- Complete range of earth/ground flexible connections from 6 - 100 mm² (11.84 - 197.35 kcmil) cross section and from 100 - 500 mm (3.937" - 19.685") length
- Integral palm, without tin or crimped lugs for superior electrical contact and tensile strength resistance
- Resistant to vibration and fatigue, reducing maintenance
- Provides weight savings, material savings and lower impedance when compared to similar lugged cables with insulation
- Ready to use out of the box, eliminates the need for cutting, stripping, crimping and punching
- Quick and easy to install
- Recommended by the EMC/EMI directives and less impedance than cables
- EAC compliant
- RoHS compliant
-
Features MBJ Grounding and Bonding Braid, Tinned Copper MBJ Grounding and Bonding Braids are a reliable and convenient grounding solution for applications that require flexibility and durability. The tinned copper ground braids with massivated palms come ready to install without any additional cutting, stripping, crimping or punching and do not require the addition of tin or crimped lugs. The proprietary manufacturing process optimizes the electrical contact between each wire and helps eliminate moisture issues in the palms, preventing corrosion and lengthening the useful life of the braid. -
Features RRCB Round Braid in Coil, Plain Copper- Braids in coil are mainly used for power distribution or earthing applications
- Non-magnetic material
- RRCBI Insulated Round Braid in Coil, Plain Copper
- RTCBI Insulated Round Braid in Coil, Tinned Copper
- RRCBI Insulated Round Braid in Coil, Plain Copper
- RTCBI Insulated Round Braid in Coil, Tinned Copper
- For screening connecting cables between equipment used in an electromagnetically disturbed environment
- Supplied with draw wire
-
Features FRCB Flat Braid in Coil, Plain Copper- Braids in coil are mainly used for power distribution or earthing applications
- Non-magnetic material
- High-quality durable stainless steel 316L provides superior abrasion, corrosion, chemical, and UV resistance for outdoor and corrosive applications
- Non-magnetic material
- Duribility of product lengthens cycle time between maintainance
- Braids in coil are mainly used for power distribution or earthing applications
- Non-magnetic material
- Tinned finish provides a theft-deterrent appearance
- Braids in coil are mainly used for power distribution or earthing applications
- Non-magnetic material
- Tinned finish provides a theft-deterrent appearance
-
Features ABS Adjustable Busbar Support Profile- For use with ABS Adjustable Busbar Support Insulator Modules
- Drill holes in field for custom distances between phases
- Improve bending resistance by interlocking or stacking two profiles
- Attach profiles together or attach profile to the panel structure using ABS Adjustable Busbar Support Profile Stiffener
- RoHS compliant
- For use with ABS Adjustable Busbar Support Insulator Modules
- Factory punched holes for quick assembly
- Improve bending resistance by interlocking or stacking two profiles
- Attach profiles together or attach profile to the panel structure using ABS Adjustable Busbar Support Profile Stiffener
- RoHS compliant
- Modules provide flexibility to select distance between phases and supports
- Extremely robust construction
- Halogen free insulators
- RoHS compliant
- Kit includes rail, insulators and mountable extension arms
- Adjustable distances between phases
- Adjusts quickly to accommodate multiple busbar thicknesses
- High resistance to short-circuit forces
- Provides excellent electrical protection for equipment
- Three phase with neutral circuit
- Halogen free
- RoHS compliant
- For all busbar types and nVent ERIFLEX Erilink busducts
- Improve bending resistance by interlocking or stacking two profiles
- Quick and easy to install
- Halogen free insulators
- RoHS compliant
- Universal busbar support
- End cover available to prevent busbar from sliding out of position
- Clips available to accommodate multiple busbar widths
- RoHS compliant
- Support for threaded busbars
- Three phase with neutral circuit
- Plastic positioning pin for bar location
- Adjusts quickly to accommodate multiple busbar widths
- Protection screen can be fixed using spacers
- A ground can be mounted on either side
- Halogen free Material: Steel; Glass Fibre Reinforced Polyamide; Aluminum
- Supports busbars at an angle for easy connections
- Includes mounting holes for direct fixing of protection screen
- Adjustable arms for easy mounting
- Three phase with neutral circuit
- Halogen free
- Universal busbar support
- End cover available to prevent busbar from sliding out of position
- Halogen free
- RoHS compliant
- Universal busbar support
- Three phase with neutral circuit
- End cover available to prevent busbar from sliding out of position
- Halogen free
- RoHS compliant
- Create custom four pole distribution blocks for an electrical distribution system
- Protection screen can be attached directly to the support
- Includes screws to mount threaded copper busbars
- Clips on to DIN rail using DR-CLIP or mounts with screws
- Halogen free
- RoHS compliant
- Create custom four pole distribution blocks for an electrical distribution system
- Mounts with screws
- Protection screen can be fixed using spacers
- Halogen free
- RoHS compliant
- Create custom four pole distribution blocks for an electrical distribution system
- Protection screen can be attached directly to the support
- Includes screws to mount threaded copper busbars
- Easily clips onto DIN rail or mounts to panel with screws
- Halogen free
- RoHS compliant
- Universal fixing system
- Installs quickly and easily
- Extremely robust construction
- Adjustable arms for easy mounting
- Halogen free insulators
-
Features PCB Plain Copper Busbar DPCB Punched Plain Copper Busbar, Single DPCB Punched Plain Copper Busbar, Double- Heavy-duty power connection
- Circuit breaker, generator and prefabricated power network conductor
- Alternative to large and multiple cables
- Earth/ground connection
- Power distribution
- Rounded edges
- Heavy-duty power connection
- Circuit breaker, generator and prefabricated power network conductor
- Alternative to large and multiple cables
- Earth/ground connection
- Power distribution
- Rounded edges
- End holes can be used to fix busbar to a support or connect the main input conductor
- Heavy-duty power connection
- Circuit breaker, generator and prefabricated power network conductor
- Alternative to large and multiple cables
- Earth/ground connection
- Power distribution
- Rounded edges
- End slots can be used to fix busbar to a support or connect the main input conductor
- Heavy-duty power connection
- Circuit breaker, generator and prefabricated power network conductor
- Alternative to large and multiple cables
- Earth/ground connection
- Power distribution
- Rounded edges
- Threaded hole pattern provides 40% more connections
- End slots can be used to fix busbar to a support or connect the main input conductor
- Heavy-duty power connection
- Circuit breaker, generator and prefabricated power network conductor
- Alternative to large and multiple cables
- Earth/ground connection
- Power distribution
- Rounded edges
-
nVent ERICO Connecting, Earthing and Neutral Busbars are used to connect several earthing conductors within a panel and can be used in a variety of different applications including switchgear and control equipment, electrical equipment, for wind and solar power generation and in data centers. Features Grounding Busbars Proper bonding is essential to create an equipotential plane between service grounds and equipment during fault and transient conditions. This equipotential plane provides a near zero voltage differential and serves to protect people and equipment during these events. The most popular bonding product in use today is the ground bar or bonding bar. Ground bars provide a convenient, single-point grounding and bonding location. Conductors are welded to the bar using a nVent ERICO Cadweld exothermic connection or are mechanically fastened by using lugs. nVent can design and manufacture custom bars. In addition, the breadth of the product offering includes TMGB bars, which meet the requirements of TIA/EIA® 607 and conform to BICSI® recommendations. Our perimeter bus system allows for fast and easy field installation of halo and other perimeter grounding schemes. 3.2 earth bar3.2 grounding busbars Earthing/Grounding Connector- Very compact clamp for connecting cable conductors to earthing busbar without drilling
- Conductor is clamped with a pressure plate
- Clamps can be mounted and slid into position on busbar prior to connecting conductors
- Connections can be added after busbar has been mounted
- Single screw locks clamp and makes connection
- EAC compliant
- RoHS compliant
- Use to connect several earthing conductors within a panel
- Chamfered holes allow for easy connections
- Mounting slots for universal fixing to copper busbar, directly to rails or spacers
- Rigid bar
- Mounting kits available for stacking busbars or fixing to DIN rail
- RoHS compliant
-
Features ISO-TP Low Voltage Insulators, Metric Thread- Halogen free
- High resistance to leakage current
- Great stability of electrical and mechanical parameters
- Fiberglass reinforced
- UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC
- RoHS compliant
- Halogen free
- High resistance to leakage current
- Great stability of electrical and mechanical parameters
- Fiberglass reinforced
- UL® Recognized in E125470 and evaluated for dielectric withstand rating of 1,500 VAC/DC
- RoHS compliant
-
nVent ERICO offers a wide range of halogen free lug-to-lug, lug-to-tunnel, and tunnel-to-tunnel power terminals and fixing assemblies. The tinned copper block design allows for connections using copper or aluminum conductors while the accessible tunnels and studs allow for easy connections that can be visually inspected through the adjustable finger safe transparent cover. Conveniently gangable to allow for the construction of multi-pole power blocks, the power terminals are easily mounted onto DIN rails or directly to the panel itself using screws. Features Lug-to-Lug Power Terminals (SBLL 250, 500, 800)- Tinned copper block allows for copper or aluminum conductor connections
- Accessible studs allow for easy connection of sections of nVent ERIFLEX Flexibar or other conductors
- Design allows for visual inspection of conductor and confirmation of connection
- Adjustable transparent cover
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- SBLEC Power Terminals Fixing Accessory required for direct panel mount
- Halogen free
- RoHS compliant
- Tinned copper block allows for copper or aluminum conductor connections
- Accessible studs and tunnels allow for easy connection of nVent ERIFLEX Flexibar and other conductors
- Design allows for visual inspection of conductor and confirmation of connection
- Voltage detection and measurement connection
- Adjustable transparent cover
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- SBLEC Power Terminals Fixing Accessory required for direct panel mount
- Halogen free
- RoHS compliant
- Tinned copper block allows for copper or aluminum conductor connections
- Accessible tunnels allow for easy connection of wire
- Design allows for visual inspection of conductor and confirmation of connection
- Adjustable transparent cover
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- SBLEC Power Terminals Fixing Accessory required for direct panel mount
- Halogen free
- RoHS compliant
- Attach power terminal fixing accessory to back of power terminals for direct panel mounting or DIN rail end cap mounting
- Easily clips onto DIN rail or mounts to panel with screws
- Halogen free
-
nVent ERIFLEX Power Blocks are the main DIN mounted output/input devices for connection between primary and secondary switchboard, or main input/output connection for machine or industrial equipment (such as invertor, air conditioning machines, etc.). The high short circuit rated large cross section blocks offer time savings and reliability in every panel configuration. The complete Power Blocks range offers multiple connection types with up to four cables, nVent ERIFLEX Flexibar Advanced, or IBS/IBSB Advanced power braids. Features- Can be connected with round cross section cable or flat connection system like nVent ERIFLEX Flexibar Advanced or IBS/IBSB Advanced Insulated Braided Conductor
- Compact power block with high short circuit current rating
- Tinned copper or aluminum block allows for copper or aluminum conductor direct connections, or using ferrule
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- Voltage detection and measurement connection
- 95% fill ratio
- Halogen free
- RoHS compliant
-
Features TD Compact Four Pole Distribution Block- Minimum space for maximum power
- Protection cover and insulating screens are transparent
- Insulating screen between each row
- Easy and safe connections
- Easily clips onto DIN rail or mounts to panel with screws
- Solid bars provide reliability
- Wiring with or without terminal
- Halogen free
- RoHS compliant
- Connect nVent ERIFLEX Flexibar, insulated braided conductor or cable with lug on line side
- Tinned copper bars allows for copper or aluminum cable
- Transparent protection covers
- Easy and safe connections
- Easily clips onto DIN rail or mounts to panel with screws
- Solid bars provide reliability
- Input separated from outputs
- Supports wiring from both sides
- Design allows for visual inspection of conductor and confirmation of connection
- Large end terminals
- High percentange of fill ratio
- Wiring with or without terminal
- Halogen free
- RoHS compliant
- Attaches to four pole distribution blocks for increased wire capacity
- Direct electrical connection
- Strong mechanical assembly
- Transparent protection cover
- Halogen free
- RoHS compliant
-
Features BD Two Pole Distribution Block- Minimum space for maximum power
- Protection cover and insulating screens are transparent
- Insulating screen between each row
- Easy and safe connections
- Easily clips onto DIN rail or mounts to panel with screws
- Halogen free
- RoHS compliant
-
nVent ERIFLEX offers a wide selection of compact halogen free single pole, two pole, and four pole distribution blocks and a complete range of assembly support products for easy fastening to DIN rails or steel sheet. The blocks offer easy assembly with visual inspection to allow for confirmation of connections to a wide range of conductors including nVent ERIFLEX Flexibar Advanced and IBS/IBSB Advanced. The high fill ratio ensures optimal electrical connectivity even in tight assemblies. Features UD-80A Single Pole Distribution Block- Increase the number of outputs with one input using a jumper wire
- Tinned copper block allows for copper or aluminum conductor connections
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Increase the number of outputs with one input using a jumper
- Tinned copper block allows for copper or aluminum conductor connections
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Increase the number of outputs with one input using a jumper
- Tinned copper block allows for copper or aluminum conductor connections
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS complian
- Connects nVent ERIFLEX Flexibar on line side using FLG-250 Flat Terminal Connection
- Tinned copper block allows for copper or aluminum conductor connections
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Connects nVent ERIFLEX Flexibar on line side using FLG-400 Flat Terminal Connection
- Tinned copper block allows for copper or aluminum conductor connections
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Ideal for solar applications
- Tinned aluminium block allows for copper or aluminum cable
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Ideal for solar applications
- Tinned copper block allows for copper or aluminum conductor connections
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Ideal for solar applications
- Increase the number of outputs with one input using a jumper
- Tinned aluminium block allows for copper or aluminum cable
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Ideal for solar applications
- Increase the number of outputs with one input using a jumper
- Tinned copper block allows for copper or aluminum conductor connections
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Directly connect nVent ERIFLEX Flexibar on line side
- Tinned copper block allows for copper or aluminum conductor connections
- Screw retaining cover is hinged and removable
- Design allows for visual inspection of conductor and confirmation of connection
- Modular snap-together blocks for building multi-pole power blocks
- Easily clips onto DIN rail or mounts to panel with screws
- 95% fill ratio
- Halogen free
- RoHS compliant
- Connects nVent ERIFLEX Flexibar or IBSB/IBSBR Power Braid to UD-250A/400A Single Pole Distribution Block
- Provides direct link between blocks and switch or circuit breakers
-
Features HCBC High Current Busbar Clamp- Connects copper busbar to copper busbar, nVent ERIFLEX Flexibar or power shunt
- Made with non-magnetic materials for high current connections between nVent ERIFLEX Flexibar and rigid busbars such as transformer terminals
- Rigid design assures even contact pressure
- Installs quickly and easily
- Ideal for on site modifications
- RoHS compliant
- Very compact clamp for connecting cable conductors or nVent ERIFLEX Flexibar to busbar without drilling
- Conductor is clamped with a pressure plate
- Clamps can be mounted and slid into position on busbar prior to connecting conductors
- Connections can be added after busbar has been mounted
- Single screw locks clamp and makes connection
- EAC compliant
- RoHS compliant
- Connects nVent ERIFLEX Flexibar to punched busbar
- Allows for excellent electrical contact
- Compact, space saving design
- Installs quickly and easily
- Ideal for on site modifications
- Connects two copper busbars together or nVent ERIFLEX Flexibar to copper busbar
- Two ribbed plates complete with screws
- Allows for excellent electrical contact
- Installs quickly and easily
- Ideal for on site modifications
- RoHS complian
- Connects nVent ERIFLEX Flexibar to copper busbar
- Two plates complete with screws
- Allows for excellent electrical contact
- Installs quickly and easily
- Ideal for on site modifications
- RoHS compliant
-
Features PBC Braided Power Shunt- Ideal for transformer-busduct link
- Solid palms can be drilled to fit customer specific designs
- Extra flexible power connection and good resistance to vibration
- Press welded laminations are welded to each other through direct current applied to pieces under pressure
- Press welding forms a solid palm with the properties of a plain bar
- Smaller cross section for same capacity
- Runs cooler than equal section
-
Features IBS Advanced Round Insulated Braided Conductor, Halogen Free- Resistant to vibration, improving reliability and performance
- Insulated by high-resistance, halogen free, flame retardant and low smoke material
- Tinned copper provides superior corrosion resistance• Improves assembly flexibility and aesthetics
- Quick and easy installation
- No additional cutting, stripping, crimping and punching needed
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- Small wire diameter provides maximum flexibility
- Dramatically smaller and more flexible than comparable cable based on ampacity
- Better power density than cable with lower skin effect ratio
- Reduces total installation cost
- RoHS compliant
- Suitable for all main molded case circuit breakers
- Resistant to vibration, improving reliability and performance
- Insulated by high-resistance, halogen free, flame retardant and low smoke material
- Tinned copper provides superior corrosion resistance
- Improves assembly flexibility and aesthetics
- Quick and easy installation
- No additional cutting, stripping, crimping and punching needed
- Integral palm without lugs or terminals reduces material and assembly weight
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- DNV GL® and Bureau Veritas certified for marine and offshore applications
- Small wire diameter provides maximum flexibility
- Dramatically smaller and more flexible than comparable cable based on ampacity
- Better power density than cable with lower skin effect ratio
- Reduces total installation cost
- RoHS compliant
- Tinned copper allows for copper or aluminum conductor connections
- Suitable for all main 125/160 A electrical devices and specifically molded case circuit breakers
- Resistant to vibration, improving reliability and performance
- Improves assembly flexibility and aesthetics
- Quick and easy installation
- No additional cutting, stripping, crimping and punching needed
- Small wire diameter provides maximum flexibility
- Halogen free solution for applications requiring a low smoke solution
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- DNV GL® certified for marine and offshore applications
- High working temperature
- RoHS compliant
-
Features Flexibar Advance, Tinned Copper- Thin layers of tinned electrolytic copper formed into a stack
- Full range from 19.5 mm² up to 1200 mm² and 125 A to 2800 A
- Insulated by high-resistance, halogen free, flame retardant and low smoke material with less than 20% contact with conductor for high flexibility
- Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint
- Dramatically smaller and more flexible than comparable cable based on ampacity
- Better power density than cable with lower skin effect ratio
- Connections made by punching and bolting directly through the copper laminates or clamping onto the end of the nVent ERIFLEX Flexibar
- No lugs needed, reducing installation time and improving resistance to vibration
- Weight savings and material savings compared to wire alternatives
- Reduces total installation cost
- Traceability codes and designation part numbers printed on insulation
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- 100% production dielectric tested
- RoHS compliant
- Tinned copper allows for copper or aluminum conductor connections
- Halogen free solution for applications requiring a low smoke solution
- Thin layers of bare electrolytic copper formed into a stack
- Silver or tinned nVent ERIFLEX Flexibar Summum available on request
- Insulated by halogen-free, high-temperature silicone
- Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint
- Dramatically smaller and more flexible than comparable cable based on ampacity
- Better power density than cable with lower skin effect ratio
- Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the nVent ERIFLEX Flexibar, or welding using nVent ERICO Cadweld
- No lugs needed, reducing installation time and improving resistance to vibration
- Weight savings and material savings compared to wire alternatives
- Reduces total installation cost
- Very high resistance to UV and ozone
- Limiting oxygen index (LOI)
- Traceability codes and designation part numbers printed on insulation
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- EAC compliant
- RoHS compliant
- Suitable for all main molded case circuit breakers
- Resistant to vibration, improving reliability and performance
- Insulated by high-resistance, halogen free, flame retardant and low smoke material
- Tinned copper provides superior corrosion resistance
- Improves assembly flexibility and aesthetics
- Quick and easy installation
- No additional cutting, stripping, crimping and punching needed
- Integral palm without lugs or terminals reduces material and assembly weight
- Conforms to NF EN 45545 obtaining an HL2 classification for chapters R22 and R23
- DNV GL® and Bureau Veritas certified for marine and offshore applications
- Small wire diameter provides maximum flexibility
- Dramatically smaller and more flexible than comparable cable based on ampacity
- Better power density than cable with lower skin effect ratio
- Reduces total installation cost
- RoHS compliant
- Tinned copper allows for copper or aluminum conductor connections
Market:
Scan for Product Catalogue
-
Features Size 2" to 72" (50 mm to 1800 mm) ASME Class Class 150 to 2500 Design Standard API 600, API 603, ASME B 16.34 Special Features & Benefit Gate Valve design complies to API 600, Edition 13 Offered with API 600 monogram Fugitive Emissions - Complies to API 624 and ISO 15848-1 (<50 ppm / Class AH leakage levels, optional) Gate Valves tested to API 624 at Yarmouth Research Lab, Maine, USA Body gasket leakage <100 ppm observed on eight sizes tested as per API 624 Annexure A Fire Safe - By design and tested to API 607/ ISO 10497 CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H PED Module B1 Design Examination Certificate (certified by DNV) available Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment SIL 3 Safety Integrity Level for Automated Valves Gate valves successfully tested to Shell Design Validation Test Procedure 77/300 and witnessed by Shell Inspectors Robust stem-wedge design connection successfully tested as per API RP 591 Annex B Hardfaced body guides and wedge slots (sizes >24”) Inconel overlay/ cladded options offered -
Gas filled thermometer Series: TSSE (Direct reading with contact) Size 100, 160 mm. - For corrosive gasses and liquids - Class 1 according to EN 13190 - Wetted parts and case material stainless steel - Mechanical or inductive contacts - Option: case material 1.4404 (316L) for aggressive atmosphere -
Gas filled thermometer Series: TSS (Direct measurement) Size 63 - 250 mm. - For corrosive gasses and liquids - Class 1 according to EN 13190 - Wetted parts and case material stainless steel - Option: case material 1.4404 (316L) for aggressive atmosphere -
Gas filled thermometer Series: TSFE (Remote measurement with contact) Size 100, 160 mm. - For corrosive gasses and liquids - Class 1 according to EN 13190 - Capillary 0.5 to 30 m - Mechanical or inductive contacts - Wetted parts and case material stainless steel - Option : case material 1.4404 (316L) for aggressive atmosphere -
Gas filled thermometer Series: TSF (Remote measurement) Size 63 – 250 mm. - For corrosive gasses and liquids - Class 1 according to EN 13190 - Capillary 0.5 to 30 m - Wetted parts and case material stainless steel - Option : case material 1.4404 (316L) for aggressive atmosphere -
Bi - Metal Thermometers Series: TBX (Conical immersion tube) Size 80 – 160 mm. - Conical immersion tube - Class 1 according to EN 13190 - Immersion tube brass - Installed length 62 mm -
Bi - Metal Thermometers Series: TBL (For air ducts) Size 80, 100 mm. - Thermometer for direct mounting on air ducts in ventilation systems - Class 1 according to EN 13190 - Immersion tube brass - Immersion length 165 mm -
Bi - Metal Thermometers Series: TBI (Stainless steel, IP 67) Size 80 – 160 mm. - For corrosive gasses and liquids - Class 1 and 2 according to EN 13190 - Wetted parts Stainless steel - Option : case material 1.4404 (316L) for aggressive atmosphere -
Bi - Metal Thermometers Series: TBHI (Heavy industry version, IP68) Size 100, 130 mm. - For corrosive gasses and liquids - Reinforced version for harsh conditions - Class 1 and 2 according to EN 13190 - Wetted parts Stainless steel - Option : case material 1.4404 (316L) for aggressive atmosphere - Option : filling fluid in the case to avoid moisture and for applications with vibrations -
Bi - Metal Thermometers Series: TBHA (Clam-on thermometer) Size 80, 100 mm. - For clamp-on mounting on isolated pipes - Pipe diameter ¾" to 2" - Class 1 according to EN 13190 - Immersion tube brass -
Bi - Metal Thermometers Series: TB80, TB100, TB160 (Industrial standard type) Size 80, 100, 160 mm. - Multi-purpose standard thermometer - Class 1 and 2 according to EN 13190 - Immersion tube brass (option stainless steel) - Immersion length 100 – 1000 mm -
Bi - Metal Thermometers Series: TB40, TB63 (Industrial standard type) Size 40, 63 mm. - Multi-purpose standard thermometer - Class 1 and 2 according to EN 13190 - Immersion tube stainless steel - Immersion length 100 – 400 mm -
Thermowells Series: T8416, T8916, T9144, T9357 (Welded connection) Series: T8410, T8911, T9093, T9143, T9346 (Screwed connection) Size Max. 250 bar - 360° positioning of the thermometer dial - For thermometers with smooth immersion tube without process connection - Welded or threaded - Brass, steel & stainless steel (1.4571 / 316Ti) -
Temperature switches Series: RTN, RTNY, RTNE (Industrial mechanic temperature switch) Size -46 - 0°C to 200 - 270 °C - Excellent repeatability - Dead band adjustment for regulation - Fix dead band for control and alarm -
Temperature switches Series: RT2N, RT2Y, RT2E (Compact mechanic temperature switch) Size -46 - 0°C to 160 - 250 °C - Excellent repeatability - Dead band adjustment for regulation - Fix dead band for control and alarm - Resistant to accidental over temperature - Light weight -
Pressure gauge with contact Series: MA35 (With analog output) Size 100 mm - Local indication of pressure - Output signal: 4 ... 20mAB -
Pressure gauge with contact Series: MG5 (With inductive contact) Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Inductive contacts with sensor according to EN 60947-5-6 (NAMUR) - Option : liquid-filled for applications with pulsations or vibrations - Option: case material 1.4404 (316L) for aggressive atmosphere -
Standard seal Series: DT8 (standard seal for high pressure) Size 0 - 40 bar to 0 - 400 bar - Wide range of threated process connections - Internal welded diaphragm - Lower part exchangeable - Option : exotic materials for wetted parts - Option : with cleaning ring -
Standard seal Series: DT5 (for very high pressure) Size 0 - 160 bar to 0 - 1000 bar - Wide range of threated process connections - Internal welded diaphragm - Lower part exchangeable - Option : exotic materials for wetted parts - Option : with cleaning ring -
Standard seal Series: DT3 (for low pressure) Size 0 - 160 bar to 0 - 25 bar - Wide range of threated process connections - Internal welded diaphragm - Lower part exchangeable - Option : exotic materials for wetted parts - Option : with cleaning ring -
Standard seal Series: DT2 (for normal pressure) Size 0 - 1 bar to 0 - 40 bar - Wide range of threated process connections - Internal welded diaphragm - Lower part exchangeable - Option : exotic materials for wetted parts - Option : with cleaning ring -
Standard seal Series: DT1 (for medium high pressure) Size 0 - 10 bar to 0 - 160 bar - Wide range of threated process connections - Internal welded diaphragm - Lower part exchangeable - Option : exotic materials for wetted parts - Option : with cleaning ring -
Flange seal Series: D820 (flush diaphragm) Size 0 - 160 mbar to 0 - 420 bar - Pressure range from 160 mbar to 400 bar - Flush diaphragm - Temperature -40 °C … 400 °C - Class 150 to 2500 - NPS 1"1/4 to 4" - PN10 to PN100 - DN25 to DN100 -
Flange seal Series: D6xx (seal with extended flange) Size 0 - 160 mbar to 0 - 160 bar - Pressure range from 160 mbar to 160 bar - Temperature -60 °C … 200 °C - Class 150 to 900 - NPS 1/2" to 2"1/2 - PN10 to PN160 - DN10 to DN65 -
Series: D4xx (diaphragm not flush) Size 0 - 160 mbar to 0 - 420 bar - Pressure range from 160 mbar to 160 bar - Temperature -60 °C … 200 °C - Class 150 to 900 - NPS 1/2" to 2"1/2 - PN10 to PN160 - DN10 to DN65 -
Screwed connection Series: D04x (Stainless steel) Size 0 - 1 bar to 0 - 250 bar - Low cost chemical seal - Should not be used in environments with strong vibrations or strong overpressures. -
Screwed connection Series: D030 (Plastic) Size 0 - 2.5 bar to 0 - 10 bar - Body in Polypropylene EPDM embrane lined with PTFE -
Series: AMFD (Manifold) Size Max. 420 bar - For corrosive gasses and liquids - Isolating, purging and calibration of measuring instruments - For pressure gauges, pressure switches and transmitters - Gauge, absolute and differential pressure - Full stainless steel - Option: NACE conform -
Series: ASIP (Syphon) Size Max. 400 bar - Cooling adapters, hunting horn siphons, U-type siphons - Steel and stainless steel - Max. 400 °C - Max. 400 bar -
Series: ARPX (Shut-off valve) Size Max. 400 bar - Gauge cocks in brass - Gauge valves in brass, steel and stainless steel - With or without test flanges - Isolating of pressure gauges from the process fluid -
Series: ARA (Pulsation dampener) Size Max. 600 bar - Improves readability of pressure gauges - Reduces the effect of pulsations - Max. 600 bar - Max. 250 °C - Option: NACE conform -
Series: AORP (Pressure limiter) Size Max. 700 bar - For corrosive gasses and liquids - Protection of instruments from over pressure - For pressure gauges, pressure switches and transmitters - Option: NACE conform -
Series: AKPL (Capillary) Size Max. 400 bar - 4 types of capillaries - 2 different internal diameters - 1 to 30 meters - Stainless steel -
Series: AGW, AGF (Process thermowells) connection) Size Max. 600 bar - Stainless steel - Max. 500 °C - Max. 1000 mm -
Series: 1650 (Tubular seal for flange mounting) Size 0 - 1.6 mbar to 0 - 250 bar - Directly integrated in the pipe - Mounted between 2 flanges - Wetted parts 1.4571 (316Ti) or 1.4404 (316L) - Easy and fast installation -
- Size 150 mm -Low pressure measurement - For non-corrosive gasses - Accuracy +/- 2% F.S. - Static pressure max. 250 mbar - Option: case material 1.4404 (316L) for aggressive atmosphere -
- Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Mechanical contacts 1 or 2 set points - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere -
- Size 150 mm - Gauges with bellows Ø 150 mm - For corrosive fluids and atmospheres - Dry contacts (CES) - Electrical part conforms to Low Voltage Directive DBT 73/23/CE -
- Size 150 mm - For corrosive process fluids and atmospheres - Absolute pressure measurement - Accuracy ± 2 % FS - Overpressure max. 25 bar - Housing and wetted parts stainless steel - Option: Liquid-filled for applications with pulsations or vibrations -
- Size 150 mm - For corrosive gasses and aggressive atmosphere - Class 1.6 and 2.5 according to EN 837-3 - Wetted parts Stainless steel and Viton® FKM - Option : case material 1.4404 (316L) for aggressive atmosphere -
- Size 100 mm - For corrosive gasses and aggressive atmosphere - lass 1.6 and 2.5 according to EN 837-3 - Wetted parts Stainless steel and Viton® FKM - Option : case material 1.4404 (316L) for aggressive atmosphere -
- Size 100 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - Wetted parts Stainless steel (MTX5) or Brass (MTA5) For non-corrosive (MTA5) and corrosive gases (MTX5) -
- Size 50 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - Wetted parts Stainless steel (MTX5) or Brass (MTA5) - For non-corrosive (MTA5) and corrosive gases (MTX5) -
- Size 63 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - For clean and non-corrosive gases -
- Size 50 mm - Low pressure measurements - Class 1.6 according to EN 837-3 - For clean and non-corrosive gases -
- Size 150 mm - Gauges with bellows Ø 150 mm For corrosive fluids and atmospheres - Dry contacts (CES) - Electrical part conforms to Low Voltage Directive DBT 73/23/CE -
- Size 150 mm - For corrosive process fluids and atmospheres - Accuracy ± 2 % F.S. - Static pressure max. 100 bar - Housing and wetted parts stainless steel -
- Size 150 mm - For corrosive process fluids and atmospheres - Class 1 according to EN 837-1 - Static pressure max. 400 bar - Wetted parts stainless steel, monel or hastelloy - Option : case material 1.4404 (316 L) for aggressive ambience - Option : solid-front case -
- Size 100 mm - For corrosive process fluids and atmospheres - Class 1 according to EN 837-1 - Static pressure max. 400 bar - Wetted parts stainless steel, monel or hastelloy - Option : case material 1.4404 (316 L) for aggressive ambience - Option : solid-front case -
- Series: MMN5 - Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Wetted parts Stainless steel (MEP) or Monel (MMN) - Lloyds Register Approval - Safety version S3 according to EN 837-1 - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere -
- Series: MEP5 - Size 100 mm - For corrosive gasses and liquids - Class 1 according to EN 837-1 - Wetted parts Stainless steel (MEP) or Monel (MMN) - Lloyds Register Approval - Safety version S3 according to EN 837-1 - Option : liquid-filled for applications with pulsations or vibrations - Option : case material 1.4404 (316L) for aggressive atmosphere -
· For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts Stainless steel(MEX) or Monel (MEM) · Lloyd`s Register approval - Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
·Size mm. : 160 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel · Approval Lloyd`s Register · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive ambience -
· Size mm. : 150 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MIX) or Monel (MIM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 150 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MIX) or Monel (MIM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 100 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts: Stainless steel · Lloyds Register Approval · Option: Liquid-filled for applications with pulsations or vibrations · Option: Case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 100 · For corrosive gasses and liquids · Class 1 according to EN 837-1 · Wetted parts Stainless steel (MEX) or Monel (MEM) · Lloyds Register Approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 63 · For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts Stainless steel (MEX) or Monel (MEM) · Lloyd`s Register approval · Option : liquid-filled for applications with pulsations or vibrations · Option : case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 63 · For corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Wetted parts: Stainless steel · Case with crimped bezel ring · Lloyds Register Approval · Option: Liquid-filled for applications with pulsations or vibrations · Option: Case material 1.4404 (316L) for aggressive atmosphere -
· Size mm. : 63 · For non-corrosive gasses and liquids · Class 2.5 according to EN 837-1 · Wetted parts: Brass · OEM applications -
· Size mm. : 63 · For non-corrosive gasses and liquids · Class 1.6 according to EN 837-1 · Case material: Stainless steel · Wetted parts: Brass · OEM applications · Liquid-filled for applications with pulsations or vibrations -
· Size mm. : 40 · For corrosive gasses and liquids · Class 2.5 according to EN837-1 · Wetted parts Stainless steel · Case stainless steel