides maximum flexibility
    • Dramatically smaller and more flexible than comparable cable based on ampacity
    • Better power density than cable with lower skin effect ratio
    • Reduces total installation cost
    • RoHS compliant
    1.2 IBS IBS/IBSB Advanced Insulated Braided Conductor, Halogen Free
    • Suitable for all main molded case circuit breakers
    • Resistant to vibration, improving reliability and performance
    • Insulated by high-resistance, halogen free, flame retardant and low smoke material
    • Tinned copper provides superior corrosion resistance
    • Improves assembly flexibility and aesthetics
    • Quick and easy installation
    • No additional cutting, stripping, crimping and punching needed
    • Integral palm without lugs or terminals reduces material and assembly weight
    • Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
    • DNV GL® and Bureau Veritas certified for marine and offshore applications
    • Small wire diameter provides maximum flexibility
    • Dramatically smaller and more flexible than comparable cable based on ampacity
    • Better power density than cable with lower skin effect ratio
    • Reduces total installation cost
    • RoHS compliant
    • Tinned copper allows for copper or aluminum conductor connections
    1.2 IBSB IBSHY Insulated Braided Conductor for Compact Circuit Breakers
    • Suitable for all main 125/160 A electrical devices and specifically molded case circuit breakers
    • Resistant to vibration, improving reliability and performance
    • Improves assembly flexibility and aesthetics
    • Quick and easy installation
    • No additional cutting, stripping, crimping and punching needed
    • Small wire diameter provides maximum flexibility
    • Halogen free solution for applications requiring a low smoke solution
    • Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
    • DNV GL® certified for marine and offshore applications
    • High working temperature
    • RoHS compliant
    1.2 IBSHY    
    Details
  • Inserts A heavy-duty connector consists of a connector insert and its protective housing. The insert is therefore the heart of the heavy-duty connector. It is responsible for electrical functioning. Connector inserts from Weidmüller are made from high-quality insulation materials, which allow secure transmission of high voltages in a tight space. Moreover, we use only a single type of plastic in our entire product line. This plastic is UL listed, and suitable for railway applications. This allows unlimited world-wide use of the RockStar® connector. Industrial
    • Machinery
    Details
  • Industrial Ethernet Weidmüller Industrial Ethernet components are the perfect link the data communication between Ethernet enabled devices in industrial automation. By supporting various topologies and protocols, they can be used in many industrial applications. As a complete provider of industrial network infrastructure for machine and equipment manufacture, we offer a wide range of switch products to suit the individual needs of our customers. In particular, Gigabit Switches (unmanaged and managed) and media converters, Power-over-Ethernet switches, WLAN modules and serial/Ethernet converters to meet the highest requirements and provide a reliable and flexible Ethernet communication. An extensive passive product portfolio consisting of RJ 45 and fibre optic connectors and cables make Weidmüller your partner for industrial Ethernet solutions.  
    Details
  • Impactline Flowmeter When a pukverized material charged from a leader falls naturaly from a fixed height the horizonal component of the impact force exerted on the sensing plate will be proportioner to the instantaneous weight flow of the material. This is the basic principle of operation of the impactline Flowmeter. Related Market 1. Petrochemical 2. Coal fire Power 3. Steel 4. Pulp & Paper
    Details
  • Impact Feeder Convenient, inexpensive precision feeder for bulk solids, whose accuracy is not influenced by changes in the substance’s characteristics. The capacity ranges from 0-3 t/h to 0-60 t/h Description
    • The impact Feeder is installed at the hopper's discharge outlet.
    • The grain discharged from the hopper is passed through the gate incorprated in the feeder and flows down along the snesing plate.
    • The load generated on the sensing plate is converted into an electric signal corresponding to the flow rate by the load cell.
    • Based on the control signal, the gate is driven by a built-in motor to control the grain to it's target flow rate.
    Related Market 1. Petrochemical 2. Coal Fire Power 3. Steel 4. Pulp & Paper
    Details
  • IE-SW-BL08-8TX Network switch, unmanaged, Fast Ethernet, Number of ports: 8x RJ45, IP30, -10 °C...60 °C
    Details

Title

Go to Top